Despite the widespread and successful use of luminescence-based bioassays in water testing, their applications to soils and sediments is less proven. In part this is because such bioassays have mainly been carried out in an aqueous-based medium and, as such, favour contaminants that are readily water-soluble. In this study, aqueous solutions and soils contaminated with heavy metals (HM), polar organic contaminants and hydrophobic organic contaminants (HOCs) were tested using a range of luminescence-based bioassays (Vibrio fischeri, Escherichia coli HB101 pUCD607 and Pseudomonas fluorescens 10586r pUCD607). For the first two chemical groups, the assays were highly reproducible when optimised extraction procedures were employed but for HOCs the bioassay response was poor. Quantitative structure-activity relationships (QSARs) obtained from aqueous solutions had a linear response although correlation for the chemicals tested using bacterial bioassays was significantly less sensitive than that of sublethal tests for Tetrahymena pyriformis. Bacterial and Dendrobaena veneta bioassay responses to extracts from HM amended soils showed that a clear relationship between trophic levels could be obtained. There is no doubt that the wide range of bioluminescent-based bioassays offers complementary applications to traditional testing techniques but there is a significant need to justify and optimise the extraction protocol prior to application. 相似文献
The influence of moulting and ovarian maturation on cadmium accumulation in the tissues of female shore crabs Carcinus maenas exposed to 1 mg Cd l−1 in the water was investigated. Cadmium accumulation in all tissues examined was markedly increased in crabs in the postmoult
stages (A and B) compared to crabs in all other moult stages. During the moult cycle, average cadmium accumulation in the
midgut gland ranged from 29 μg Cd g−1 dw at premoult stage (D2) to 589 μg Cd g−1 dw at postmoult stage (A). Average cadmium concentrations in the haemolymph ranged from 0.56 μg Cd ml−1 at intermoult stage (C4) to 4.6 μg Cd ml−1 at postmoult stage (A), while the gills accumulated from 103 μg Cd g−1 dw in intermoult stage (C3) to 352 μg Cd g−1 dw in postmoult stage (A). Cadmium concentration in gills and haemolymph was also significantly higher in crabs in late premoult
stage (D3) compared to C4-crabs, while midgut gland cadmium concentration remained elevated in C1- and C3- intermoult stages relative to C4. During ovarian maturation the cadmium accumulation in midgut gland, gills, ovaries and haemolymph decreased. Average cadmium
concentration in the midgut gland decreased from 63 μg g−1 dw in ovarian Stage I to 19 μg g−1 dw in ovarian Stage VI. The same pattern was observed for gills, haemolymph and ovaries. The present study demonstrates that
cadmium accumulation in the female shore crab strongly depends on the physiological status of the animal. A possible association
between physiological calcium requirements and cadmium accumulation during moulting is discussed.
Received: 20 January 2000 / Accepted: 20 July 2000 相似文献
Mining operations result in a wide range of environmental impacts: acid mine drainage (AMD) and acid sulfate soils being among the most common. Due to their acidic pH and high soluble metal concentrations, both AMD and acid sulfate soils can severely damage the local ecosystems. Proper post‐mining management practices are necessary to control AMD‐related environmental issues. Current AMD‐impacted soil treatment technologies are rather expensive and typically not environmentally sustainable. We conducted a 60‐day bench‐scale study to evaluate the potential of a cost‐effective and environment‐friendly technology in treating AMD‐impacted soils. The metal binding and acid‐neutralizing capacity of an industrial by‐product, drinking water treatment residuals (WTRs) were used for AMD remediation. Two types of locally generated WTRs, an aluminum‐based WTR (Al‐WTR) and a lime‐based WTR (Ca‐WTR) were used. Highly acidic AMD‐impacted soil containing very high concentrations of metals and metalloids, such as iron, nickel, and arsenic, was collected from the Tab‐Simco coal mine in Carbondale, Illinois. Soil amendment using a 1:1 Al‐ and Ca‐WTR mix, applied at 5 and 10 percent rates significantly lowered the soluble and exchangeable fractions of metals in the AMD‐impacted soil, thus lowering potential metal toxicity. Soil pH increased from an extremely acidic 2.69 to a near‐neutral 6.86 standard units over the 60‐day study period. Results from this preliminary study suggest the possibility of a successful scale‐up of this innovative, cost‐effective, and environmentally sustainable technology for remediating AMD‐impacted acid sulfate soils. 相似文献
Increasing amount of dyes in an ecosystem has propelled the search of various methods for dye removal. Amongst all the methods, adsorption occupies a prominent place in dye removal. Keeping this in mind, many adsorbents used for the removal of hazardous anionic azo dye Congo red (CR) from aqueous medium were reviewed by the authors. The main objectives behind this review article are to assemble the information on scattered adsorbents and enlighten the wide range of potentially effective adsorbents for CR removal. Thus, CR sorption by various adsorbents such as activated carbon, non-conventional low-cost materials, nanomaterials, composites and nanocomposites are surveyed and critically reviewed as well as their sorption capacities are also compared. This review also explores the grey areas of the adsorption performance of various adsorbents with reference to the effects of pH, contact time, initial dye concentration and adsorbent dosage. The equilibrium adsorption isotherm, kinetic and thermodynamic data of different adsorbents used for CR removal were also analysed. It is evident from a literature survey of more than 290 published papers that nanoparticle and nanocomposite adsorbents have demonstrated outstanding adsorption capabilities for CR.
