Environmental impact of exhaust emissions by Arctic shipping

Since 2005, a dramatic decline of the Arctic sea-ice extent is observed which results in an increase of shipping activities. Even though this provides commercial and social development opportunities, the resulting environmental impacts need to be investigated and monitored. In order to understand the impact of shipping in arctic areas, the method described in this paper determines the travel time, fuel consumption and resulting exhaust emissions of ships navigating in arctic waters. The investigated case studies are considering ship particulars as well as environmental conditions with special focus on ice scenarios. Travel time, fuel consumption and exhaust gas emission were investigated for three different vessels, using different passages of the Northern Sea Route (NSR) in different seasons of years 1960, 2000 and 2040. The presented results show the sensitivity of vessel performance and amount of exhaust emissions to optimize arctic traffic with respect to efficiency, safety and environmental impact.     

Enhanced degradation of the antibiotic tetracycline by heterogeneous electro-Fenton with pyrite catalysis

There is actually increasing concern about the accumulation of antibiotics, such as tetracycline, in soil and water bodies. There is therefore a need for efficient methods to degrade antibiotics and thus clean waters. Here we tested the degradation of tetracycline using the heterogeneous electro-Fenton-pyrite method and compared the results with the conventional electro-Fenton method. The reaction was performed with a boron-doped diamond or Pt anode and carbon-felt cathode allowing electrogeneration of H₂O₂ from O₂ reduction. Results show an increasing tetracycline mineralization using the following methods: anodic oxidation with electrogenerated H₂O₂, electro-Fenton and then electro-Fenton-pyrite using boron-doped diamond. Ion-exclusion HPLC revealed the complete removal of malic malonic, succinic, acetic, oxalic and oxamic acids. Nitrogen present in tetracycline was mainly mineralized in NH₄ ⁺. The higher efficiency of electro-Fenton-pyrite is explained by self-regulation of soluble Fe²⁺ and pH to 3.0 from pyrite catalyst favoring larger ^·OH generation from Fenton’s reaction.     

CFD Investigation of Particle Deposition in a Horizontal Looped Turbulent Pipe Flow

This paper presents comprehensive 3D numerical investigations on depositions of particles flowing through a horizontal pipe loop consisting of four bends. The multiphase mixture model available in FLUENT 6.2 was used in this study. In this numerical simulation, five different particle sizes have been used as secondary phases to calculate real multiphase effect in which inter-particle interaction has been considered. The deposition of particles along the periphery of the pipe wall was investigated as a function of particle size and fluid velocity. The simulations showed that near the upstream of the bends, maximum particle concentration occurred at the bottom of the pipe. However, downstream the bends, the maximum particle concentration occurred at an angle of 60° from the bottom. The larger particles clearly showed deposition near the bottom wall except downstream. As expected, the smaller particles showed less tendency of deposition and lesser at higher velocity. This numerical investigation showed qualitative agreement with the experiments conducted by Commonwealth Scientific and Industrial Research Organisation, Melbourne team for similar conditions.     

Alternative amendment for soluble phosphorus removal from poultry litter

Background, aim, and scope  

Alum (aluminum sulfate) is the currently preferred chemical amendment for phosphorus (P) treatment in poultry litter (PL). Aluminum-based drinking-water treatment residuals (Al-WTRs) are the waste by-product of the drinking-water treatment process and have been effectively used to remove P from aqueous solutions, but their effectiveness in PL water extracts has not been studied in detail. Elevated cost associated with alum could be minimized by using the equally effective WTRs to remove soluble P from PL, and they can be obtained at a minimal cost from drinking-water treatment plants.     

Chitosan-polypropylene imine dendrimer hybrid: a new ecological biomordant for cochineal dyeing of wool

The classical use of synthetic dyes is causing issues of environmental pollution and heath risk. As a consequence natural dyes are gaining interest, but the use of natural dyes still includes toxic reagents such as metals as mordants and acids to enhance color and yield. Therefore, we designed a new chitosan-polypropylene imine dendrimer hybrid at 0–2000 mg/L to treat wool before dyeing with cochineal. We compared dye exhaustion, color depth, color characteristics, and color fastness of the new process with dyed pristine and metal mordanted wool. Results show that wool pretreatment improved dye exhaustion from 48 to 88 %, shifted saturation point toward lower dye concentration from 3000 to 1000 mg/L, and improved color depth from 13.68 for pristine wool and 15.17 for metal mordanted wool to 23.89 for the new process.     

