Experimental investigation of tribological characteristics and emissions with nonedible sunflower oil as a biolubricant

Plant (vegetable) oil has been evaluated as a substitute for mineral oil–based lubricants because of its natural and environmentally friendly characteristics. Availability of vegetable oil makes it a renewable source of bio-oils. Additionally, vegetable oil–based lubricants have shown potential for reducing hydrocarbon and carbon dioxide (CO₂) emissions when utilized in internal combustion (IC) engines and industrial operations. In this study, sunflower oil was investigated to study its lubricant characteristics under different loads using the four-ball tribometer and the exhaust emissions were tested using a four-stroke, single-cylinder diesel engine. All experimental works conformed to American Society for Testing and Materials standard (ASTM D4172-B). Under low loads, sunflower oil showed adequate tribological characteristics (antifriction and antiwear) compared with petroleum oil samples. The results also demonstrated that the sunflower oil–based lubricant was more effective in reducing the emission levels of carbon monoxide (CO), CO₂, and hydrocarbons under different test conditions. Therefore, sunflower oil has the potential to be used as lubricant of mating components.

Implications: An experimental investigation of the characteristics of nonedible sunflower oil tribological behaviors and potential as a renewable source for biofluids alternative to the petroleum oils was carried out. The level of emissions of a four–stroke, single-cylinder diesel engine using sunflower oil as a biolubricant was evaluated.     

Improving the diagnosis of bovine tuberculosis using gold nanoparticles conjugated with purified protein derivative: special regard to staphylococcal protein A and streptococcal protein G

Environmental Science and Pollution Research - Different ancillary immunodiagnostic tests were traditionally-established for diagnosis of bovine tuberculosis (BTB) either cellular or humoral as...     

Ignition characteristics, conditions of criticality and disappearance of criticality of cumene hydroperoxide reaction by modeling approach

The thermal explosion problem of cumene hydroperoxide exothermic reaction which is used in chemical industries for production of some chemical materials is investigated. The analytical solutions of the problem to determine the margin between ignition and non-ignition systems are presented. The solution offers different analytical expressions which relate between the critical parameters for both steady and unsteady-states in different planes of solutions for different cases. The numerical solutions in different planes offer different trajectories of solution as sub-critical (non-ignition) and supercritical (ignition). Also from the numerical solution the relations between the critical parameters are presented. The critical behaviors from both analytical and numerical solutions are concise and pertained the same results.     

Assessment of heavy metals contamination in soils surrounding a gold mine: comparison of two digestion methods

This study investigated two digestion methods (USEPA 3051: microwave, HNO₃ or Hossner: hot plate, HF–H₂SO₄–HClO₄) for heavy metals analysis in contaminated soil surrounding Mahad AD'Dahab mine, Saudi Arabia. Moreover, contamination metal levels were estimated. The Hossner and USEPA 3051 methods showed, respectively, average total contents of 17.2 and 18.1 mg kg^?1 for Cd, 11.6 and 10.6 mg kg^?1 for Co, 45.7 and 34.7 mg kg^?1 for Cr, 1030 and 1100 mg kg^?1 for Cu, 33,300 and 27,400 mg kg^?1 for Fe, 963 and 872 mg kg^?1 for Mn, 33.2 and 22.8 mg kg^?1 for Ni, 791 and 782 mg kg^?1for Pb, and 6320 and 2870 mg kg^?1 for Zn. A lack of significant differences and a high correlation coefficient (>90%) for Cd, Pb and Cu between the two digestion methods suggest that the total-recoverable method (USEPA 3051) may be equivalent to the total-total digestion method (Hossner) for determining these metals in the studied soil. However, significantly higher concentrations of Cr, Fe, Ni and Zn were found by the Hossner method comapred with the USEPA 3051 method. The soil samples have very or extremely high levels of Zn, Cu, Cd and Pb contamination, indicating very high potential ecological risk.     

Concentration of some polycyclic aromatic hydrocarbons in rain,soil and ground water around Ismailia,Egypt

Residues of acenaphthylene, fluorene, anthracene, pyrene, chrysene, benzo(b)fluoranthene and benzo(k)fluoranthene were monitored in rain, soil and groundwater around Ismailia, in northeast Egypt. Residues detected in rain water in 1995 and 1996 were mainly of relatively low molecular weight. Both acenaphthylene and fluorene were detected in rain for the two consecutive years. Top soil has shown a wider spectrum and higher concentrations of (PAHs) than those detected in deep soil, rain and ground water. Only three compounds, acenaphthylene, fluorene and anthracene were detected in samples collected at 50 cm depth. While no traces of PAHs were detected at 1 m depth detectable concentrations of fluorene and anthracene were monitored in groundwater.     

Cytotoxic effects of seven Tunisian hospital wastewaters on the proliferation of human breast cancer cell line MDA-231: correlation with their chemical characterization

Environmental Science and Pollution Research - Hospital wastewaters contain large amounts of pharmaceutical residues, which may eventually be discharged into the aquatic environment through...     

The Middle Eastern small towns

In recent years there has been a large increase in the number of small towns with populations between 5,000 and 10,000 in the Middle East. They represent an immense variety of urban types fulfilling a great range of functions. This paper looks at the characteristics of these settlements and argues that they have been largely neglected in the study of Middle East urbanisation and calls for comprehensive national urban planning orientated towards the needs of small towns.     

Lead Speciation in the Sediments of the Heavily Polluted Western Harbor of Alexandria

The Western Harbor (WH) became under stress in the past decades, following successive increase in population. This study deals with local distribution of total lead and its species in the WH sediments. The lead content was high and there was a relationship between its enrichment and oil dispersed from ships. The lowest total lead value was found in the harbor middle far from direct effects of pollution. A five-step sequential extraction scheme was applied to illustrate the contribution shared by each individual fraction in the total lead concentration in the WH sediments. The exchangeable fraction (F1) was very low. The bound to carbonate fraction (F2), the bound to iron-manganese oxide fraction (F3) and the bound to organic matter—sulfide fraction (F4) ranked fourth, second and third in abundance. Oxygen was the main factor controlling the value of F2. F3 gave a direct relationship with total lead. The high levels of F4 occurred at locations of low salinity and enriched with organic matter. The residual fraction (F5) dominated other lead species, reflecting the sediment composition and the amounts of discharged pollutants.     

Life cycle assessment of a large water treatment plant in Turkey

Environmental Science and Pollution Research - The objective of this study is to assess the environmental sustainability of a large water treatment plant through life cycle assessment (LCA)...     

Investigating feasible sites for multi-purpose small dams in Swat District of Khyber Pakhtunkhwa Province,Pakistan: socioeconomic and environmental considerations

Environment, Development and Sustainability - The low water storage capacity caused water crisis in Pakistan; therefore, the country needs both small- and large-scale reservoirs to store surplus...