Solute transport in crystalline rocks at Äspö — I: Geological basis and model calibration

Water-conducting faults and fractures were studied in the granite-hosted Äspö Hard Rock Laboratory (SE Sweden). On a scale of decametres and larger, steeply dipping faults dominate and contain a variety of different fault rocks (mylonites, cataclasites, fault gouges). On a smaller scale, somewhat less regular fracture patterns were found. Conceptual models of the fault and fracture geometries and of the properties of rock types adjacent to fractures were derived and used as input for the modelling of in situ dipole tracer tests that were conducted in the framework of the Tracer Retention Understanding Experiment (TRUE-1) on a scale of metres. After the identification of all relevant transport and retardation processes, blind predictions of the breakthroughs of conservative to moderately sorbing tracers were calculated and then compared with the experimental data. This paper provides the geological basis and model calibration, while the predictive and inverse modelling work is the topic of the companion paper [J. Contam. Hydrol. 61 (2003) 175].The TRUE-1 experimental volume is highly fractured and contains the same types of fault rocks and alterations as on the decametric scale. The experimental flow field was modelled on the basis of a 2D-streamtube formalism with an underlying homogeneous and isotropic transmissivity field. Tracer transport was modelled using the dual porosity medium approach, which is linked to the flow model by the flow porosity. Given the substantial pumping rates in the extraction borehole, the transport domain has a maximum width of a few centimetres only. It is concluded that both the uncertainty with regard to the length of individual fractures and the detailed geometry of the network along the flowpath between injection and extraction boreholes are not critical because flow is largely one-dimensional, whether through a single fracture or a network. Process identification and model calibration were based on a single uranine breakthrough (test PDT3), which clearly showed that matrix diffusion had to be included in the model even over the short experimental time scales, evidenced by a characteristic shape of the trailing edge of the breakthrough curve. Using the geological information and therefore considering limited matrix diffusion into a thin fault gouge horizon resulted in a good fit to the experiment. On the other hand, fresh granite was found not to interact noticeably with the tracers over the time scales of the experiments.While fracture-filling gouge materials are very efficient in retarding tracers over short periods of time (hours–days), their volume is very small and, with time progressing, retardation will be dominated by altered wall rock and, finally, by fresh granite. In such rocks, both porosity (and therefore the effective diffusion coefficient) and sorption K_ds are more than one order of magnitude smaller compared to fault gouge, thus indicating that long-term retardation is expected to occur but to be less pronounced.     

Assessment of reference values for polychlorinated biphenyl concentration in human blood

A chemical factory which produced polychlorinated biphenyls (PCBs) operated in Brescia, North Italy, (about 200000 inhabitants) from the 1930s to the 1980s. High levels of PCBs were recently found in soil, food and people living in an area close to the factory. We performed a survey among the general population living in non-polluted areas of the town in order to define the reference values (RVs) of the non-exposed population. A random sample of subjects aged 20-79 years (50% males) was selected. Participants underwent PCB determination and were interviewed on their residential and occupational history and current diet. For RV determination, subjects who had resided in the polluted area or consumed any food produced in the area in their lifetime were excluded. Eight hundred and ninety-two subjects were contacted, 579 (65%) of whom agreed to participate; 311 of them were considered for RV determination (53% male, mean age=48.7 years). Total PCB serum levels, computed as the sum of the 24 congeners determined, were: mean=5.15ng/ml (SD=8.83), median=4.11ng/ml, range=0.4-34.12ng/ml, 95th centile=14.38ng/ml. Lipid-adjusted mean and median were 897 and 705ng/g lipid, respectively. PCB values showed positive correlations with age (Spearman's r=0.76) and with serum concentration of total cholesterol (r=0.40) and triglycerides (r=0.36). No association was found with gender, cigarette smoking, alcohol or diet. Seven PCB congeners, (PCB 180, 153, 138, 170, 194, 118, and 156), including those at higher chlorination, were present in more than 30% of the subjects and contributed 99% of the total PCB levels, with a modest role of dioxin-like congeners.     

