Environmental Irradiation Test Facility

Results from a detailed analysis of sulfur dioxide (SO₂) reductions achievable through “deep” physical coal cleaning (PCC) at 20 coal-fired power plants in the Ohio-Indiana-Illinois region are presented here. These plants all have capacities larger than 500 MWe, are currently without any flue gas desulfurization (FGD) systems, and burn coal of greater than l%sulfur content (in 1980). Their aggregate emissions of 2.4 million tons of SO₂ per year represents 55% of the SO₂ inventory for these states. The principal coal supplies for each power plant were identified and characterized as to coal seam and county of origin, so that published coal-washability data could be matched to each supplier. The SO₂ reductions that would result from deep cleaning each coal (Level 4) were calculated using an Argonne computer model that assumes a weight recovery of 80%. Percentage reductions in sulfur content ranged from zero to 52%, with a mean value of 29%, and costs ranged from a low of $364/ton SO₂ removed to over $2000/ton SO₂ removed. Because coal suppliers to these power plants employ some voluntary coal cleaning, the anticipated emissions reduction from current levels should be near 20%. Costs then were estimated for FGD systems designed to remove the same amount of SO₂ as was achieved by PCC through the use of partial scrubbing with bypass of the remaining flue gas. On this basis, PCC was more cost-effective than FGD for about 50% of the plants studied and had comparable costs for another 25% of the plants. Possible governmental actions to either encourage or mandate coal cleaning were identified and evaluated     

Weighted road density: A simple way of assigning traffic-related air pollution exposure

BackgroundExisting traffic variables used for predicting NO₂ in epidemiological studies are either difficult to acquire or explain only a small proportion of the variance. The purpose of this study was to develop and validate a new predictor, weighted road density, which combines the maximum amount of information related to traffic into a single variable without the requirement of obtaining traffic counts for a given area.MethodTwo week NO₂ samples were collected using the readings of up to 32 passive samplers on 3 separate rounds between September and December 2006 and again in 2007. Several types of traffic related explanatory variables based on traffic counts, distance to main road and the proposed weighted road density were constructed using GIS software, and tested for association with the NO₂ samplers. Assessment of the best model was based on R² values, as well as leave-one-out cross validation.ResultsThe weighted road density variable and the density variable based on traffic counts resulted in a similar R² (0.59) for predicting NO₂, although weighted road density was much easier to construct and outperformed other variables such as distance to main road.ConclusionAs well as being a powerful predictor for use in a land use regression model, weighted road density can be used as a proxy for exposure to traffic-related pollution, for use in circumstances where direct measurements of pollutant levels are not feasible or are not required.     

Ecotoxicological effects of an aged TiO2 nanocomposite measured as apoptosis in the anecic earthworm Lumbricus terrestris after exposure through water, food and soil

Titanium dioxide nanoparticles seem to have a low toxicity to terrestrial organisms, though few studies are published in this area. TiO(2) used in sunscreens are nanocomposites where TiO(2) has been coated with magnesium, silica or alumina, as well as amphiphilic organics like polydimethyl siloxane (PDMS), and these coatings are modified by ageing. We assessed the ecotoxicity and propensity for bioaccumulation of an aged TiO(2) nanocomposite used in sunscreen cosmetics, and its potential effect on the frequency of apoptosis in different earthworm tissues. The earthworm Lumbricus terrestris was exposed to the TiO(2) nanocomposite for 7 days in water or 2-8 weeks in soil with the nanocomposite mixed either into food or soil at concentrations ranging from 0 to 100 mg kg(-1). Apoptosis was then measured by immunohistochemistry and Ti localized by XRF microscopy. Results showed no mortality, but an enhanced apoptotic frequency which was higher in the cuticule, intestinal epithelium and chloragogenous tissue than in the longitudinal and circular musculature. TiO(2) nanoparticles did not seem to cross the intestinal epithelium/chloragogenous matrix barrier to enter the coelomic liquid, or the cuticule barrier to reach the muscular layers. No bioaccumulation of TiO(2) nanocomposites could thus be observed.     

Indoor- and outdoor-derived contaminants in urban and rural homes in Ottawa, Ontario, Canada

Indoor and outdoor air contaminants have largely been treated separately in studies of their respective effects on respiratory and nonrespiratory health. In this paper, we report the results of a comprehensive study of key contaminants in 10 urban and 10 rural homes in Ottawa, Ontario, Canada. The analyses included house dust mite and cat allergens along with the fungal inflammatory polysaccharide beta1,3-D-glucan in settled dust and fine particulate matter, coarse particulate matter, ergosterol, glucan, and endotoxin from air samples. In addition, black carbon was continuously measured for 7 days. A detailed physical assessment of the house and patterns of use were undertaken, including a careful inspection for mold and water damage, as well as measurements of air leakage. The performance of the houses and the range and distribution of the contaminants measured were largely similar to that of previous Canadian studies. For certain combinations, it is thought that the presence of both allergen and inflammatory materials increases asthma symptoms. House-by-house comparisons of airborne concentrations of inflammatory compounds measured (endotoxin, fine particulate matter, and fungal glucan) with dust mite allergens indicated that certain houses had relatively higher amounts of both kinds of materials.     