The Andaman Islands characterize one of the relatively unexplored coral reef zones of the Indian subcontinent. A few benthic biodiversity studies have been carried out to date, but several coral and algal species still remain to be evaluated in terms of their abundance, vigour and conservation priority. In absence of a comprehensive, reliable dataset, inter-relationships between anthropogenic impacts and climate alterations with the coral reefs cannot be assessed authentically. This paper addresses the coupled themes of biodiversity and reef management in the Andaman Islands by examining the percentage cover of corals and benthic algae from shallow-water ecosystems across the coasts of Havelock, Neil, Ross, Jolly Buoy Islands and Chidiyatapu beach proximal to Port Blair. Four major reef types were observed: coral-dominated, algae-dominated, neutral setting and algae overgrowing dead reefs. Jolly Buoy Island had the highest percentage cover of scleractinian corals and crustose coralline algae. Turf algae were most abundant at the Ross Island, while other macroalgae showed highest abundance at Chidiyatapu. Overall species diversity values for corals and algae were highest at the Jolly Buoy and Chidiyatapu, respectively. Given that corals and algae are critical reef components, management paradigms must consider the abundance and frequency of both these biogenic entities in the seascape. The needs, expectations and objectives of the people dependent on coral reef ecosystems also need to be considered. Long-term monitoring is imperative in understanding the natural typology of reefs and managing the possible algal encroachments. Refined management efforts that include greater thrust on development of marine protected areas and reserves; establishment of connectivity between various coral ecosystems of the region; control of invasive algae; and increasing awareness among the local people as well as tourists will ensure continued support of ecosystem to maintain healthy reefs. Collectively, the results are used to promote some strategies to conserve the Andaman coral reefs and cope with the detrimental anthropogenic and climate changes in these coastal habitats. 相似文献
Journal of Material Cycles and Waste Management - Waste lubricating oil is considered to be a hazardous waste and has tremendous impact on human health and environment. The present review... 相似文献
In this study, the relationship between inhalable particulate (PM10), fine particulate (PM2.5), coarse particles (PM2.5 – 10) and meteorological parameters such as temperature, relative humidity, solar radiation, wind speed were statistically analyzed and modelled for urban area of Kolkata during winter months of 2003–2004. Ambient air quality was monitored with a sampling frequency of twenty-four hours at three monitoring sites located near traffic intersections and in an industrial area. The monitoring sites were located 3–5 m above ground near highly trafficked and congested areas. The 24 h average PM10 and PM2.5 samples were collected using Thermo-Andersen high volume samplers and exposed filter papers were extracted and analysed for benzene soluble organic fraction. The ratios between PM2.5 and PM10 were found to be in the range of 0.6 to 0.92 and the highest ratio was found in the most polluted urban site. Statistical analysis has shown a strong positive correlation between PM10 and PM2.5 and inverse correlation was observed between particulate matter (PM10 and PM2.5) and wind speed. Statistical analysis of air quality data shows that PM10 and PM2.5 are showing poor correlation with temperature, relative humidity and solar radiation. Regression equations for PM10 and PM2.5 and meteorological parameters were developed. The organic fraction of particulate matter soluble in benzene is an indication of poly aromatic hydrocarbon (PAH) concentration present in particulate matter. The relationship between the benzene soluble organic fraction (BSOF) of inhalable particulate (PM10) and fine particulate (PM2.5) were analysed for urban area of Kolkata. Significant positive correlation was observed between benzene soluble organic fraction of PM10 (BSM10) and benzene soluble organic fraction of PM2.5 (BSM2.5). Regression equations for BSM10 and BSM2.5 were developed. 相似文献
Water quality indice are necessary for resolving lengthy, multi-parameter, water analysis reports into single digit scores. This, in turn, is essential for comparing the water quality of different sources and in monitoring the changes in the water quality of a given source as a function of time and other influencing factors.In this paper we present the computer-automated tool QUALIDEX (water QUALIty inDEX), which has been developed by us to generate and operate water quality indice. Several popular indice – such as the Oregon Water Quality Index developed in the 1970s by Oregon Department of Environmental Quality and later updated in 1995, the Aquatic Toxicity Index developed by Wepener and coworkers for protection of aquatic life at the Olifants river, Kruger National Park, South Africa, the water quality index developed by Dinius in 1987, the Overall Index of Pollution (of surface waters) developed at the National Environmental Engineering Research Institute (NEERI), and the water quality index of the Central Pollution Control Board (CPCB) – have also been added to QUALIDEX in modular form. There is also a Newwater quality index sub-module which enables the user to generate his or her own index and compare its performance with these well-known indice. The package is also capable of analyzing the variations in the water quality of different sites at different times. The software has been coded in Visual C++ and has been integrated with MS Access database. 相似文献