Effect of a high strength chemical industry wastewater on microbial community dynamics and mesophilic methane generation

A high strength chemical industry wastewater was assessed for its impact on anaerobic microbial com- munity dynamics and consequently mesophilic methane generation. Cumulative methane production was 251 mL/g total chemical oxygen demand removed at standard temperature and pressure at the end of 30 days experimental period with a highest recorded methane percentage of 80.6% of total biogas volume. Volatile fatty acids （VFAs） analysis revealed that acetic acid was the major intermediate VFAs produced with propionic acid accumulating over the experimental period. Quantitative analysis of microbial communities in the test and control groups with quantitative real time polymerase chain reaction highlighted that in the test group, Eubacteria （96.3%） was dominant in comparison with methanogens （3.7%）. The latter were dominated by Methanomicrobiales and Methanobacteriales while in test groups increased over the experimental period, reaching a maximum on day 30. Denaturing gradient gel electrophoresis profile was performed, targeting the 16S rRNA gene of Eubacteria and Archaea, with the DNA samples extracted at 3 different time points from the test groups. A phylogenetic tree was constructed for the sequences using the neighborhood joining method. The analysis revealed that the presence of organisms resembling Syntrophomonadaceae could have contributed to increased production of acetic and propionic acid intermediates while decrease of organisms resembling Pelotomaculum sp. could have most likely contributed to accumulation of propionic acid. This study suggested that the degradation of organic components within the high strength industrial wastewater is closely linked with the activity of certain niche microbial communities within eubacteria and methanogens.     

Reviews of emission of biogenic volatile organic compounds (BVOCs) in Asia

Biogenic volatile organic compounds(BVOCs) in the atmosphere play important roles in the formation of ground-level ozone and secondary organic aerosol(SOA) in global scale and also in regional scale under some condition due to their large amount and relatively higher reactivity.In places with high plant cover in the tropics and in China where air pollution is serious,the effect of BVOCs on ozone and secondary organic aerosols is strong.The present research aims to provide a comprehensive review ...     

pH、溶解氧、叶绿素a之间相关性研究Ⅰ:养殖水体

利用国内、外近20年的资料和饮用水水源地潘家口水库现场围隔实验结果,分析养殖水体中pH、溶解氧(dissolved oxygen,DO)和叶绿素a之间的相互关系.结果表明,当叶绿素a平均含量低于10μg/L时,水体交换弱的夏季和秋季养殖水域水体中pH、DO与叶绿素a无明显相关甚至无相关;水体交换强的夏季和秋季养殖水域水...     

不同湿地模型中根系微生物的多样性

为了研究不同植物和滤料组合的小型湿地模型在处理养殖池塘水体过程中根系微生物群落的特征,并分析植物对根系微生物富集的影响,本研究对两种植物(茭白和慈菇)和两种滤料(石榴石和磁铁矿)进行组合构建了6种不同的湿地模型,并利用高通量测序技术分析湿地植物根系微生物的结构特点和多样性.结果表明:不同湿地模型根系微生物的种类和数量各不相同;所有收集的微生物总体上属于52个门,118个纲,455科,905个属和1 426个种;根据Shannon指数,茭白(平均为5.77)比慈菇(平均为5.29)在微生物富集方面具有更强的能力;但是,慈菇和茭白根系微生物中变形菌门的比例分别平均为61.97%和51.78%,说明慈菇能够更好地富集变形菌.β-变形菌纲为实验期间不同植物根际富集的主要细菌类群.本研究结果为人工湿地植物优化选择提供了理论基础和湿地组合最佳构建提供了基础资料.     

γ-Al2O3负载多金属复合催化剂选择性催化还原烟气脱硝

以γ-Al₂O₃作为载体,先后负载CeO₂,MnC₂O₄,Fe（NO₃）₃,CrO₃,Ni（NO₃）₂,NH₄VO₃等多种金属组分制备γ-Al₂O₃负载多金属复合催化剂,并用于模拟烟气的选择性催化还原脱硝。通过SEM和XRD技术对催化剂进行了表征。表征结果显示：Fe,Mn,Cr的添加能增加催化剂的低温催化活性、提高催化剂的N₂选择性;γ-Al₂O₃对活性金属氧化物的负载效果良好。实验结果表明：各金属化合物的最佳加入量为 w（MnC₂O₄·2H₂O）=20%,w（Fe（NO₃）₃·9H₂O）=15%,w（CrO₃）=10%,w（Ni（NO₃）₂·6H₂O）=5%,w（NH₄VO₃）=10%,w（CeO₂）=5%,w（γ-Al₂O₃）=35%;以在最佳正交实验条件下制得的γ-Al₂O₃负载多金属复合物为催化剂,在脱硝反应温度为205 ℃的条件下,NO转化率为96.7%;γ-Al₂O₃负载多金属复合催化剂经5次重复使用,NO转化率仍可稳定在94%左右。     

