Assessment of the current municipal solid waste management system in Tehran,Iran: challenges and opportunities for sustainable development

Journal of Material Cycles and Waste Management - With over 9 million population, challenges of waste management system (WMS) of Tehran can offer some lessons to other middle-income cities. Despite...     

Experimental and DFT insights into nitrogen and sulfur co-doped carbon nanotubes for effective desulfurization of liquid phases: Equilibrium & kinetic study

• Synthesis of NS-CNTS is used in a high desulfurization performance. • Synthesizing NS-CNT is considered as a novel adsorbent from low-cost precursors. • A high sulfur removal capacity for NS-CNT is attained compared with recent works. Herein, nitrogen and sulfur co-doped carbon nanotubes (NS-CNT) adsorbents were synthesized via the chemical vapor deposition technique at 1000°C by employing the camphor, urea and sulfur trioxide pyridine. In this study, desulfurization of two types of mercaptans (dibenzothiophene (DBT) and tertiary butyl mercaptan (TBM) as nonlinear and linear forms of mercaptan) was studied. In this regard, a maximum capacity of NS-CNT was obtained as 106.9 and 79.4 mg/g and also the removal efficiencies of 98.6% and 88.3% were achieved after 4 h at 298K and 0.9 g of NS-CNT for DBT and TBM, respectively. Characterization of the NS-CNTs was carried out through exploiting scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and elemental analysis (CHN). The isotherm equilibrium data could be ascribed to the Freundlich nonlinear regression form and the kinetic data was fitted by nonlinear form of the pseudo second order model. The negative values of ΔS⁰, ΔH⁰ and ΔG⁰ specify that the adsorption of both types of mercaptans was a natural exothermic process with a reduced entropy. Maintenance of more than 96% of the adsorption capacity even after nine cycles suggest the NS-CNT as a superior adsorbent for mercaptans removal in the industry. Density functional theory (DFT) calculations were also performed to peruse the effects of S/N co-doping and carbon monovacancy defects in CNTs toward the adsorption of DBT and TBM.     

A systematic review of emerging human coronavirus (SARS-CoV-2) outbreak: focus on disinfection methods,environmental survival,and control and prevention strategies

Recently, an outbreak of a novel human coronavirus which is referred to as severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) (COVID-19) by the World Health Organization (WHO) was identified in Wuhan, China. To help combat the pandemic, a systematic review (SR) was performed to collect all available studies concerning inactivation methods, environmental survival, and control and prevention strategies. A comprehensive literature survey yielded 42 eligible studies which included in the SR. The results confirmed that the WHO recommended two alcohol-based hand rub formulations (ethanol 70–95% and 2-propanol 70–100%) had an efficient virucidal activity in less than 60 s by more and equal 4 log₁₀ (≥ 99.99) approximately and could be used for disinfection in public health and health-care facilities. The findings indicated that SARS-CoV-1 and SARS-CoV-2 can survive under different environmental conditions between 4 and 72 h approximately. The results also demonstrate that temperature and relative humidity are important factors in the survival of SARS-CoV-2. The main strategies recommended by the WHO to avoid contracting SARS-CoV-2 are hand washing several times in the day and maintaining social distancing with others. It is important to note that the more studies require addressing, the more possible airborne transmission due to the survival of SARS-CoV-2 in aerosols for 3 h approximately. We hope that the results of the present SR can help researchers, health decision-makers, policy-makers, and people for understanding and taking the proper behavior to control and prevent further spread of SARS-CoV-2.

     

Effects of sublethal concentrations of permethrin on bioaccumulation of cadmium in zebra cichlid (Cichlasoma nigrofasciatum)

The aim of this study was to evaluate the synergistic and antagonistic effects of permethrin on the bioaccumulation of cadmium in zebra cichlid (Cichlasoma nigrofasciatum). Zebra cichlid was exposed to various sublethal concentrations of permethrin combined with cadmium chloride for 15 days. Although at the lowest concentrations, permethrin (0.40 µg L^?1) decreased the bioconcentration potential of cadmium in fish, bioaccumulation of cadmium increased along with increasing concentrations of permethrin (0.80–1.20 µg L^?1). However, the magnitude of changes in the accumulation of cadmium in the fishes simultaneously exposed to 1.60 µg L^?1 permetrin and cadmium chloride was similar to the cadmium levels observed in fishes after exposure to the cadmium chloride alone. The results of this study suggest that the synergistic effects of permethrin on the bioaccumulation of cadmium highly depend on the concentrations of this pesticide in water.     