Influence of tree species composition,thinning intensity and climate change on carbon sequestration in Mediterranean mountain forests: a case study using the CO2Fix model

Prediction of future forest carbon (C) stocks as influenced by forest management and climate is a crucial issue in the search for strategies to mitigate and adapt to global change. It is hard to quantify the long-term effect of specific forest practices on C stocks due to the high number of processes affected by forest management. This work aims to quantify how forest management impacts C stocks in Mediterranean mountain forests based on 25 combinations of site index, tree species composition and thinning intensity in three different climate scenarios using the CO2Fix v.3.2 model Masera et al. (Ecol Modell 164:177–199, 2003). The study area is an ecotonal zone located in Central Spain, and the tree species are Scots pine (Pinus sylvestris L.) and Pyrenean oak (Quercus pyrenaica Willd.). Our results show a strong effect of tree species composition and a negligible effect of thinning intensity. Mixed stands have the highest total stand C stocks: 100 % and 15 % more than pure oak and pine stands respectively, and are here suggested as a feasible and effective mitigation option. Climate change induced a net C loss compared to control scenarios, when reduction in tree growth is taken into account. Mixed stands showed the lowest reduction in forest C stocks due to climate change, indicating that mixed stands are also a valid adaptation strategy. Thus converting from pure to mixed forests would enhance C sequestration under both current and future climate conditions.     

Flow cytometric characterization of bacterial abundance and physiological status in a nitrifying-denitrifying activated sludge system treating landfill leachate

Environmental Science and Pollution Research - Flow cytometry has recently been presented as a research tool in the assessment of the viability/activity of activated sludge from municipal...     

The effect of storage and mechanical pretreatment on the biological stability of municipal solid wastes

Modern mechanical–biological waste treatment plants for the stabilization of both the source-separated organic fraction of municipal solid wastes (OFMSW) and the mixed stream of municipal solid wastes (MSW) include a mechanical pretreatment step to separate recyclable materials such as plastics, glass or metals, before biological treatment of the resulting organic material. In this work, the role of storage and mechanical pretreatment steps in the stabilization of organic matter has been studied by means of respiration techniques. Results have shown that a progressive stabilization of organic matter occurs during the pretreatment of the source-separated OFMSW, which is approximately 30% measured by the dynamic respiration index. In the case of mixed MSW, the stabilization occurring during the reception and storage of MSW is compensated by the effect of concentration of organic matter that the pretreatment step provokes on this material. Both results are crucial for the operation of the succeeding biological process. Finally, respiration indices have been shown to be suitable for the monitoring of the pretreatment steps in mechanical–biological waste treatment plants, with a strong positive correlation between the dynamic respiration index and the cumulative respiration index across all samples tested.     

Spatial distribution patterns of the gorgonians <Emphasis Type="Italic">Eunicella singularis</Emphasis>, <Emphasis Type="Italic">Paramuricea clavata</Emphasis>, and <Emphasis Type="Italic">Leptogorgia sarmentosa</Emphasis> (Cape of Creus,Northwestern Mediterranean Sea)

Most of the current knowledge on Mediterranean gorgonians is restricted to investigations of those populations found within shallow sublittoral waters, and only limited data are available for populations located below scuba depth. To overcome this lack of information, the occurrence and abundance of the gorgonians Eunicella singularis, Paramuricea clavata, and Leptogorgia sarmentosa were investigated in northwestern Mediterranean benthic communities over a wide geographical (60 km of coastline) and bathymetrical (0–70 m deep) extent using a remotely operated vehicle (ROV). The greatest occurrence and abundances of E. singularis and P. clavata were concentrated in areas that are directly exposed to strong near-bottom currents. E. singularis was the most common and abundant species and displayed great plasticity and amplitude in its environmental preferences. Conversely, P. clavata showed a very patchy distribution that was associated with vertical rocky walls. Only isolated colonies of L. sarmentosa were observed in the study area. Hot spots of abundance of E. singularis and P. clavata were identified below a depth of 40 m, which demonstrates the importance of studying the distribution of benthic species over a wide geographical and bathymetrical extent.