Anti-apoptotic role of spermine against lead and/or gamma irradiation-induced hepatotoxicity in male rats

Exposure to either lead (Pb) or γ-irradiation (IR) results in oxidative stress in biological systems. Herein, we explored the potential anti-apoptotic effect of spermine (Spm) against lead and/or γ-irradiation-induced hepatotoxicity in male albino rats. Rats were divided into eight experimental groups of ten rats each: groups including negative control, whole body γ-irradiated (6 Gray (Gy)), lead acetate (PbAct) trihydrate orally administered (75 mg/kg bw ≡ 40 mg/kg bw Pb for 14 consecutive days), and Spm intraperitoneally dosed (10 mg/kg bw for 14 consecutive days) rats and groups subjected to combinations of Pb + IR, Spm + IR, Spm + Pb, and Spm + Pb followed by IR on day 14 (Spm + Pb + IR). A significant decrease in arginase activity as well as mRNA and protein levels of Bcl-2 and p21 was observed in rats intoxicated with Pb and/or γ-irradiation compared to controls, whereas Bax mRNA and protein levels were significantly increased. Also, an increased level of nitric oxide (NO) with a reduced arginase activity was observed in liver tissues of intoxicated rats. Spm co-treatment with lead and/or γ-irradiation attenuated the increase in Bax mRNA and protein expression, while it restored those of Bcl-2 and p21 together with NO levels and arginase activity to control values. Altogether, we suggest that Spm may be useful in combating free radical-induced apoptosis in Pb-intoxicated and/or γ-irradiated rats.     

Hospital admissions in Iran for cardiovascular and respiratory diseases attributed to the Middle Eastern Dust storms

Environmental Science and Pollution Research - The main objective of this study was to assess the possible effects of airborne particulate matter less than 10 μm in diameter (PM10)...     

The Representation of Biofuels in Political Cartoons: Ironies,Contradictions and Moral Dilemmas

Biofuels are an important component in the suite of renewable energy alternatives but their development trajectory has been fraught with controversy. This study investigated the representation of biofuels in political cartoons on the Internet. Political cartoons have relied on informative, persuasive, and performative attributes to engender critical reflection and mobilize action. We analyzed a corpus of 130 relevant cartoons obtained through Google Images which were then thematically categorized. The problems highlighted in these cartoons focused on the social injustices arising from the diversion of food sources to fuel, the environmental destruction arising from deforestation, the unfulfilled expectations for climate change mitigation, and the policy contradictions that emerged. We suggest that political cartoons’ discursive dimensions allow us to make immediate connections between the image and our cultural stores of meaning, while at the same time further elucidate the dilemmas and contradictions embedded in the public's interface with biofuels as an environmental issue.     

Statistical source identification of major and trace elements in groundwater downward the tailings dam of Miduk Copper Complex, Kerman, Iran

Identifying the possible sources of potential harmful metals in groundwater systems plays a crucial role in evaluating the potential risks to residents and local plant cover. An attempt was made to define the origin of Al, Cd, Cu, Fe, Mo, Ni, and Pb in groundwater using multivariate statistic approaches [principal component analysis (PCA), hierarchical cluster analysis], and tailings sequential extraction by the method of Tessier et al. The concentrations of studied elements were measured in 42 samples collected from 15 stations surrounding and downward the tailings dam of Miduk Copper Complex, central province of Kerman, Iran. According to the PCA results, confirmed by cluster dendrogram and metal content measurement of tailings sequential extracts, two components accounting for nearly 73% of the total variance, controlled the heavy metal variability and classified the possible source of groundwater contamination into two categories: (1) upper seepage which controls the variability of Cd, Cu, Fe, Ni, and Pb and (2) toe seepage of tailings dump affecting on Mo and Al concentration in downstream groundwater.     