Ultrasound-assistant preparation of Cu-SAPO-34 nanocatalyst for selective catalytic reduction of NO by NH3

The influence of the various preparation methods of Cu-SAPO-34 nanocatalysts on the selective catalytic reduction of NO with NH₃ under excess oxygen was studied. Cu-SAPO-34 nanocatalysts were prepared by using four techniques: conventional impregnation (IM), ultrasound-enhanced impregnation (UIM), conventional deposition precipitation (DP) using NaOH and homogeneous deposition precipitation (HDP) using urea. These catalysts were characterized in detail by various techniques such as N₂-sorption, XRD, TEM, H₂-TPR, NH₃-TPD and XPS to understand the catalyst structure, the nature and the dispersed state of the copper species, and the acid sites for NH₃ adsorption. All of the nanocatalysts showed high activities for NO removal. However, the activities were different and followed the sequence of Cu-SAPO-34 (UIM) > Cu-SAPO-34 (HDP) > Cu-SAPO-34 (IM) > Cu-SAPO-34 (DP). Based on the obtained results, it was concluded that the NO conversion on Cu-SAPO-34 nanocatalysts was mainly related to the high reducibility of the isolated Cu^2 + ions and CuO species, the number of the acid sites and the dispersion of CuO species on SAPO-34.     

A systematic review on cigarette butt management as a hazardous waste and prevalent litter: control and recycling

Annually, over 5.5 trillion cigarettes are produced worldwide, and it is estimated that 4.5 trillion cigarette butts (CBs) are still being littered in the world. The dispersal of the CBs has caused this hazardous waste to be considered as one of the most important litters and environmental risks all over the world. This systematic study with the search protocol definition and keyword identification was developed to find the CBs control and recycling methods by searching in five scientific databases. Founded articles were monitored and finally, 35 related articles were selected and studied by the authors. The results of this study showed that CBs recycling methods have been tested in 10 specific categories all over the world. The CBs have been applied without any pre-processing methods in the bricks and asphalt production. However, other applications of the CBs such as the absorbent material production, vector control, and use as a biofilm carrier in wastewater treatment need various processing methods. The researchers also presented models and suggestions such as taxes, penalties, and public education for the control of CBs littering. Despite the innovative methods applied for the CBs recycling in previous studies, CBs have not received much attention in terms of pollutant control and environmental issues in recycling processes.

     

Study of non-revenue water status and enforcement measures to reduce water loss: case study in villages of Kermanshah Province of Iran

In this study, the volume and the cash value of water loss, and reduction of water loss as a result of enforcement action during 2011–2013 in the drinking water network of villages in Kermanshah Province, Iran, have been investigated. Date collected by referring to the different parts of rural water and waste water company of Kermanshah Province and checklist were completed. The study showed the volume of produced water and sold water has increased and the water loss percentage has decreased. High cost of water production compared to revenue of sold water and water loss resulted in significant detriments in terms of the water production costs. Water loss level decreased from 33% to 30% as result of measures taken to reduce water loss but, it is still 15% higher than the world average level. Also the reduction in number of water resources and increase in the number and volume of reservoirs indicates a lack of water and a growing need. As result of high water loss, waste of costs in the contrast of water production cost and also because physical water loss accounts for most of the water loss of villages, necessary measures can be effective in reducing loss and have economic justification.     

Positive environmental effects of the coronavirus 2020 episode: a review

Environment, Development and Sustainability - The outbreak of COVID-19 has made a global catastrophic situation that caused 1,039,406 deaths out of 35,347,404 infections, and it will also cause...     

Exposure to ionizing radiations and changes in blood cells and interleukin-6 in radiation workers

Environmental Science and Pollution Research - Long-term exposure to ionizing radiation (IR) can cause dire health consequences even less than the dose limits. Previous biomonitoring studies have...     

A study of heavy metals and their fate in the composting of tannery sludge

Tannery waste is categorized as toxic and hazardous in Malaysia due to its high content of Cr (in excess of 500 mg/kg) and other heavy metals. Heavy metals, when in high enough concentrations, have the potential to be both phytotoxic and zootoxic. Heavy metals are found as contaminants in tannery sludge. This investigation aimed to identify the fate of chromium, cadmium, copper, lead, and zinc concentrations in tannery sludge throughout a 50-day composting cycle. The results of this study showed a general increase in the removal of Cr, Cd, Pb, and to a much smaller extent Zn and Cu, manifested by a decrease in their overall concentrations within the solid fraction of the final product (the decreases were likely the result of leaching). Furthermore, in using a sequential extraction method for sludge composting at different phases of treatment, a large proportion of the heavy metals were found to be associated to the residual fraction (70-80%) and fractions more resistant to extraction, X-NaOH, X-EDTA, X-HNO3 (12-29%). Less than 2% of the metals were bound to bioavailable fractions X-(KNO3+H2O).