Effect of Building Orientations on Gaseous Dispersion in Street Canyon: a Numerical Study

This paper studies the effects of building orientations on the gaseous pollutant dispersion released from vehicles exhaust in street canyons through computational fluid dynamics (CFD) numerical simulations using three k–ε turbulence models. Four building orientations of the street canyon were examined in the atmospheric boundary layer. The numerical results were validated against wind-tunnel results to optimize the turbulence models. The numerical results agreed well with the wind-tunnel results. The simulation demonstrated that the minimum concentration at the human respiration height in the street canyon was on the windward side for the building orientations θ?=?112.5°, 135°, and 157.5°. The pollutant concentration level decreases as the building orientation increases from θ?=?90°. The concentration in the cavity region for the building orientation θ?=?90° was higher than for the wind directions θ?=?112.5°, 135°, and 157.5°. The wind velocity and turbulence energy increase as the building orientation increases. The finding from this work can be used to help urban designers and policy-makers in several aspects.     

Study on gas diffusion emitted from different height of point source

The flow and dispersion of stack-gas emitted from different elevated point source around flow obstacles in an urban environment have been investigated, using computational fluid dynamics models (CFD). The results were compared with the experimental results obtained from the diffusion wind tunnel under different conditions of thermal stability (stable, neutral or unstable). The flow and dispersion fields in the boundary layer in an urban environment were examined with different flow obstacles. Gaseous pollutant was discharged in the simulated boundary layer over the flat area. The CFD models used for the simulation were based on the steady-state Reynolds-Average Navier-Stoke equations (RANS) with kappa-epsilon turbulence models; standard kappa-epsilon and RNG kappa-epsilon models. The flow and dispersion data measured in the wind tunnel experiments were compared with the results of the CFD models in order to evaluate the prediction accuracy of the pollutant dispersion. The results of the CFD models showed good agreement with the results of the wind tunnel experiments. The results indicate that the turbulent velocity is reduced by the obstacles models. The maximum dispersion appears around the wake region of the obstacles.     

Seasonal variation of oxidative stress biomarkers in clams Ruditapes decussatus sampled from Tunisian coastal areas

Seven (7) sites from to the Tunisian coastal area were monitored through four seasons using several oxidative stress biomarkers including lipid peroxidation. Catalase (CAT) specific activity was determined in clam Ruditapes decussatus digestive gland. Lipid peroxidation was assessed in the same tissues using malondialdehyde (MDA) concentration, neutral lipid (NL) and lipofuscin accumulation. Results show that catalase specific activity varies between sites and fluctuates in time. The highest CAT activities were recorded in sites from Bizerta Lagoon and sites neighbouring Sfax city. Malondialdehyde accumulation in digestive gland cells seems to be very pronounced in animals sampled in summer and autumn. Digestive gland sections of clams sampled from reported heavy metal polluted sites exhibited higher volume density of residual bodies. Our results showed that the neutral lipids and lipofuscin content in clam's digestive gland are more sensitive to general stress as compared to other biomarkers, and could be used successfully in clams as early warning tools in field biomonitoring programs.     

Heavy metal and polycyclic aromatic hydrocarbons in Ebrié lagoon sediments, Côte d’Ivoire

Surface sediments throughout Ebrié lagoon, Côte d’Ivoire were collected in 2001 and analyzed for their heavy metal and polycyclic aromatic hydrocarbons (PAH) contaminant content. Geochemical maps of heavy metals (Cd, Cu, Zn, Fe, and Mn) in the surface sediment were produced based on geographical information system (GIS) technology. Heavy metals and PAH were detected at high concentration and provide evidence for several anthropogenic inputs to the lagoon. A significant spatial relationship was found for Fe, Zn, and Cu in the sediment using a GIS-based analysis, suggesting that these metal contaminants in the sediments of the Biétri bay had common sources.     

A study on Aspergillus species in houses of asthmatic patients from Sari City, Iran and a brief review of the health effects of exposure to indoor Aspergillus

To study the distribution of Aspergillus spp. in outdoor and indoor air of asthmatic patients’ houses, as well as a review on the health effects of exposure to indoor Aspergillus. Open plates containing malt extract agar media were used to isolate fungi from the indoor (n?=?360) and outdoor (n?=?180) air of 90 asthmatic patients’ houses living in Sari City, Iran. Plates were incubated at room temperature for 7–14 days. Cultured Aspergillus spp. were identified by standard mycological techniques. All culture plates grew fungi, a testament to the ubiquitous nature of fungal exposure. Cladosporium spp. (29.2%), Aspergillus spp. (19.0%), and Penicillium spp. (18.3%) were most common inside the houses while Cladosporium spp. (44.5%), Aspergillus spp. (12.4%), and Alternaria spp. (11.1%) were most common outside the houses. Aspergillus flavus (30.1%) and A. fumigatus (23.1%) are the most commonly isolated species in indoor air. Aspergillus flavus (44.5%) and A. fumigatus (42.6%) were the most prevalent Aspergillus spp. outside. The most colony numbers of Aspergillus were isolated from kitchens (30.4%) and the least from bedrooms (21.1%). Aspergillus flavus was the most prevalent specie in all sampled rooms except in the kitchen where A. fumigatus was the most common. Aspergillus flavus is the most prevalent species among the Aspergillus spp. in the indoor and outdoor of a warm climate area. In these areas, A. flavus can be a major source of allergen in the air. Therefore, minimizing indoor fungal exposure could play an important role in reducing allergic symptoms in susceptible persons.     

