氧化物载体对Ni-V催化剂催化燃烧二氯甲烷的影响

以Al₂O₃,TiO₂,ZrO₂ 3种氧化物为载体,通过溶胶凝胶法制备以Ni-V双金属氧化物为活性组分催化剂,在固定床反应器上研究了催化剂的二氯甲烷（DCM）催化燃烧性能.并通过XRD、BET、FTIR-Pyridine和H₂-TPR表征分析催化剂的物理化学特性,结果表明催化剂的氧化还原性能与酸性存在一定的协同能力促进DCM的催化氧化.10% Ni-V/Al₂O₃和10% Ni-V/TiO₂催化剂表面大量的酸性位点和强氧化性使得催化剂在催化燃烧DCM时拥有较好的活性,其中10% Ni-V/Al₂O₃在252℃时就有90%的转化率,但其在低温时易产生含氯有机副产物的CH₃Cl,并且50h连续稳定性测试发现其有失活现象.而10% Ni-V/TiO₂催化剂达到90%转化率时温度为274℃,且其在DCM降解中并没有CH₃Cl的产生,稳定性测试中也没有失活现象发生,这可能是与其拥有更多中强度B酸以及较强氧化还原能力有关.     

城市污水中重金属对活性污泥系统的影响与对策

通过分析城市污水中重金属的种类与浓度,结合重金属的毒性,选取Cu、Zn、Cr为研究对象,考察了这3种金属离子对活性污泥工艺系统的刺激和抑制作用,包括对微生物种类、微生物生长、基质消耗和处理效果的影响。分析了重金属毒性的影响因素,包括金属种类及浓度、工艺类型、驯化程度等,并相应地提出一些处理重金属废水的可行措施,可采用耐冲击负荷的SBR工艺、或者将活性污泥针对重金属进行驯化、适当提高污泥浓度等,提出了该领域可能的几个研究方向。     

燃烧过程中煤氮热迁移特性研究进展

燃烧过程中煤氮的热迁移特性决定着NOx的生成与最终排放量,并对控制和治理燃煤过程中NOx污染具有重要指导意义。将煤氮的热迁移过程分为挥发分氮及焦炭氮2个不同热迁移路径进行讨论,归纳了在燃烧过程中挥发分氮及焦炭氮热迁移的特性及相关影响因素。最后提出了"定量解析煤氮热迁移过程"这一国际学术难题的研究突破口。     

β-环糊精包埋纳米零价铁对Cd~(2+)的去除性能研究

为提高纳米Fe0的稳定性,以环氧氯丙烷为交联剂,以β-环糊精为原料对纳米Fe0进行包埋。考察了碱度、交联剂用量对聚合物交联度的影响,对比研究了30%、40%Na OH介质对包埋纳米Fe0去除Cd2+反应活性的影响。利用SEM、TGA对包埋材料的表面形态及热稳定性进行了分析。实验结果表明:40%Na OH介质中交联包埋的纳米Fe0具有更高的反应活性;当Cd2+浓度为100 mg/L时,投加包埋材料3.0 g,反应150 min,Cd2+去除率可达98.9%;于空气中放置1个月,其对Cd2+去除率仍可达90.5%。     

海藻酸钠/β-环糊精固定化纳米Fe~0去除重金属的性能研究

针对纳米Fe0在空气中易被氧化的问题,应用海藻酸钠、β-环糊精对纳米Fe0进行协同固定化,考察了原料配比、交联剂浓度等对凝胶球性能的影响,并对固定化纳米Fe0材料的稳定性进行了考察。实验结果表明:以1.5%SA、0.5%β-CD为原料,4.0%Ca Cl2为交联剂制备的固定化纳米Fe0具有较高的反应活性;固定化Fe0对Pb2+的去除效率明显高于Cd2+,反应4 h,200 mg/L的Pb2+去除率可达99.3%,主要通过凝胶球与Fe0联合作用去除。该材料保存120 d后仍具有较高的反应活性。     

TiO2纳米管光电催化降解酸性橙染料

采用电化学阳极氧化法在金属钛表面制备锐钛矿型TiO2纳米管,并以TiO2纳米管薄膜为阳极,考察溶液pH、外加偏压以及NaC1浓度对酸性橙的光电催化降解反应的影响.实验结果表明:在溶液pH为3.0、外加偏压为2.5V、NaCl浓度为0.05 mol/L的最佳实验条件下反应30 min,酸性橙降解率可达99.99％;TiO2纳米管重复使用25次,酸性橙降解率仍可达94.57％.     

