Role of loosely bound humic substances and humin in the bioavailability of phenanthrene aged in soil

A study was conducted to determine a possible role of loosely bound humic substances (i.e., humic and fulvic acids) in bioavailability of aged phenanthrene with time. In this study, long-term residence of phenanthrene in soil is defined as aging or sequestration, and the effect was determined by the declined bioavailability to bacteria of the polycyclic aromatic hydrocarbon with increased residence time. After 1, 7, and 100 days of aging of phenanthrene in Lima loam, about 90-93% of initial phenanthrene was recovered from the humin-mineral fraction of Lima loam whereas less than 12% was found in humic and fulvic acids of the same soil. Mineralization rates of phenanthrene aged in the humin-mineral fraction significantly decreased with time by the test bacterium P5-2. In terms of extents of mineralization, the difference with time was not appreciable, but still significant at P<0.05. Additional decreases in the rates and extents of mineralization were observed with the whole soil (i.e. Lima loam) to which phenanthrene had been aged. Data suggest that major sequestration sites for phenanthrene may reside in the humin-mineral fraction, and probably humic and fulvic acids may act as a physico-chemical barrier to bacterial degradation so that the compound's bioavailability may be limited.     

Identification of Tsuga Germplasm by Morphological Characters and RAPD Markers

Germplasm collection is important to preserve and maximize genetic diversity for germplasm conservation. Tsuga dumosa （ D. Don） Eichler in Engler ＆ Prantl. and T. chinensis var. forrestii （Downie） Silba germplasm was collected from three localities in China： Mt. Yulong, Wenfeng Temple and Mt. Dishiergu, Yunnan Province. Accessions were identified based on morphological characters and RAPD markers. The shapes of the apices and margins of needles were examined, and the length and width of needles, cones and seeds from accessions of mature plants were used to compare the morphological differences and to identify the germplasm. Molecular markers generated by randomly amplified polymorphic DNA （RAPD） were also used to characterize the taxa. Although the clustering based on RAPD markers was inconsistent with the morphological characters of the needles, based on the overall morphological characters and on RAPD markers, the accessions from Mt. Yulong and Wenfeng Temple were identified as T. chinertsis var. forrestii, and those from Mt. Dishiergu identified as T. dumosa. Taxonomic identification of the accessions was made based on morphology and by RAPD markers concurred. The results indicate that the shapes of the apices and margins of needles particularly from young plants could not be used as a possible key to identify T. dumosa and T. chinertsis var. forrestii. Fig 6, Tab 3, Ref24     

Assessment of airborne environmental bacteria and related factors in 25 underground railway stations in Seoul,Korea

This study assessed bacterial concentrations in indoor air at 25 underground railway stations in Seoul, Korea, and investigated various related factors including the presence of platform screen doors (PSD), depth of the station, year of construction, temperature, relative humidity, and number of passengers. A total of 72 aerosol samples were collected from all the stations. Concentrations of total airborne bacteria (TAB) ranged from not detected (ND) to 4997 CFU m^?3, with an overall geometric mean (GM) of 191 CFU m^?3. Airborne bacteria were detected at 23 stations (92%) and Gram-negative bacteria (GNB) were detected at two stations (8%). TAB concentrations of four stations (16%) exceeded 800 CFU m^?3, the Korea indoor bio-aerosol guideline. The results of the study showed that TAB concentrations at the stations without PSD showed higher TAB concentrations than those with PSD, though not at statistically significant levels. TAB concentrations of deeper stations revealed significantly higher levels than those of shallower stations. Based on this study, it is recommended that mitigation measures be applied to improve the indoor air quality (IAQ) of underground railway stations in Seoul, with focused attention on deeper stations.     

Mercury and selenium levels in lemon sharks (Negaprion brevirostris) in relation to a harmful red tide event

Tissue levels of mercury (Hg; total, organic) and selenium (Se) were assessed in juvenile lemon sharks (Negaprion brevirostris) from Florida nearshore waters collected during a harmful algal bloom (HAB, brevetoxin) event and compared with sharks not exposed to HABs. In all sharks studied, total Hg levels in the muscle were generally present in a molar excess over Se (which may protect against Hg toxicity) and mean muscle Hg levels (0.34  $\upmu $ g/g) exceed safe human consumption guidelines. While there was generally no difference in tissue Hg and Se levels following exposure of sharks to HABs, hepatic Hg levels were significantly lower (56% reduction) in the HAB-exposed sharks compared to controls. As Hg and HABs are globally increasing in scope and magnitude, further work is warranted to assess their interactions and biotic impacts within aquatic ecosystems, especially for a species such as the lemon shark that is classified as a near-threatened species by the International Union for the Conservation of Nature.     

