Improving the quality of waste-derived char by removing ash

This study characterized and removed ash from waste-derived char to improve the quality of char as fuel. Municipal solid waste (MSW) and automobile shredder residue (ASR) were carbonized at 450 degrees C and at 500 degrees C, respectively, in a rotary kiln with a nitrogen atmosphere for 1h. MSW and ASR char were subjected to sieving and pulverization-sieving to screen incombustibles and the ash-rich fraction, after which float-sink separation, froth floatation, and oil agglomeration were applied to remove ash from the char. The established target quality was (1) less than 30% ash content and (2) more than 20,000 kJ/kg heating value. However, the rate of combustibles recovery had to be lowered to produce a good quality of char along with a high heating value. MSW char attained the targeted quality level using froth floatation or oil agglomeration, whereas, neither separation method was able to make ASR-derived char satisfy the target. Based on the assumption that particle properties of char are determined by the weight ratio of combustibles and ash, the densities of combustibles and ash in char were estimated using the results of float-sink separation, X-ray diffraction (XRD) analysis, and elemental content. To verify the above assumption, an energy dispersive X-ray/scanning electron microscope (EDX/SEM) analyzer was used to observe char particles.     

Characterization of an adsorbed humin-like substance on an allophanic soil formed via catalytic polycondensation between catechol and glycine, and its adsorption capability to pentachlorophenol

An allophanic soil (AS) catalyzed the formation of dark-colored polymers via polycondensation reactions between catechol and glycine. The organic carbon content of the AS was increased from 0.16% to 1.3%, indicating that some of the dark-colored polymers had been adsorbed to the AS. The characteristics of the dark-colored polymers adsorbed on the AS were similar to those of a humin that is not extractable with an aqueous alkaline solution. Such a humin-like substance (HuLS) was separated from the AS by treatment with a mixture of HF and HCl. The HuLS and humic acid-like substance (HaLS), comprising the acid-insoluble fraction in the reaction mixture, were characterized by elemental analysis, size exclusion chromatography, pyrolysis-GC/MS and ¹³C NMR. However, the structural features of HaLS and HuLS had many points in common. These results suggest that HuLS-AS can be regarded as an organo-clay complex formed by the strong adsorption of HaLS to the AS. The adsorption of pentachlorophenol (PCP) to AS and HuLS-AS was examined at pH 5.5. At this pH, the zeta potential of the HuLS-AS showed a negative value. It would, therefore, be expected that pentachlorophenolate anions would adsorb with difficulty to HuLS-AS because of electrostatic repulsion. Nevertheless, the adsorption coefficient for PCP to HuLS-AS, as estimated by the Freundlich isotherm, was seven times larger than that for AS. These results show that HuLS, when adsorbed on the AS surface, has the capability to enhance the adsorption of PCP.     

Chemical absorption process for degradation of VOC gas using heterogeneous gas-liquid photocatalytic oxidation: toluene degradation by photo-Fenton reaction

A novel process for degradation of toluene in the gas-phase using heterogeneous gas-liquid photocatalytic oxidation has been developed. The degradation of toluene gas by photo-Fenton reaction in the liquid-phase has experimentally examined. The photo-Fenton reaction in the liquid-phase could improve the overall toluene absorption rate by increasing the driving force for mass transfer and as a result enhance the removal of toluene in the exhaust gas. The toluene concentrations in the inlet gas were varied in the range from 0.0968 to 8.69gm(-3) with initial hydrogen peroxide concentration of 400mgl(-1) and Fe dose of 5.0mgl(-1). It was found that toluene in the inlet gas was almost completely dissolved into water and degraded in the liquid-phase for the inlet toluene gas concentration of less than 0.42gm(-3). The dynamic process of toluene gas degradation by the photo-Fenton reaction providing information for reaction kinetics and mass transfer rate was examined. Toluene removal kinetic analysis indicated that photo-Fenton degradation was significantly affected by H(2)O(2) concentration. The experimental results were satisfactorily described by the predictions simulated using the simplified tanks-in-series model combined with toluene removal kinetic analysis. The present results showed that the proposed chemical absorption process using the photo-Fenton heterogeneous gas-liquid photocatalytic oxidation is very effective for degradation of volatile organic gases.     

Tar and soot generation behaviors from ABS,PC and PE pyrolysis

In this study we performed a non-isothermal thermogravimetric analysis on three thermoplastics—ABS, PC and PE. The Coats and Redfern method (Nature 201:68–69, 1964) was then used to approximate the kinetic parameters of each material. In addition, we performed a series of pyrolysis experiments in a batch reactor, for each plastic. The experiments were performed over the temperature range of 600–1000 °C at a constant residence time. The liquid and solid products of the pyrolysis, were collected, separated and weighted. Those products were categorized as soot, tar and char (PC only), and their relative weight to initial sample weight (DAF) was plotted against the temperature. The tar measured was exclusively medium to high molecular weight (>80 g/mol). Results revealed that relative tar and soot production, for all three materials, first increases and then decreases with temperature increase. The maximum achieved tar yields for ABS, PC and PE were at 700, 650 and 800 °C, respectively; and the maximum soot yields were at 1000, 1000, 950 °C, respectively.     

Eco-friendly recovery process of lithium from reduction roasting residue powder based on hydrothermal extraction

Journal of Material Cycles and Waste Management - To cater to the increasing demand for secondary lithium-ion batteries, the recovery of valuable metal species in spent batteries is increasingly...