Removal of organic polyelectrolytes and their metal complexes by adsorption onto xonotlite

Natural organic polyelectrolytes (humic and fulvic acids) and their metal complexes were removed by adsorption onto xonotlite. The removal percentages of humic and fulvic acids by xonotlite were approximately 80% and 30%, respectively. Humic acid removal from solution by adsorption onto xonotlite took place more readily than fulvic acid removal. The molecular weight distributions of the humic substances remaining in solution after adsorption with the xonotlite were measured with size exclusion chromatography. A comparison of molecular weight distributions demonstrated conclusively that large molecular weight components were adsorbed preferentially, indicating that adsorption efficiency depends on the number of functional groups of humic substances. Furthermore, the surface topography of the adsorbent was observed before and after adsorption by scanning electron microscopy. The calculated heat of adsorption was of 330 kJ mol(-1) which was evaluated from the Clapeyron-Clausius equation. Therefore, the adsorption type can be considered chemical. Since xonotlite can be easily synthesized and obtained at low cost, the adsorption method of humic and fulvic acids is superior to their precipitation.     

Association of the mutagenicity of airborne particles with the direct emission from combustion processes investigated in Osaka, Japan

The association of the direct-acting mutagenicity of soluble organic fraction of airborne particles toward Salmonella typhimurium YG1024 strain with the direct emission was investigated at a roadside and at a residential area in Osaka, Japan. The direct-acting mutagenicity was evaluated as mutagenic activity per unit volume of ambient air (rev m⁻³) and/or that per airborne particulate weight collected on a filter (rev mg⁻¹). The annual or diurnal changes of the mutagenicity of airborne particles at the residential site showed similar patterns to those of some gaseous pollutants such as NO₂ and SO₂, which were emitted from combustion processes. This result indicates that the mutagenicity is mainly attributable to the primary emissions. From the analysis of the relationship between the wind sector and the mutagenic intensity, rev m⁻³ and rev mg⁻¹ values were strongly affected by the emissions from the fixed sources and from the mobile sources, respectively. The rev m⁻³ value and concentration of 1-nitropyrene (1-NP) in unit per m³ at the roadside were a factor of 2.6 and 2.8 higher than those at the residential site, respectively, but the rev mg⁻¹ value and concentration of 1-NP in unit per mg at the roadside were substantially comparable to those at the residential area. These observations suggest that the characteristics of the airborne particles can be attributed to the automotive emissions even at the suburban area.     

Analyses on phenological and morphological variations of mangrove forests along the southwest coast of Bangladesh

Drastic changes in river discharge and salinity levels are threatening the phenology and morphology of the coastal mangrove forests of the Sundarbans of Bangladesh. We have used AVHRR GIMMS (1985–2006) and MODIS (2005–2010) satellite Normalized Difference Vegetation Index (NDVI) data to identify the temporal variation of the phenology of the mangroves. Linear interpolation and Fourier-based adjustment were applied to remove noise from the NDVI time series. Then linear regression analysis on a single area (8 km ? 8 km) and a composite of 36 areas for three NDVI statistics the annual minimum, annual average, and annual maximum were performed--over the time periods 1985–1990, 1990–2000, 2000–2006 and 2005–2010 to identify possible functional changes in NDVI time series around the Sundarbans. Furthermore, we used fourteen LANDSAT images spanning the period 1989–2010 to estimate the spatiotemporal rate of shoreline changes over the three time periods 1989–2000, 2000–2006, and 2006–2010. A decreasing trend in the annual minimum NDVI was observed in most of the areas of the Sundarbans for the period 1990–2000. During the years 2000–2006, the trends of the three NDVI statistics became significantly positive, indicating an improvement of the mangrove phenology. In the period 2005–2010, a decreasing trend in all the NDVI variables was again dominant. The coast underwent rapid erosion from 1989–2000 and 2006–2010. However, the rate substantially declined between 2000 and 2006, when accretion was dominant. The advent of the upstream Farakka barrage caused a significant reduction in the Ganges-Gorai River discharge and increased the salinity in and around the Sundarbans. Our study concludes that this may be responsible for the degradation of mangrove phenology and accelerated erosion in the earlier and recent periods. In the interim, 2000–2006, improved river discharge and salinity levels due to the Ganges water sharing agreement (1996) and dredging of the Gorai River bed (1998–1999) enhanced the mangrove phenology and helped the coast to gain land.     

Water purification with sintered porous materials fabricated at 400℃ from sea bottom sediments

A sintering technology for preparing porous materials from sea bottom sediments was developed for use in water purification. The purpose of the present study was to develop methods for converting the sea bottom sediments dredged from Ago Bay into value-added recycled products. The sintered products fabricated at 400℃ were found to be very effective adsorbents for the removal of heavy metals.     