Characterization of compaction and CBR properties of recycled concrete aggregates for unbound road base and subbase materials in Vietnam

Journal of Material Cycles and Waste Management - Mechanical properties of recycled concrete aggregates (RCA) such as compaction and California bearing ratio (CBR) are important for application as...     

Development of a SWAT Patch for Better Estimation of Sediment Yield in Steep Sloping Watersheds1

Abstract: The watershed scale Soil and Water Assessment Tool (SWAT) model divides watersheds into smaller subwatersheds for simulation of rainfall‐runoff and sediment loading at the field level and routing through stream networks. Typically, the SWAT model first needs to be calibrated and validated for accurate estimation through adjustment of sensitive input parameters (i.e., Curve Number values, USLE P, slope and slope‐length, and so on). However, in some instances, SWAT‐simulated results are greatly affected by the watershed delineation and Digital Elevation Models (DEM) cell size. In this study, the SWAT ArcView GIS Patch II was developed for steep sloping watersheds, and its performance was evaluated for various threshold values and DEM cell size scenarios when delineating subwatersheds using the SWAT model. The SWAT ArcView GIS Patch II was developed using the ArcView GIS Avenue program and Spatial Analyst libraries. The SWAT ArcView GIS Patch II improves upon the SWAT ArcView GIS Patch I because it reflects the topographic factor in calculating the field slope‐length of Hydrologic Response Units in the SWAT model. The simulated sediment value for 321 subwatersheds (watershed delineation threshold value of 25 ha) is greater than that for 43 subwatersheds (watershed delineation threshold value of 200 ha) by 201% without applying the SWAT ArcView GIS Patch II. However, when the SWAT ArcView GIS Patch II was applied, the difference in simulated sediment yield decreases for the same scenario (i.e., difference in simulated sediment with 321 subwatersheds and 43 subwatersheds) was 12%. The simulated sediment value for DEM cell size of 50 m is greater than that for DEM cell size of 10 m by 19.8% without the SWAT ArcView GIS Patch II. However, the difference becomes smaller (3.4% difference) between 50 and 10 m with the SWAT ArcView GIS Patch II for the DEM scenarios. As shown in this study, the SWAT ArcView GIS Patch II can reduce differences in simulated sediment values for various watershed delineation and DEM cell size scenarios. Without the SWAT ArcView GIS Patch II, variations in the SWAT‐simulated results using various watershed delineation and DEM cell size scenarios could be greater than those from input parameter calibration. Thus, the results obtained in this study show that the SWAT ArcView GIS Patch II should be used when simulating hydrology and sediment yield for steep sloping watersheds (especially if average slope of the subwatershed is >25%) for more accurate simulation of hydrology and sediment using the SWAT model. The SWAT ArcView GIS Patch II is available at http://www.EnvSys.co.kr/~swat for free download.     

Characterization of controlled-release KMnO4 (CRP) barrier system for groundwater remediation: a pilot-scale flow-tank study