Quality assessment of various bottled waters marketed in Saudi Arabia

This study focuses on the chemical analysis of the available brands of domestic bottled water in Riyadh City, Saudi Arabia. The distribution of the chemical constituents (major, minor, and trace elements) is determined and compared with the chemical content labeled on the bottles and with drinking water standards of Saudi Arabian, World Health Organization, and U.S. Environmental Protection Agency. The obtained results indicated that except for fluoride and bromate, the concentrations of dissolved salts, soluble cations and anions, nitrate, and trace elements of most bottled waters on sale were within the permissible limits set by standards used. On the other hand, the comparison between determined and reported label values recorded a substantial variation in some parameter values. Results indicated that more than 18 % of the sampled bottled waters exceeded the allowable limits for drinking water. Generated Piper diagrams revealed that the majority of investigated waters were sodium chloride–sulfate type; however, the hydrochemical modeling indicated that all water samples were undersaturated for anhydrite, gypsum, and halite.     

Assessment of indoor and outdoor particulate air pollution at an urban background site in Iran

The relationship between indoor and outdoor particulate air pollution was investigated at an urban background site on the Payambar Azam Campus of Mazandaran University of Medical Sciences in Sari, Northern Iran. The concentration of particulate matter sized with a diameter less than 1 μm (PM_1.0), 2.5 μm (PM_2.5), and 10 μm (PM₁₀) was evaluated at 5 outdoor and 12 indoor locations. Indoor sites included classrooms, corridors, and office sites in four university buildings. Outdoor PM concentrations were characterized at five locations around the university campus. Indoor and outdoor PM measurements (1-min resolution) were conducted in parallel during weekday mornings and afternoons. No difference found between indoor PM₁₀ (50.1 ± 32.1 μg/m³) and outdoor PM₁₀ concentrations (46.5 ± 26.0 μg/m³), indoor PM_2.5 (22.6 ± 17.4 μg/m³) and outdoor PM_2.5 concentration (22.2 ± 15.4 μg/m³), or indoor PM_1.0 (14.5 ± 13.4 μg/m³) and outdoor mean PM_1.0 concentrations (14.2 ± 12.3 μg/m³). Despite these similar concentrations, no correlations were found between outdoor and indoor PM levels. The present findings are not only of importance for the potential health effects of particulate air pollution on people who spend their daytime over a period of several hours in closed and confined spaces located at a university campus but also can inform regulatory about the improvement of indoor air quality, especially in developing countries.     

Effect of Lignocellulosic Type on Long-Term Hygroscopic Behavior of Natural Filler/HDPE Composites

Natural filler/high density polyethylene (HDPE) injection-molded composites of flour from different lignocellulosic sources were prepared, and their long-term water absorption and thickness swelling were studied. Filler samples from wheat straw, hybrid Euro-American poplar, and loblolly pine were mixed with the matrix at 35 wt% lignocellulosics content and either zero or 2% maleic anhydride grafted polyethylene (MAPE) as compatibilizer. Results indicated water absorption of all the composites followed the kinetics of a Fickian diffusion process. The water diffusion coefficient of the composites was clearly dependent upon the lignocellulosic type. The wheat straw composites showed the highest and the pine composites exhibited the lowest water absorption coefficients. The highest thickness swelling took place in the wheat straw composites, followed by the poplar and pine composites, respectively. Adding MAPE to the composites decreased the water diffusion coefficient and thickness swelling by improving the adhesion between natural filler and the HDPE.     

Investigation of the effects of static magnetic field on apoptosis in bone marrow stem cells of rat

This research was carried out to evaluate the influence of static magnetic field on the rate of apoptosis in bone marrow stem cells (BMSCs) of rats. Extracted cells were suspended in αMEM as a culture media for 48 h. After that, cells were exposed to 15 mT static magnetic field (SMF) for 5 h, incessantly with or without FeCl₂. The rate of apoptosis was then assessed via flow cytometery. The results showed that either treatment with FeCl₂ or exposure to SMF enhanced the rate of apoptotic cells. Moreover, cells that were treated simultaneously with FeCl₂ and SMF have higher rate of apoptosis. An increase in apoptosis by 26.5% was induced by SMF alone and an increase in apoptosis by 28.2% was induced by a combination of FeCl₂ and SMF, compared to their corresponding controls. The results recommended that the effects of SMF on apoptosis may be related to increment of the number of free radicals in the cells.