Impact of petroleum industry on goats in Saudi Arabia: heavy metal accumulation,oxidative stress,and tissue injury

Environmental Science and Pollution Research - Heavy metals (HMs) constitute a group of persistent toxic pollutants, and the petroleum industry is one of the sources of these metals. This study...     

Health risk assessment of occupational exposure to styrene in Neyshabur electronic industries

Environmental Science and Pollution Research - Styrene is one of the essential components in making thousands of everyday products. Occupational exposure to styrene causes pulmonary, neurological,...     

Natural resistance of rose petals to microbial attack

Petals of red, yellow and white roses (Rosa damascene Mill.) of the family Rosaceae were extracted with (1:1) methylene chloride/methanol and tested for their antimicrobial activities against four species of Gram-positive bacteria (Bacillus cereus, Bacillus subtilis, Micrococcus luteus and Staphylococcus aureus), five species of Gram-negative bacteria (Enterobacter aerogenes, Escherichia coli, Klebsiella pneumonia, Pseudomonas aeruginosa and Serratia marcescens) and five species of fungi (Penicillium notatum, Aspergillus niger, Rhizopus stolonifer, Saccharomyces cerevisiae and Fusarium oxysporum). All of the crude extracts showed a wide range of antimicrobial activities according to the tested organism and rose's type. Micrococcus luteus was found to be the most susceptible bacteria to all crude extracts. Red and yellow petal extracts showed much higher antibacterial activity than the white petals extract. Bacillus subtilis was found to be the least susceptible to all extracts. The fungus, Penicillium notatum was found to be the most susceptible with white petal extract being the most effective. Saccharomyces cerevisiae and Fusarium oxysporum were the least susceptible to all extracts. White roses extract showed much higher antifungal activities against Penicillium notatum than red or yellow roses, therefore, it was subjected to several bioassay guided chromatographic fractionations and purification to isolate the active chemical(s) responsible for the antifungal activity. Chemical structure of the isolated antifungal compounds were identified by spectroscopy techniques and found to be a γ-sitosterol and (Z,Z)-9,12-octadecadienoic acid. Antibacterial activity of the various types of rose extracts were due to complex mixtures of organic compounds which are still under chemical investigation and will be published later.     

Novel Biodegradable Cast Film from Cherry Tree Gum,Development, Modification and Characterization

The feasibility of sweet cherry gum as a bio-based film-forming material and effect of hydrogen peroxide as a chemical modifier investigated. The influence of film compositions (gum, glycerol) and hydrogen peroxide on the physical properties of films, including solubility in water, permeability to water vapor (WVP), mechanical properties, and transparency, thermal and microstructural properties evaluated. The results showed that WVP and thickness increased by gum and glycerol concentration, but significantly decreased by hydrogen peroxide. As expected, elongation-at-break and solubility, increased at higher concentration of glycerol but the tensile strength decreased at the same condition. The film transparency was influenced by the dry weight content and was improved by higher concentrations of hydrogen peroxide. The partial degradation of polymer chain by hydrogen peroxide was observed by FTIR analysis.     

Physical development trend and green space destruction in developing cities: a GIS approach

Green spaces considered natural remnants in urban environments play a key role in promoting environmental quality and forming a sustainable city. Nowadays, development of urban spaces has taken a hasty growth. In the meanwhile, the natural green spaces are severely damaged. The current study aims at investigating the trend of changes in green space of Tabriz City, the second large industrial city in Iran, on the basis of landscape ecology principles. In order to prepare the land-cover maps, Landsat TM and IRS LISS-III of the years 1989 and 2006 were applied. Alongside, landscape percentage metrics, the largest patch index, number of patches, patch density, edge density, total edge, class area and landscape shape index were also used to analyse the changes. Metric analysis of the landscape within the studied years revealed that a large part of the region has enjoyed a rapid growth (equivalent to 64.5 %) in constructions. As the obtained results showed, the smallest landscape percentage (3.9 %) in the study area is belonged to the municipal green space, while the largest landscape percentage (66 %) is allocated to the barren land. This shows that the constructions have not balanced with creation of new green spaces, and the lack of green space per capita continues to be felt.     

Residue levels of organochlorine pesticides in some ecosystem components of Manzala Lake