Release and spreading of permanganate (MnO(4)(-)) in the well-based controlled-release potassium permanganate (KMnO(4)) barrier system (CRP system) was investigated by conducting column release tests, model simulations, soil oxidant demand (SOD) analyses, and pilot-scale flow-tank experiments. A large flow tank (L x W x D=8m x 4m x 3m) was constructed. Pilot-scale CRP pellets (OD x L=0.05 m x1.5m; n=110) were manufactured by mixing approximately 198 kg of KMnO(4) powders with paraffin wax and silica sands in cylindrical moulds. The CRP system (L x W x D=3m x 4m x 1.5m) comprising 110 delivery wells in three discrete barriers was constructed in the flow tank. Natural sands (organic carbon content=0.18%; SOD=3.7-11 g MnO(4)(-)kg(-1)) were used as porous media. Column release tests and model simulations indicated that the CRP system could continuously release MnO(4)(-) over several years, with slowly decreasing release rates of 2.5 kg d(-1) (day one), 109 g d(-1) (day 100), 58 g d(-1) (year one), 22 g d(-1) (year five), and 12 g d(-1) (year 10). Mean MnO(4)(-) concentrations within the CRP system ranged from 0.5 to 6 mg l(-1) during the 42 days of testing period. The continuously releasing MnO(4)(-) was gradually removed by SOD limiting the length of MnO(4)(-) zone in the porous media. These data suggested that the CRP system could create persistent and confined oxidation zone in the subsurface. Through development of advanced tools for describing agent transport and facilitating lateral agent spreading, the CRP system could provide new approach for long-term in situ treatment of contaminant plumes in groundwater.     

Whole Effluent Toxicity (WET) Tests on Wastewater Treatment Plants with Daphnia magna and Selenastrum capricornutum

Whole effluent toxicity (WET) tests, with Daphnia magna and Selenastrum capricornutum, were introduced to evaluate the biological toxicities of effluents from the wastewater treatment plants (WWTPs) in Korea. In WET tests of WWTPs effluents, 33.3% (33/99) for D. magna and 92.6% (75/81) for S. capricornutum revealed greater than 1 toxic unit (TU), even though all the treatment plants investigated were operating in compliance with the regulations, as assessed using conventional monitoring methods (i.e., BOD and total concentration of N or P, etc). There were only minor differences in toxicities according to the types of influents (municipal and agro-industrial) in all treatment plants. However, the effluents treated by an activated sludge treatment process were found to exhibit significantly lower toxicity than those treated by rotating biological contactor (RBC) and extended aeration processes. The seasonal variations in the toxicity were lower in the summer compared to winter, which may have been due to the rainfall received to the sewage intake system during the former period. The impact of WET on river water was also investigated based on the discharge volume. At sites A and B, the total impact of toxicity to stream and river waters was observed to be 70.9% and 90.4% for D. magna and S. capricornutum, respectively. The other four small treatment plants (sites F, G, H and I), with relative discharging volumes between 0.001 and 0.002, contribute less than 1% to the total toxicity.     

Enhancement of aerobic biodegradation in an oxygen-limiting environment using a saponin-based microbubble suspension

This study investigated the ability of a saponin-based microbubble suspension to enhance aerobic biodegradation of phenanthrene by subsurface delivery. As the microbubble suspension flowed through a sand column pressure buildup and release was repeatedly observed, which delivered oxygen to the less permeable regions. Burkholderia cepacia RPH1, a phenanthrene-degrading bacterium, was mainly transported in a suspended form in the microbubble suspension. When three pore volumes of the microbubble suspension containing B. cepacia RPH1 was introduced into a column contaminated with phenanthrene (100 mg/kg), the oxygen content declined to 5% from an initial value of 20% within 5 days and correspondingly, 34.4% of initial phenanthrene was removed in 8 days. The addition of two further three pore volumes enhanced the biodegradation efficiency by a factor of 2.2. Our data suggest that a saponin-based microbubble suspension could be a potential carrier for enhancing the aerobic biodegradation under an oxygen-limiting environment.     

Effects of copper (I) oxide on growth and biochemical compositions of two marine microalgae

In copper based antifouling (AF) paints Cu (I) oxide was largely used as booster biocide. In this study effect of Cu (I) oxide on two marine microalgae, Tetraselmis suecica and Dunaliella tertiolecta was demonstrated. EC50 (96 hr) concentrations estimated for T. suecica and D. tertiolecta were 1.3 mg l(-1) and 1.34 mg l(-1), respectively. Copper (I) oxide induced changes in growth, chlorophyll, carbohydrate and protein contents were observed in T. suecica and D. tertiolecta. At low concentration of 0.0625 mg l(-1), 3-26% and 1-16% growth stimulation was observed in T. suecica and T. tertiolecta respectively. Increasing Cu (I) oxide concentrations proportionately decreased the carbohydrate and protein contents. This study clearly indicates the toxicity of excessive Cu (I) oxide on growth and biochemical compositions of T. suecica and D. tertiolecta.