Japan’s experience of energy saving and business model for low-carbon economy

The purpose of this paper is to clarify the questions concerning stimulation of the innovation and the diffusion of energy saving or low-carbon.To do so,this paper explains using two cases of Japan-energy saving innovation after the Oil Shock and the eco points system.For the case after the oil shock,we explain the energy saving trend after the Oil Shock and the factors statistically.Then we put forward the business model for the low-carbon economy.Furthermore,we analyze the case of the eco points system from 2009-2011 in Japan and explain the significance of the business model for diffusion of the low-carbon products.     

Removal of thiobencarb in aqueous solution by zero valent iron

A cost-effective method with zero valent iron (ZVI) powder was developed for the purification of thiobencarb (TB)-contaminated water. The removal treatment was performed in the batch system. A sample solution of 10 ml containing 10 microg ml(-1) of TB could be almost completely treated by 100mg of ZVI at 25 degrees C for 12h of treatment time. Since the formation of chloride ion in the aqueous solution during the treatment of TB was observed, the removal of TB with ZVI may contain two processes: reduction (degradation) and adsorption. Because the present treatment for TB is simple, easy handling and cheap, the developed technology with ZVI can contribute to the treatment of agricultural wastewaters.     

Separation and characterization of the colored material from sugarcane molasses

The colored material (X) was effectively separated from sugarcane molasses using reversed-phase chromatography. Characterization of the molecular structure of sample X was performed using infrared absorption (IR) spectrometry, mass spectrometry (MS), and dynamic light scattering (DLS). The IR spectrum was similar to that of commercial humic acid, and the MS analysis showed that the sample possessed relatively small heterogeneous molecules with molecular masses around 234, 446, 657, 868, and 1079 Da. On the other hand, X sample showed an inhibitory activity toward the cysteine proteinase papain. Furthermore, the inhibitory (G-1) and weak inhibitory (G-2) fractions were separated from sample X using gel permeation chromatography. Samples G-1 and G-2 inhibited papain partial-noncompetitively and had the inhibition constants of 5.01 x 10(-5) and 1.08 x 10(-3)M, respectively. Interestingly, in the DLS experiment, the Stokes radius of sample G-1 was approximately 2 nm, about twice one of sample G-2.     

Effect of manufacturing methods of AgCl/Al2O3 catalyst on selective catalytic reduction of NOx

The AgCl/Al2O3 catalyst has potential for use in the selective catalytic reduction (SCR) of NOx. A compound hydrocarbon, following oxygenation is used as a type of reducing agent. In this experiment, the AgCl/Al2O3 catalyst was produced by four different methods, and the differences among their reduction catalysis of NOx were compared. Ethanol was used as a type of reducing agent. X-ray diffraction analysis was performed to study the crystalline structure and scanning electron microscope and transmission electron microscope (TEM) were applied to determine the microindentation. The results indicated that, in the range of 350–400°C, there was no significant difference on the NOx reduction rate; however, there was dispersion at high and low temperature ranges. The size of the AgCl particles was about 20–100 nm.     

Modeling Free-Surface Fluctuation Effects for Calculation of Turbulent Open-Channel Flows

A new method of introducing the free-surface effects in the calculation of turbulent open-channel flows using the amplitude of the free-surface fluctuation is proposed along with a modeling method of the equation for the free-surface fluctuation. It can be incorporated in two-equation models like k-or k-type models by introducing the damping factor to represent the interaction of the eddies with the fluctuating free-surface. Test calculations for fully developed flows and those over backward-facing step indicate good agreement with direct numerical simulation results as well as experimental results.     

Non-sterile simultaneous saccharification and fermentation of corn leaves and stalks to <Emphasis Type="SmallCaps">l</Emphasis>-lactic acid without external nutrient addition

Fermentation of lignocellulosic biomass requires auxiliary materials, including nutrients, to ensure the proliferation of microorganisms. Nutrients are usually inexpensive, but their contribution to the cost is considerable because of the very low prices of fermentation products, such as bio-ethanol. Using substances present in native lignocellulosic biomass as nutrients for fermentation was proposed and demonstrated. Leaves and stalks of corn plants were used as biomass, and nutrients were recovered as a nutrient solution by soaking them in water before alkaline peroxide pretreatment. Pretreated biomass and the nutrient solution derived from the same lot were used for non-sterile simultaneous enzymatic saccharification and thermophilic l-lactic acid fermentation (SSF). Using the nutrient solution in the saccharification step did not impact sugar recovery, and instead improved sugar yields because of the presence of eluted sugars in the solution. The l-lactic acid yield of 0.33 g g^?1 based on native biomass weight indicated that the nutrient solution functioned as a source of nutrients and sugars, especially as a source of essential phosphorus. Comparatively, autoclaved SSF yielded less or no l-lactic acid, indicating an apparent inhibitive effect derived from the nutrient solution on bacterial growth.