南通富水砂层盾构隧道开挖对邻近桩基影响分析

为有效控制盾构隧道近距侧穿既有桥梁桩基施工,给桩基造成一定安全风险,本文依托南通地铁1号线区间盾构工程,建立三维有限元模型,基于流固耦合理论分析盾构施工对桩基水平位移、内力、地表沉降的影响,并验证计算的准确性。结果表明:盾构开挖面距离桩基2D范围内,盾构施工对桩基产生的影响占总水平位移的85%;桩基产生的最大水平位移为16.13 mm;盾构施工引起桩基剪力和弯矩的变化量明显。在富水砂层类似工程施工中应加强监测,同时采取优化盾构掘进参数和地层加固等措施,减小盾构施工对桩基影响。     

大连市马栏河污水排海工程环境效益分析

运用平流输运扩散模型对大连市马栏河污水排海工程岸边排放和深水排放的海水水质进行预测,分析比较了两种排放方式的水质状况。结果表明,与同等排放量岸边排放方式比较,在经一级处理深水排放情况下,受纳污水水体的海水质量状况大大改善,符合海洋功能区划(二类水质标准)的要求,混合区面积大大小于《污水海洋处置工程污染控制标准》(GWKB4-2000)对混合区范围的要求。     

Independent factors associated with bicycle helmet use in a Korean population: A cross-sectional study

Objective: Although identification of factors that influence helmet use during bicycle riding is necessary for the selection of groups that require safe cycling education, limited baseline data are available. The aim of the present study was to analyze the rate of helmet use and the demographic factors that were independently associated with helmet use among Korean bicycle riders.

Methods: In this cross-sectional study, we used public data from the Sixth Korean National Health and Nutrition Examination Survey conducted in 2013 and 2014. Helmet users were defined as subjects who always, usually, or frequently wore helmets when cycling. Independent factors associated with helmet use were determined using odds ratios (ORss) adjusted for 5 demographic factors via multivariate logistic regression analysis.

Results: In the total population, 4,103 individuals were bicycle riders; among these, 782 individuals (19.1%) wore helmets. A total of 21.1% of male riders used helmets, compared to 15.5% of female riders (P <.001). The adjusted logistic regression model revealed that female sex (OR = 0.665; 95% confidence interval [CI], 0.554–0.797), teenage status (OR = 0.475, 95% CI, 0.333–0.678), and low household income (OR = 0.657, 95% CI 0.513–0.841) were significantly associated with nonuse of helmets.

Conclusions: Female sex, teenage status, and low household income were independent factors associated with the nonuse of helmets. We identified factors associated with helmet use during bicycle riding through analysis of baseline data on helmet usage.     

Multifunctional metal-organic frameworks in oil spills and associated organic pollutant remediation

The release of toxic organic compounds into the environment in an event of oil spillage is a global menace due to the potential impacts on the ecosystem. Several approaches have been employed for oil spills clean-up, with adsorption technique proven to be more promising for the total reclamation of a polluted site. Of the several adsorbents so far reported, adsorbent-based porous materials have gained attention for the reduction/total removal of different compounds in environmental remediation applications. The superior potential of mesoporous materials based on metal–organic frameworks (MOFs) against conventional adsorbents is due to their intriguing and enhanced properties. Therefore, this review presents recent development in MOF composites; methods of preparation; and their practical applications towards remediating oil spill, organic pollutants, and toxic gases in different environmental media, as well as potential materials in the possible deployment in reclaiming the polluted Niger Delta due to unabated oil spillage and gas flaring.