Trace metal speciation during dry and wet weather flows in the Tama River, Japan, by using diffusive gradients in thin films (DGT)

The labile species of Ni, Cu, Zn, Cd, and Pb in the Tama River, an urban river in Tokyo, Japan, were measured using diffusive gradients in thin films (DGT) method under dry and wet weather conditions, and the results were compared with total dissolved concentrations in hourly samples collected in parallel. A total of 10 DGT deployments were made and 251 hourly samples were collected during 2 rounds of sampling, conducted between August and October, 2006. Two types of diffusive gradients in thin films (DGT) devices-DGT-RG for labile inorganic and DGT-APA for total (inorganic and organic) labile species-were applied throughout the samplings. The proportions of metals measured by DGT, compared with the dissolved metal concentrations (filtered using a membrane of 0.5 microm pore size), were 38 +/- 5% (RG) and 45 +/- 8% (APA) for Ni and 45 +/- 22% (RG) and 53 +/- 23% (APA) for Zn. No labile Cu was detected throughout the sampling; Cu was assumed to be in stable complexed forms. Labile Pb was detected in 3 out of 10 deployments only; the rest were lower than the detection limit. Dissolved and labile Cd concentrations were below the detection limits. Three rain events encountered during the sampling periods were evaluated. Rains brought considerably higher loads of metals in dissolved form, and DGT measurements indicated that labile metal loads also increased. Selected DGT measurements were compared with the WHAM 6 speciation model and found to be similar to the model-computed results.     

Spawning migration and returning behavior of white-streaked grouper Epinephelus ongus determined by acoustic telemetry

White-streaked grouper (Epinephelus ongus) is an important fishery target that forms fish spawning aggregations (FSAs) at specific spawning grounds. The aims of the present study were to investigate migration behavior and returning behavior in terms of FSA using acoustic telemetry. Among the 30 specimens tracked, three types of movement pattern were observed: type 1, high site fidelity at the release area before the spawning period, migration to the spawning ground during the spawning period and return to the release area just after the spawning period (17 specimens); type 2, high site fidelity at the release area, disappearance from the area during the spawning period but was not detected at the spawning ground and return to the release area (8 specimens); and type 3, high site fidelity at the release area was observed before, during and after the spawning period (5 specimens). For the 17 specimens that were categorized into type 1, the dates of departure from their release area and the dates of return to the release area of males were, respectively, significantly earlier and later than those of females. The duration between the departure date and the return date (“duration away”) of males was significantly longer than that of females. The duration away tended to be positively related to the condition factor. All 25 specimens that were categorized as type 1 and type 2 showed returning behaviors to the release area.     

CENTRIFUGE MODELING OF ONE-DIMENSIONAL SUBSURFACE CONTAMINATION1

ABSTRACT: One-dimensional contaminant transport through a saturated soil is modeled using a 1.2-m radius geotechnical centrifuge. Small-scale physical modeling in the centrifuge is achieved in relatively short time, at stress distributions that are similar to those experienced in the prototype (actual site). A 0.05 mol/l of sodium chloride solution is used as a contaminant and conductivity cells measure the concentration of the contaminant throughout the porous medium. Scaling analysis for centrifuge modeling and 1-g modeling are briefly discussed and it is concluded that centrifuge modeling simulates the effect of molecular diffusion; however, scaling of the effect of mechanical dispersion may be violated in the centrifuge if the interstitial fluid velocity is high. Centrifuge test results show good agreement with the predicted relationship between the coefficient of hydrodynamic dispersion and the Peclet number using column tests. Centrifuge modeling can be used as a complement of numerical modeling although the effect of mechanical dispersion may be overestimated in the former.     

Recycling process for yttria-stabilized tetragonal zirconia ceramics using a hydrothermal treatment

The recycling process for 3 mol% yttria-stabilized tetragonal zirconia polycrystals (3Y-TZP) sintered at 1450°–1550°C was examined by applying low-temperature degradation of zirconia ceramics under hydrothermal conditions. Hydrothermal treatment at a temperature from 200° to 240°C can lead to the spontaneous disintegration of 3Y-TZP sintered bodies into powdery particles. The hydrothermally obtained zirconia powder was found to consist of primary particles and aggregated particles. Detailed X-ray diffraction measurement revealed the formation of a cubic zirconia phase in the 3Y-TZP sintered bodies, which seemed to inhibit the disintegration of aggregated particles toward the primary particle level. The reclaimed 3Y-TZP powder was sintered again through a conventional powder processing route. The mechanical properties and microstructure of recycled 3Y-TZP sintered specimens were examined by comparison with those of the original 3Y-TZP sintered bodies. Dense recycled 3Y-TZP sintered at a higher temperature exhibited higher fracture toughness to some degree than the original 3Y-TZP.     

Controlled release of molasses melanoidin-like product from hybrid organic–inorganic silica xerogels and its application to the phytoextraction of lead through the Indian mustard

Environmental Science and Pollution Research - In this study, we investigate the release of melanoidin-like product (MLP) from hybrid silica xerogels to control the quantity of MLP in the medium...     

Thermodynamic estimation of minor element distribution between immiscible liquids in Fe-Cu-based metal phase generated in melting treatment of municipal solid wastes

Waste electrical and electronic equipment (WEEE) has become an important target in managing material cycles from the viewpoint of not only waste management and control of environmental pollution but also resource conservation. This study investigated the distribution tendency of trace elements in municipal solid waste (MSW) or incinerator ash, including valuable non-ferrous metals (Ni, Co, Cr, Mn, Mo, Ti, V, W, Zr), precious group metals (PGMs) originated from WEEE (Ag, Au, Pd, Pt), and others (Al, B, Pb, Si), between Fe-rich and Cu-rich metal phases by means of simple thermodynamic calculations. Most of the typical alloying elements for steel (Co, Cr, Mo, Nb, Ni, Si, Ti, V, and W) and Rh were preferentially distributed into the Fe-rich phase. PGMs, such as Au, Ag, and Pd, were enriched in the Cu-rich phase, whereas Pt was almost equally distributed into both phases. Since the primary metallurgical processing of Cu is followed by an electrolysis for refining, and since PGMs in crude copper have been industrially recovered from the resulting anode slime, our results indicated that Ag, Au, and Pd could be effectively recovered from MSW if the Cu-rich phase could be selectively collected.