An overview on corporate response towards sustainability issues in textile industry

Textiles constitute an important part of human beings everyday life. Environmentalists have been calling forth industries to incorporate sustainability principles into their production processes. In comparison with other industries, textile industry is considered to be major contributor towards environmental pollution and is subject to creating various ecological (water body pollution, waste generation, air pollution) issues throughout supply chain from fibre production till fabric finishing. This paper reviews the existing literature related to various sustainability issues surrounding the textile industry across the globe. The authors classify the literature to discuss the drivers, barriers, and responses of firms in the textile industry in favour of sustainability. Despite a growing body of research in this area, we identify significant gaps in the literature with special reference to managerial approaches being used for incorporating sustainability. While it is very important to understand the motivations that drive firms towards sustainability and barriers to implementation, attention is also drawn towards research aspects pertaining to managerial perception towards new technologies and processes. The article also provides future research opportunities in form of specific questions to strengthen existing literature in this field.     

Water quality assessment of Majhiaon block of Garwa district in Jharkhand with special focus on fluoride analysis

Fluoride in groundwater is known to contaminate the water sources globally. Jharkhand, one of the states in the eastern part of India, is known to have excessive fluoride content in groundwater sources. The present work involves assessment of water quality with special reference to fluoride in Majhiaon block of Garwa district in Jharkhand. Iron, nitrate and arsenic were also tested for the water samples collected from site. Eight hundred forty samples were tested for fluoride on site using colourimetry method, and one tenth of the samples were brought to laboratory for iron, nitrate, arsenic and fluoride analysis. Results show that 402 samples were having fluoride above permissible limit. Iron and nitrate were found to be beyond permissible limits in 302 and 286 water samples, respectively. More than 50% of samples collected from school had fluoride levels above permissible limits. Arsenic was well within the limits. However, few samples shown were excessive of iron and nitrate.     

Studies on urban drinking water quality in a tropical zone

Anthropogenic activities associated with industrialization, agriculture and urbanization have led to the deterioration in water quality due to various contaminants. To assess the status of urban drinking water quality, samples were collected from the piped supplies as well as groundwater sources from different localities of residential, commercial and industrial areas of Lucknow City in a tropical zone of India during pre-monsoon for estimation of coliform and faecal coliform bacteria, organochlorine pesticides (OCPs) and heavy metals. Bacterial contamination was found to be more in the samples from commercial areas than residential and industrial areas. OCPs like α,γ-hexachlorocyclohexane and 1,1 p,p-DDE {dichloro-2, 2-bis(p-chlorophenyl) ethene)} were found to be present in most of the samples from study area. The total organochlorine pesticide levels were found to be within the European Union limit (0.5 μg/L) in most of the samples. Most of the heavy metals estimated in the samples were also found to be within the permissible limits as prescribed by World Health Organization for drinking water. Thus, these observations show that contamination of drinking water in urban areas may be mainly due to municipal, industrial and agricultural activities along with improper disposal of solid waste. This is an alarm to safety of public health and aquatic environment in tropics.     

Assessing the potentials of Lemna minor in the treatment of domestic wastewater at pilot scale

Water crisis is one of the most serious problems faced by the world today. Phytoremediation is one of the serious efforts towards sustainability. Macrophyte-based wastewater treatment systems have several potential advantages compared with conventional treatment systems. Duckweeds (Lemna spp., Spirodela spp., Wolffia spp.) are small, green freshwater, free-floating aquatic plants. The primary objective of this work was to analyze the role of duckweeds in organic waste and nutrient removal from domestic wastewater being generated from hostels of Birla Institute of Technology, Mesra, Ranchi (India). Interesting results were obtained in which the BOD value reduced by 94.45% and the level of orthophosphate at the end of the work was found to be reduced by 79.39%. The duckweeds flourished well during the experimental period in the pH range of 7 to 8; it can be said that, other factors remaining favorable, the optimum pH for duckweed growth ranges from 7 to 8. Therefore, it can be concluded that this treatment can be successfully carried out on a large scale. Also, it is a low-cost solution to wastewater treatment problems and could satisfy the discharge standards.     

Dynamics of traffic noise in a tropical city Varanasi and its abatement through vegetation

Noise level monitoring and its reduction with different width and height of vegetation belt were studied in the Varanasi city. Noise level monitoring of the Varanasi city revealed the fact that area category A (without vegetation) was highly polluted as compare to area category B (with vegetation) having less fluctuation of traffic load. Four plant species Putranjeva roxburghi, Cestrum nocturnum, Hibiscus rosasinensis and Murraya peniculata were tested for noise reduction study at different frequencies. Experiment revealed the fact that H. rosasinensis reduced noise highest at both low and high frequencies (100-500 Hz, 22 dB and 2.5-6.3 KHz 26 dB), followed by M. peniculata (100-500 Hz, 18 dB and 2.5-6.3 KHz 20 dB), P. roxburghi (100-500 Hz 15 dB and 2.5-6.3 KHz 17 dB) and C. nocturnum (100-500 Hz 9 dB and 2.5-6.3 KHz 14 dB). Significance of vegetation belt in noise reduction was established with multiple regression models.     

