A novel use of TiO2 fiber for photocatalytic ozonation of 2,4-dichlorophenoxyacetic acid in aqueous solution

More efficient oxidation methods are needed to degrade especially newly emerging recalcitrant organic contaminants at low concentrations in the water environment. Reduced photonic efficiency of immobilized TiO2 is a major challenge in TiO2-assisted advanced oxidation processes (AOP). Mineralization of 2,4-dichllorophenoxyacetic acid (2,4-D) in low aqueous solution by O3/UV/TiO2 using the world's first high-strength TiO2 fiber was investigated and compared with O3, UV/TiO2, and O3/TiO2 in laboratory batch ex...     

A survey on characteristics of leachate pond in an offshore municipal solid waste disposal site

Leachate from a landfill is collected and flowed in leachate accumulation pond, and sent to treatment facility. However, leachate in the pond can be a source of complaints from residents due to off coloration or odor, particularly near heavily populated urban areas. In this study, for the purpose of appropriate control of leachate pond, pond water and sediment were sampled in an offshore municipal solid waste disposal site 2 years after the disposal site was closed, and analyzed some parameters to estimate their properties. The pond water had high alkalinity due to the disposal of incineration residues, and EC and COD_Mn were also high. On the other hand, Cr, Mn, Fe, Cu, Zn, Cd, and Pb did not exceed the Japanese effluent water standards. Total sulfide was detected from all sediment samples during the sampling period, and values in the summer were slightly higher than at other times. To investigate the stabilization of targeted disposal site, the relationships among cumulative liquid/solid ratio (L/S) with pH and Cl^? elution after closing the site were examined. Both parameters showed a direct relationship with cumulative L/S ratio, which can be anticipated to continue increasing in the future.     

Alkaline hydrolysis of photovoltaic backsheet containing PET and PVDF for the recycling of PVDF

Recovering fluorine from end-of-life products is crucial for the sustainable production and consumption of fluorine-containing compounds because fluorspar, an important natural resource for fluorine, is currently at a supply risk. In this study, we investigated the feasibility of chemically recycling a fluorine-containing photovoltaic (PV) backsheet for fluoropolymer recycling. Herein, a PV backsheet consisting of laminated polyethylene terephthalate (PET) and polyvinylidene fluoride (PVDF) was treated with different concentrations of sodium hydroxide (NaOH) to hydrolyze the PET layer to water-soluble sodium terephthalate (Na₂TP) and to separate pure PVDF layer as a solid material. Optimized alkaline conditions (up to 10 M NaOH at 100 °C for 2 h) were determined, under which 87% of the PET layer could be decomposed without any significant deterioration of the PVDF layer. The hydrolysis kinetics of PET layer in NaOH could be explained by the modified shrinking-core model. Considering that the mass of end-of-life PV panels in Japan is estimated to increase to approximately 280,000 tons per year by 2036, PV backsheets are attractive candidates for fluoropolymer recycling, which can be effectively achieved using chemical recycling approach demonstrated in this study.

     

Bench-scale PVC swelling and rod milling of waste wire harnesses for recovery of Cu,PVC, and plasticizers

Journal of Material Cycles and Waste Management - In this study, we conducted bench-scale investigations for the recovery of Cu wires, PVC coatings, and plasticizers from long non-uniform cables by...     

Effects of heating rate and temperature on product distribution of poly-lactic acid and poly-3-hydroxybutyrate-co-3-hydroxyhexanoate

In this study, poly-lactic acid (PLA) and poly-3-hydroxybutyrate-co-3-hydroxyhexanoate (PHBH) were pyrolyzed at various temperatures (300, 350, 400, 500, 600, and 700 °C) and heating rates (5, 10, 20, 30, and 40 °C min⁻¹) using a pyrolysis–gas chromatograph/mass spectrometer (Py–GC/MS). The results revealed that the main pyrolysis products of PLA were acetaldehyde, lactide (including meso-lactide and d-, l-lactide), and oligomers. Crotonic acid and its oligomers accounted for most of the PHBH pyrolyzates. The pyrolysis temperature significantly correlated with the product distribution, but the heating rate had a small effect on the product distribution. Lactide and crotonic acid were two kinds of high-value chemicals, and their highest yields were obtained at 400 and 600 °C with 29.7 and 72.6 area %, respectively. Secondary reactions could not be neglected at 700 °C, and acetaldehyde and crotonic acid decreased to 65.0 and 69.6 area %, respectively. These results imply that pyrolyzate selectivity can be controlled by temperature management during pyrolysis.