Eco-friendly synthesis of silver nanoparticles using green algae (<Emphasis Type="Italic">Caulerpa serrulata</Emphasis>): reaction optimization,catalytic and antibacterial activities

Stable colloidal silver nanoparticles (AgNPs) were synthesized using Caulerpa serrulata (green marine algae) aqueous extract as an efficient reducing and stabilizing agent. This method is considered to be a sustainable alternate to the more complicated chemical procedures. To achieve the optimization synthesis of AgNPs, several effects such as extract concentration, contact time, pH values, and temperature were examined. The synthesized AgNPs were characterized by UV–Vis spectroscopy, FT-IR, XRD, and HR-TEM. The synthesized AgNPs showed an intense surface plasmon resonance band at 412 nm at the optimal conditions (20% (v/v) extract and 95 °C). TEM reveal that higher extract concentration and higher temperature leading to the formation of spherical AgNPs with an average particle size of 10 ± 2 nm. The synthesized AgNPs showed excellent catalytic reduction activity of Congo red (CR) dye from aqueous solutions. The degradation percentage of CR with AgNPs accelerated by increasing either NaBH₄ concentration or catalytic dosage. The AgNPs synthesized at higher temperature (e.g., 10Ag-95) exhibited the highest catalytic activity. The reaction kinetics was found to be pseudo first order with respect to the dye concentration. Moreover, the AgNPs displayed antibacterial activity at lower concentration against Staphylococcus aureus, Pseudomonas aeruginosa, Shigella sp., Salmonella typhi, and Escherichia coli and may be a good alternative therapeutic approach. The outcomes of the current study confirmed that the synthesized AgNPs had an awesome guarantee for application in catalysis and wastewater treatment.     

Geochemical and solute transport modelling for CO2 storage, what to expect from it?

Geochemistry plays an important role when assessing the impact of CO₂ storage. Due to the potential corrosive character of CO₂, it might affect the chemical and physical properties of the wells, the reservoir and its surroundings and increase the environmental and financial risk of CO₂ storage projects in deep geological structures. An overview of geochemical and solute transport modelling for CO₂ storage purposes is given, its data requirements and gaps are highlighted, and its progress over the last 10 years is discussed. Four different application domains are identified: long-term integrity modelling, injectivity modelling, well integrity modelling and experimental modelling and their current state of the art is discussed. One of the major gaps remaining is the lack of basic thermodynamical and kinetic data at relevant temperature and pressure conditions for each of these four application domains. Real challenges are the coupled solute transport and geomechanical modelling, the modelling of impurities in the CO₂ stream and pore-scale modelling applications.     

Electrogenerative gold recovery from cyanide solutions using a flow-through cell with activated reticulated vitreous carbon

An electrogenerative flow-through reactor with an activated reticulated vitreous carbon cathode was developed. The influence of palladium-tin activation of the cathode towards gold deposition was studied by cyclic voltammetry. The reactor proved to be efficient in recovering more than 99% of gold within 4 h of operation. The performance of the reactor was evaluated with initial gold concentrations of 10, 100 and 500 mg L-1 and various electrolyte flow rates. Gold recovery was found to be strongly dependent on electrolyte flow rate and initial gold concentration in the cyanide solution under the experimental conditions used.     

Contaminant transport in groundwater in the presence of colloids and bacteria: Model development and verification

Colloids and bacteria (microorganisms) naturally exist in groundwater aquifers and can significantly impact contaminant migration rates. A conceptual model is first developed to account for the different physiochemical and biological processes, reaction kinetics, and different transport mechanisms of the combined system (contaminant–colloids–bacteria). All three constituents are assumed to be reactive with the reactions taking place between each constituent and the porous medium and also among the different constituents. A general linear kinetic reaction model is assumed for all reactive processes considered. The mathematical model is represented by fourteen coupled partial differential equations describing mass balance and reaction processes. Two of these equations describe colloid movement and reactions with the porous medium, four equations describe bacterial movement and reactions with colloids and the porous medium, and the remaining eight equations describe contaminant movement and its reactions with bacteria, colloids, and the porous medium. The mass balance equations are numerically solved for two-dimensional groundwater systems using a third-order, total variance-diminishing scheme (TVD) for the advection terms. Due to the complex coupling of the equations, they are solved iteratively each time step until a convergence criterion is met. The model is tested against experimental data and the results are favorable.     

Inquiries into Malaysia's socio-technical disasters: recommendations and lessons learnt

Most democratic countries hold inquiries into disasters. One of their key functions is to establish the cause of an event and to learn lessons in order to prevent a recurrence. In addition, they offer an opportunity for communal catharsis, permitting the public to vent anger, distress and frustration and to exert pressure for policy changes. Malaysia has experienced six landmark socio-technical disasters since 1968, which resulted in the proposal or amendment of various safety/emergency acts and regulations. The authors used a grounded theory approach utilising a constant comparative method to analyse the recommendations made by the inquiries into these events. Data indicate that social and technical recommendations comprise 85 and 15 per cent, respectively, of the total recommendations made by the inquiry committees. This paper offers suggestions for improving the management of inquiry tribunals, as they will remain a valuable source of information for society and corporations to learn from past incidents.