地下水除草剂阿特拉津污染微生物治理的实验研究

采用了从农药厂阿特拉津生产车间排污口污泥中分离出的菌种AT菌,进行了农药阿特拉津的静态降解实验及其污染地下水的微生物治理模拟实验研究结果表明,AT菌在pH值为5.0～10.0时对农药污染质阿特拉津均具有降解能力,且适宜的pH值范围为6.5～8.0;在实验条件(t=10℃,pH=7.5)与野外含水层的条件基本一致情况下,难于生物降解的污染质阿特拉津的一次投菌降解率达到31.08%;同时环境因素也随着AT菌作用的变化而变化,其中,DO、pH随AT菌作用加强而其值减小.另外,设计了细菌的投放方式以模拟野外条件下的菌种投加条件.并且AT菌的作用会造成被治理含水层的渗透性能降低,实验后含水层的渗透系数下降60.54%.清水冲洗10d的渗透性恢复率为48.96%,说明清水渗透恢复的方法效果明显.     

应用WRF/Chem模拟河南冬季大气颗粒物的区域输送特征

基于WRF/Chem模式,设置多组区域排放源的情景实验定量估算河南、京津冀、山东、山西、安徽和江苏、湖北6个区域人为源排放对河南省2015年12月PM_(2.5)和PM_(10)浓度贡献率,并结合气象资料研究3个代表性城市的污染输送特征.结果表明:河南省冬季PM_(2.5)和PM_(10)主要来源为本省排放,平均贡献率分别为54.83%、61.32%.区域污染输送对河南颗粒物的贡献也占有很大比例,京津冀、安徽和江苏、山东、山西以及湖北对PM_(2.5)平均贡献率分别为11.95%、11.69%、7.95%、7.40%、4.30%,对PM_(10)平均贡献率分别为10.42%、10.03%、7.00%、6.89%、3.80%.PM_(2.5)外来输送率比PM_(10)要高,表明细颗粒物比粗颗粒物更易跨区域长距离输送.冬季长持续时间的污染过程大多受静风或小风控制,省内污染贡献最大,过程结束时伴随着大风,周边区域的污染贡献有所增加.不同城市的颗粒物来源与其地理位置、风速、风向等气象条件密切相关.区域污染来源具有复杂性,改善河南省空气质量是需要整个区域共同面对和解决的问题.     

Remediation of copper polluted red soils with clay materials

Attapulgite and montmorillonite were utilized to remediate heavy metal polluted red soils in Guixi City, Jiangxi Province, China. The e ects of clay minerals on availability, chemical distribution, and biotoxicity of Cu and Zn were evaluated. The results provided a reference for the rational application of clay materials to remediate heavy metal contaminated soils. From the sorption experiment, the maximum adsorbed Cu2+ by attapulgite and montmorillonite was 1501 and 3741 mg/kg, respectively. After polluted red soil was amended with attapulgite or montmorillonite and cultured at 30 and 60 days, soil pH increased significantly compared to the control. An 8% increase in the amount of montmorillonite in soil and 30 days incubation decreased acid exchangeable Cu by 24.7% compared to the control red soil. Acid exchangeable Cu decreased with increasing amounts of attapulgite and montmorillonite, with best remediation e ect reached at a dose of 8%. Results also showed that the Cu poisoning e ect on earthworms was reduced with the addition of attapulgite and montmorillonite. Montmorillonite showed the best e ect, with the addition of a 2% dose the mortality of earthworms decreased from 60% to zero compared to the control. Our results indicated that the bioavailability of Cu in soils was reduced more e ectively with the application of montmorillonite than attapulgite.     

苏州河氨化菌分布及生理生化研究

对苏州河氨化菌进行了生态调查,并对其进行了生理生化分析。研究结果表明,苏州河水体中氨化菌数量普遍较高,上游至下游氨化菌数量逐步增多。氨化菌数量与水体中总氮和氨氮呈正比,与硝酸盐成反比。     

航空电连接器海洋环境加速试验与腐蚀仿真研究

目的 通过加速试验和有限元仿真,研究航空电连接器在南海岛礁服役条件下的失效行为和腐蚀机理.方法 根据典型航空装备南海服役环境数据,设计海洋环境加速腐蚀试验环境谱,基于此环境谱开展航空电连接器在实验室加速试验条件下的外观腐蚀、接触电阻、绝缘电阻和耐压强度的变化行为和机理研究.重点分析接触电阻变化原因,并基于水平集方法,建立插针插孔结合处的COMSOL有限元腐蚀仿真模型,模拟和验证接触件的腐蚀行为和机理.结果 3种规格的电连接器均发生壳体腐蚀,但程度不同,其中不锈钢壳体电连接器壳体腐蚀最轻,但壳体内部金属卡圈腐蚀最严重,其接触电阻波动最大.所有电连接器的耐压强度和绝缘电阻均有明显减小.结论 导致接触电阻增加的直接原因是插针和插孔结合处的毛细区内发生了严重腐蚀.有限元模型复现了腐蚀界面发展和腐蚀产物沉积过程.