An investigation on pollutant emissions from co-firing of RDF and coal

Pollutant emissions from co-firing of refuse derived fuel (RDF) and coal were investigated in a vortexing fluidized bed combustor (VFBC). RDF-5 was made of common municipal solid waste (MSW). CaCO₃ was injected in the combustor to absorb HCl at 850 °C. The results show that NO_x and HCl emissions increase with RDF-5 co-firing ratio. The NO_x concentration in flue gas at the bottom of the combustor is higher than that at the top. However, the trend of HCl released is reverse compared with NO_x emissions. It was found that the HCl concentration decreases with increasing the molar ratio of Ca/Cl. However, the effect of CaCO₃ addition on HCl retention is not significant when the molar ratio of Ca/Cl is higher than 5. The chlorine content in fly ash increases obviously with the molar ratio of Ca/Cl. PCDD/Fs emissions decrease slightly with an addition of CaCO₃. In this study incomplete combustion is regarded as the main cause for polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) formation.     

International Environmental Agreements: Design of Optimal Transfers Under Heterogeneity

International environmental agreements (IEAs) can coordinate abatement of transboundary pollutants. This paper investigates how heterogeneous countries facing a stock pollutant might structure such an agreement. In particular, we examine how an IEA might be implemented with a set of monetary transfers. The focus is on transfers that are time invariant, linear in emissions, and consistent with budget balance. There is a range of such schemes that would induce efficient emissions. We provide a simple and intuitive characterization of these penalties and describe how specific proposals might be chosen in order to facilitate compliance and implementation. Our proposals are illustrated with a simple example. We show that heterogeneity reduces the scope for penalty schemes to jointly satisfy desirable properties.     

Analytical survey of arsenic in geothermal waters from sites in Kyushu,Japan, and a method for removing arsenic using magnetite

The objective of this study was to survey the cation and anion contents of geothermal waters to gather fundamental information on geographical variations. Sixteen sites in hot spring areas on the island of Kyushu in Japan were studied. The study focused on the arsenic content of the samples. Very high arsenic concentrations (more than 0.1 mg/l) were detected in most of the geothermal waters sampled. High contents of boron and fluoride (more than 1.0 mg/l) were also detected in some samples. Arsenic removal was performed on a laboratory scale using columns packed with a magnetite-type adsorbent. The reduction of arsenic contamination to a concentration of less than 0.01 mg/l could be achieved in the early stages of adsorption (bed volume = 200).     

Bio-drying and size sorting of municipal solid waste with high water content for improving energy recovery

Bio-drying can enhance the sortability and heating value of municipal solid waste (MSW), consequently improving energy recovery. Bio-drying followed by size sorting was adopted for MSW with high water content to improve its combustibility and reduce potential environmental pollution during the follow-up incineration. The effects of bio-drying and waste particle size on heating values, acid gas and heavy metal emission potential were investigated. The results show that, the water content of MSW decreased from 73.0% to 48.3% after bio-drying, whereas its lower heating value (LHV) increased by 157%. The heavy metal concentrations increased by around 60% due to the loss of dry materials mainly resulting from biodegradation of food residues. The bio-dried waste fractions with particle size higher than 45 mm were mainly composed of plastics and papers, and were preferable for the production of refuse derived fuel (RDF) in view of higher LHV as well as lower heavy metal concentration and emission. However, due to the higher chlorine content and HCl emission potential, attention should be paid to acid gas and dioxin pollution control. Although LHVs of the waste fractions with size <45 mm increased by around 2× after bio-drying, they were still below the quality standards for RDF and much higher heavy metal pollution potential was observed. Different incineration strategies could be adopted for different particle size fractions of MSW, regarding to their combustibility and pollution property.