To evaluate the organochlorine pesticide (OCP) contamination of Manzala Lake, its ecosystem was investigated during the winter season (December to March). The studied ecosystem components were water, sediment, aquatic weeds, and fishes in four locations. The samples were analyzed by gas chromatography with electron capture detector. Pollutant levels of total OCPs showed significantly high levels in the water areas of Round road (46.253 ng/ml), Port-Said Damietta road (19.301 ng/ml), followed by Bughas El-Rasoah (5.539 ng/ml), then Ashtoum El Gamel (natural reserve area now) (0.289 ng/ml). Organochlorines were detected in sediment only in Round road (3.359 μg/kg) and Port-Said Damietta road (0.171 μg/kg) by significant order while they were undetectable in Ashtoum El Gamel and Bughas El-Rasoah. Total OCPs in aquatic weeds ranged between 0.194 μg/kg in Port-Said Damietta and 0.026 μg/kg in Ashtoum El Gamel. While OCPs were 0.160 and 0.153 μg/kg in Round road and Bughas El-Rasoah, respectively. Concerning fish muscles OCPs were significantly higher in the Round road area (0.397 μg/kg) followed by the Port-Said Damietta road (0.258 μg/kg), and finally, Ashtoum El Gamel samples (0.126 μg/kg). The results revealed the direct relation for the accumulation of OCPs between studied ecosystem parameters at the Manzala Lake during the winter season. Results also demonstrated that fish samples collected from the Manzala Lake in the studied areas were contaminated with levels of organochlorines, not higher than the maximum permissible level recorded by FAO/WHO, and that the public is not at risk with fish consumption.     

Ultrasound-assistant preparation of Cu-SAPO-34 nanocatalyst for selective catalytic reduction of NO by NH3

The influence of the various preparation methods of Cu-SAPO-34 nanocatalysts on the selective catalytic reduction of NO with NH₃ under excess oxygen was studied. Cu-SAPO-34 nanocatalysts were prepared by using four techniques: conventional impregnation (IM), ultrasound-enhanced impregnation (UIM), conventional deposition precipitation (DP) using NaOH and homogeneous deposition precipitation (HDP) using urea. These catalysts were characterized in detail by various techniques such as N₂-sorption, XRD, TEM, H₂-TPR, NH₃-TPD and XPS to understand the catalyst structure, the nature and the dispersed state of the copper species, and the acid sites for NH₃ adsorption. All of the nanocatalysts showed high activities for NO removal. However, the activities were different and followed the sequence of Cu-SAPO-34 (UIM) > Cu-SAPO-34 (HDP) > Cu-SAPO-34 (IM) > Cu-SAPO-34 (DP). Based on the obtained results, it was concluded that the NO conversion on Cu-SAPO-34 nanocatalysts was mainly related to the high reducibility of the isolated Cu^2 + ions and CuO species, the number of the acid sites and the dispersion of CuO species on SAPO-34.     

COMPARATIVE STUDY OF FRESH-SALT WATER INTERFACES USING FINITE ELEMENT AND SIMPLE APPROACHES

ABSTRACT: The fresh-salt water interface in artesian aquifers has been investigated by various techniques on the basis of its analogy to the free surface in earth dams or cores of dams. Although various approximations are used, some more or less exact solutions exist. One of the simple methods, that would appeal to practical workers, was developed by the analysis of hydraulic forces. However, this method has not been checked thoroughly due to the lack of wide ranges of coverage by the more or less exact solutions. In this paper a suggested finite element method is used for the purpose of comparing with the method of hydraulic forces. The presented procedure eliminates some of the difficulties and uncertainties in current finite element procedures. Both methods proved to be in close agreement. Moreover, the hydraulic heads along the upper boundary of the artesian aquifer were found to be in close agreement with Dupuit's equation. The results of this investigation would greatly simplify the more complex management problems when the effects of discharge and/or recharge wells are added to the natural flow effects.     

Experimental study of the stack geometric parameters effect on the resonance frequency of a standing wave thermoacoustic refrigerator

Thermoacoustic refrigeration is an emerging technology that makes use of acoustic power to pump heat. The resonance frequency is important for the performance of thermoacoustic refrigerators, as it affects the temperature difference across the stack. This paper aims to optimize the performance of thermoacoustic refrigerators by experimentally investigating the effect of the stack geometric parameters (i.e. stack position, stack length, and the stack size) on the resonance frequency of a standing wave loudspeaker driven thermoacoustic refrigerator. Celcor Ceramic stacks of normalized positions of 0.764, 1.05, 1.43, and 1.72, normalized lengths of 0.076, 0.114, 0.153, and 0.191, and two porosities of 0.8 and 0.85 are used. The clarification of the relationship between the stack geometric parameters and the resonance frequency of the thermoacoustic refrigerator is presented. Moreover, the coefficient of performance of the thermoacoustic refrigerator is observed to increase at the resonance frequency of each stack configuration.     

GLOBAL WATER ISSUES AND THE WORLD WATER COUNCIL1

ABSTRACT: The key events and the process that led to the creation of the World Water Council on World Water Day 1996 are reviewed and its characteristics summarized. The development of this new organization is discussed in the context of the major global trends in water and water-related issues, viz. growing water scarcity with its links to limits on food production and demographic patterns. In response to the need to find solutions to these pressing water issues, the development of a Technical Program based on the deliberations of the founding member organizations and a number of short-term activities have been outlined to demonstrate the evolution of the Council in this first year of its existence. Given the importance of complementarity between the Council and the Global Water Partnership, an attempt has been made to articulate the mutually-reinforcing roles of the two organizations.