Biological activities of the essential oil from the leaves of Lantana montevidensis (Spreng) Briq. in mice

Environment, Development and Sustainability - This work aimed to analyze the chemical composition and evaluate the anti-inflammatory and antinociceptive properties of the essential oil obtained...     

The Cost of Stack Gas Cleaning in New York State

A cost estimating methodology has been applied to an emission point inventory to estimate the capital and operating costs of stack gas cleaning in the manufacturing sector of New York State. The study represents the first major attempt to estimate control costs on a source by source basis for a large region. The various control cost components are presented for each of the twenty manufacturing industry groups and the usefulness of the estimates for an abatement planning model is outlined.

In recent years a number of heroic efforts have been made to estimate the cost of air pollution abatement on a national or regional basis. Unfortunately, these studies have relied almost entirely upon emission factors, cost engineering functions, pilot plant operations, and average or ideal firms, because of the paucity of primary data.^1-6

In the estimates of capital and operating costs presented below, an attempt has been made to improve on previous research by making extensive use of primary data. The data were taken from an emission inventory of over 20,000 sources of air contamination in New York State. A cost estimating methodology was applied to engineering parameters of existing control operations on a source by source basis. The results have been aggregated to the two-digit SIC level.     

Kinetics of steel slag leaching: Batch tests and modeling

Reusing steel slag as an aggregate for road construction requires to characterize the leaching kinetics and metal releases. In this study, basic oxygen furnace (BOF) steel slag were subjected to batch leaching tests at liquid to solid ratios (L/S) of 10 and 100 over 30 days; the leachate chemistry being regularly sampled in time. A geochemical model of the steel slag is developed and validated from experimental data, particularly the evolution with leaching of mineralogical composition of the slag and trace element speciation. Kinetics is necessary for modeling the primary phase leaching, whereas a simple thermodynamic equilibrium approach can be used for secondary phase precipitation. The proposed model simulates the kinetically-controlled dissolution (hydrolysis) of primary phases, the precipitation of secondary phases (C-S-H, hydroxide and spinel), the pH and redox conditions, and the progressive release of major elements as well as the metals Cr and V. Modeling indicates that the dilution effect of the L/S ratio is often coupled to solubility-controlled processes, which are sensitive to both the pH and the redox potential. A sensitivity analysis of kinetic uncertainties on the modeling of element releases is performed.     

The effect of vegetation on pesticide dissipation from ponded treatment wetlands: quantification using a simple model

Field data shows that plants accelerate pesticide dissipation from aquatic systems by increasing sedimentation, biofilm contact and photolysis. In this study, a graphical model was constructed and calibrated with site-specific and supplementary data to describe the loss of two pesticides, endosulfan and fluometuron, from a vegetated and a non-vegetated pond. In the model, the major processes responsible for endosulfan dissipation were alkaline hydrolysis and sedimentation, with the former process being reduced by vegetation and the latter enhanced. Fluometuron dissipation resulted primarily from biofilm reaction and photolysis, both of which were increased by vegetation. Here, greater photolysis under vegetation arose from faster sedimentation and increased light penetration, despite shading. Management options for employing constructed wetlands to polish pesticide-contaminated agricultural runoff are discussed. The lack of easily fulfilled sub-models and data describing the effect of aquatic vegetation on water chemistry and sedimentation is also highlighted.     

Assessing alternatives for mitigating net greenhouse gas emissions and increasing yields from rice production in China over the next twenty years

Assessments of the efficacy of mitigation of greenhouse gas (GHG) emissions from paddy rice systems have typically been analyzed based on field studies. Extrapolation of the mitigation potential of alternative management practices from field studies to a national scale may be enhanced by spatially explicit process models, like the DeNitrification and DeComposition (DNDC) model. Our objective was to analyze the impacts of mitigation alternatives, management of water, fertilizer, and rice straw, on net GHG emissions (carbon dioxide, methane, and nitrous oxide fluxes), yields, and water use. After constructing a GIS database of soil, climate, rice cropping area and systems, and management practices, we ran DNDC with 21-yr alternative management schemes for each of the approximately 2500 counties in China. Results indicate that, despite large-scale adoption of midseason drainage, there is still large potential for additional methane reductions from Chinese rice paddies of 20 to 60% over 2000-2020. However, changes in management for reducing CH4 emissions simultaneously affect soil carbon dynamics as well as N2O emissions and can thereby reorder the ranking of technical mitigation effectiveness. The order of net GHG emissions reduction effectiveness found here is upland rice > shallow flooding > ammonium sulfate > midseason drainage > off-season straw > slow-release fertilizer > continuous flooding. Most of the management alternatives produced yields comparable to the baseline; however, continuous flooding and upland rice significantly reduced yields. Water management strategies appear to be the most technically promising GHG mitigation alternatives, with shallow flooding providing additional benefits of both water conservation and increased yields.