Thermal Degradation and Kinetics of Alginate Polyurethane Hybrid Material Prepared from Alginic Acid as a Polyol

Alginate polyurethane hybrid materials are prepared by varying mole ratio of 2, 4-TDI as a di-isocyanate and alginic acid as a polyol in presence of dimethyl sulfoxide (DMSO) as a solvent. FT-IR and ¹³C one-dimensional (1D) solid state NMR (SSNMR) spectroscopy indicates that alginic acid is converted into alginate-polyurethane hybrid material via urethane linkage. Surface morphology of alginate-polyurethane hybrids changes by varying alginic acid: TDI ratio. The peak at near 221 °C in DSC thermogram of alginic acid (Alg) is shifted to higher temperature in alginate-polyurethane hybrid (Algpu1 and Algpu2). TGA study shows that alginate-polyurethane hybrid prepared using alginic acid: TDI = 1:1 (Algpu2) is more stable than alginic acid: TDI = 1:0.5 (Algpu1) at 300 °C. Kinetic analysis was performed to fit with TGA data, where the entire degradation process has been considered as three consecutive 1st order reactions. This study shows that thermal stability of alginate-polyurethane hybrid material was increased by adjusting mole ratio of 2, 4-TDI and alginic acid.     

Preparation of Alginic Acid and Metal Alginate from Algae and their Comparative Study

Alginic acid and metal alginates are prepared from fresh algae using extraction method. A FTIR spectrum indicates that alginic acid is converted into the metal alginate. Comparing calcium and cobalt alginates, asymmetric stretching of free carboxyl group of calcium alginate at 1630 cm⁻¹ is shifted to 1585 cm⁻¹ in cobalt alginate, due to the change of charge density, radius and atomic weight of the cation, creating a new environment around the carbonyl group. The strong exothermic peak of alginic acid in DSC thermogram indicates the decomposition of biopolymer, whereas strong exothermic peak of metal alginate in DSC thermogram attributed to the decomposition of biopolymer and formation of respective carbonate. Based on DSC study, the decomposition of cobalt alginate occurs at higher temperature comparing to those of sodium and calcium alginate, which may conclude into the higher stability of cobalt alginate. TGA results reveal that, cobalt alginate is more stable than calcium and sodium alginate at 300 °C temperature. Surface morphology (at same magnification), as well as porosity (%) and pore size distribution results change with metals present in different metal alginates.     

Heavy Metal Accumulation in Lichens from the Hetauda Industrial Area Narayani Zone Makwanpur District, Nepal

Lichen samples collected in and around Hetauda Industrial area,(HIA) Narayani zone, Makwanpur district, Nepal, were analyzedfor Cr, Ni, Pb, Zn, Ca, Mn, Fe, Si, and Al. The samples fromthe location inside the industrial area have higher levels ofmetal than the outside areas. Pyxine meissnerina growinginside the industrial area accumulated higher levels of all themetals analyzed.     

Genetic diversity in some perennial plant species with-in short distances

Distinct morphophysiological variations observed for over 2 years with-in short distances among four perennial plants indicated genetic diversity among the lines growing at three places. The isozyme and SDS polyacrylamide gel banding patterns as genetic markers were used to investigate four perennial species, namely Dalbergia sissoo Roxb., Delonix regia (Boj.) Refin., Cassia fistula L. and Calotropis procera R. Br. Plant materials collected from three locations (Agra, Gwalior and Lucknow) differing in climo-edaphic variables were examined for 4 enzyme systems, viz., esterase, polyphenol oxidase, peroxidase and superoxide dismutase (EST, PPO, PRX and SOD). Among the four isozymes SOD and PRX revealed best discriminating power. Protein banding patterns as well as zymogram revealed that Dalbergia sissoo growing at Gwalior was closer to that of Agra; Delonix regia depicted highest similarity between Lucknow and Agra and Calotropis procera of Lucknow location was more closer to Gwalior than Agra. The results confirm genetic diversity in the species as a means of adaptation to differing climo-edaphic variables.     

Autoheated thermophilic aerobic sludge digestion and metal bioleaching in a two-stage reactor system

A two-stage process has been developed for stabilization of sludge and removal of heavy metals from the secondary activated sludge with high rate of energy and time conservation.The first stage of the process involves autoheated thermophilic aerobic digestion at 55-60°C inoculated with less-acidophilic thermophilic sulfur-oxidizing microorganisms(ATAD).The results show that it is possible to maintain the autoheated conditions(55-60°C) in the ATAD reactor up to 24 hr,leading to reduction of 21% total solids(TS),27% volatile solids(VS),27% suspended solids(SS) and 33% volatile suspended solids(VSS) from the sludge.The sludge pH also decreased from 7 to 4.6 due to the activity of less-acidophilic thermophilic microorganisms.In the second stage operation,the digested sludge(pH 4.6,TS 31.6 g/L) from stage one was subjected to bioleaching in a continuous stirred tank reactor,operated at mean hydraulic retention times(HRTs) of 12,24 and 36 hr at 30°C.An HRT of 24 hr was found to be sufficient for removal of 70% Cu,70% Mn,75% Ni,and 80% Zn from the sludge.In all,39% VSS,76% Cu,78.2% Mn,79.5% Ni and 84.2% Zn were removed from the sludge in both the stages.