Systemically-induced response of cabbage plants against a specialist herbivore, Pieris brassicae

Summary. Plant responses to herbivory might directly affect the herbivore (“direct” defences) or might benefit the plant by promoting the effectiveness of natural antagonists of the herbivores (“indirect” defences). Brussels sprouts attacked by Pieris brassicae larvae release volatiles that attract a natural antagonist of the herbivores, the parasitoid Cotesia glomerata, to the damaged plant. In a previous study, we observed that feeding by caterpillars on the lower leaves of the plant triggers the systemic release of volatiles detectable by the parasitoids from upper leaves of the same plant.?The role of these systemically induced volatiles as indirect defence and the dynamics of their emission were investigated in wind-tunnel dual choice tests with C. glomerata. The systemically induced emission of volatiles varied depending on leaf age and on plant age. Systemic induction affected parasitoid effectiveness, as induced plants could be more easily located by parasitoids than non-induced ones.?The role of the systemic induction as a direct defence was investigated through behavioural and feeding tests with P. brassicae. In dual choice assays, 1st instar larvae preferred to feed and fed more on systemically induced than on non-induced leaves. In single choice assays, the leaf area consumed by caterpillars was larger on systemically induced leaves than on non-induced control leaves. However, caterpillars fed on systemically induced leaves attained the same weight as those feeding on non-induced controls. In addition, P. brassicae pupae whose larvae were fed on systemically induced leaves had longer developmental times than those of larvae fed on non-induced leaves. Adult oviposition behavior was not influenced by systemic induction.?We conclude that systemically induced responses in cabbage might reduce P. brassicae fitness both directly, by affecting their development and feeding behavior and indirectly by making caterpillars and pupae more vulnerable to attack by carnivores. The occurrence of a possible relationship between direct and indirect defence is discussed. Received 24 January 2001; accepted 3 May 2001.     

Air pollution sources of PM10 in Buenos Aires City

To elucidate the sources of PM(10) air pollution from the experimental information collected in a local air quality monitoring campaign we have applied two methods, effective variance and genetic algorithms, in the solution of the chemical mass balance. The comparison of these two mathematical approaches show that the identification of the possible sources and the evaluation of its contributions are quite independent of them. The role of possible different sources for major and trace elements and the significance of standardizing available data is also addressed. We also present a simple method for identifying the number of candidate sources, a key element defining the dimension of the search space.     

Comparing growth development of <Emphasis Type="Italic">Myriophyllum</Emphasis> spp. in laboratory and field experiments for ecotoxicological testing

BACKGROUND, GOALS AND SCOPE: Risk assessment of herbicides and the evaluation of contaminated sediments based on algae and the macrophyte Lemna sp. alone may underestimate the potential hazard of certain compounds. Therefore, various test systems with Myriophyllum spp. have been developed recently to assess the phytotoxicity in surface waters and natural sediments. In the present study, experiments investigating the growth development of Myriophyllum spp. were performed in the laboratory under defined conditions and in mesocosms under environmentally realistic exposure conditions to evaluate the suitability of these species as potential standard test organisms in ecotoxicological testing. This study provides data on the endpoints biomass, plant length and root development. MATERIALS AND METHODS: Six independent experiments were performed to investigate the plant development of Myriophyllum spp. under control conditions. The main difference in the experiments was the complexity of the test systems ranging from simple laboratory experiments to complex outdoor mesocosm studies. At the start of each experiment, uniform cuttings of Myriophyllum spp. were placed in vessels with or without sediments to reduce variability between replicates. The endpoints considered in this investigation were biomass (fresh weight of the whole plant), length of the main shoot, length of the side shoots, total length of the plant (calculated from the length of the main and side shoots) and root formation. Root to shoot ratios were calculated as a further measure for plant development. Relative growth rates (RGR) based on plant length (RG(L)R) and on biomass (RG(B)R) were calculated. RESULTS: Despite the various experimental conditions, comparable growth was obtained in all test systems and the variability of endpoints, such as total length and biomass of plants, was low. It was observed that the RGR of M. spicatum in the simple laboratory test system with sediment were comparable to growth data obtained for M. verticillatum and M. spicatum grown in indoor and outdoor mesocosms, thus indicating that Myriophyllum growth tends to increase by the addition of sediment. High variability was determined for the endpoints length of the side shoots, total root length and biomass of roots. DISCUSSION: One challenge for a test design to investigate phytotoxicity on aquatic plants is to obtain good growth of the plants. From the results, it can be concluded that the experimental conditions in the various test systems were suitable to study the plant development of Myriophyllum spp. because obtained growth rates were comparable between laboratory and field investigations. Another challenge for developing a plant biotest system is the definition of sensitive endpoints. Low variability is preferred to detect minor effects of chemicals or polluted sediments on plant development. In our studies, the variability of the endpoints biomass and total length of plant was low and, therefore, they have much potential as endpoints for assessing toxicity. CONCLUSIONS: The methodologies presented in this study have applications within the risk assessment for aquatic plants and have the advantage of assessing effects taking into account the relevant exposure pathways via water and/or sediment for compounds under investigation. RECOMMENDATIONS AND PERSPECTIVES: Setting safe quality criteria for surface water and sediments is one of the challenges authorities are facing today. Myriophyllum spp. is recommended as suitable test species to investigate phytotoxicity in surface water and sediments. These results, thus, might serve as a basis for the compilation of a new harmonised guideline for ecotoxicological testing with aquatic macrophytes.     

TEQ(S) and body burden for PCDDs, PCDFs, and dioxin-like PCBs in human adipose tissue

Polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), mono-ortho and non-ortho polychlorinated biphenyls (dioxin-like PCBs) were determined in samples of human fat tissue from nine Italian obese patients. The toxicity equivalent (TEQ) values ranged from 9 to 25pgTEQg(-1) lipid (WHO-TEF values, 2005 [Van den Berg, M., Birnbaum, L.S., Denison, M., De Vito, M., Farland, W., Feeley, M., Fiedler, H., Hakansson, H., Hanberg, A., Haws, L., Rose, M., Safe, S., Schrenk, D., Tohyama, C., Tritscher, A., Tuomisto, J., Tysklind, M., Walker, N., Peterson, R.E., 2006. The 2005 World Health Organization reevaluation of human and mammalian Toxic Equivalency Factors for dioxins and dioxin-like compounds. Toxicol. Sci. 93, 223-241]), the contribution of dioxin-like PCBs was more than 30% of the total TEQ values. The obese body burdens varied from 6 to 11ngTEQkg(-1) body weight (BW), exceeding the estimated steady-state body burden 5ngTEQkg(-1) BW, based on lipid adjusted serum concentrations from several populations in the mid-1990s, calculated in the risk assessment US EPA document.     

Satellite-based indices in the analysis of land cover for municipalities in the province of Siena, Italy

Territorial indicators based on the satellite measured reflected or emitted energy can provide valuable information on the spatial evolution of a territory. Information regarding land use, biomass coverage and radiant temperature were obtained from remotely obtained measurements for each municipality in the Province of Siena. Remotely sensed data were combined into different indices to compare characteristics of land cover between territories and create an information base for continued study. A classification was performed on a municipal level and land use classes were grouped together and a general index of use pressure was created. A vegetation index was used to compare biomass densities. A radiant temperature index was calculated using measure thermal infrared emissions. The results of these analyses allowed researchers to examine the intra and inter-municipal spatial heterogeneity within the Province. A comparison between the results of each index was made and the problems related to the use of such indices were examined.     

A meta‐analytic investigation into the moderating effects of situational strength on the conscientiousness–performance relationship

Debates about the utility of conscientiousness as a predictor of job performance have focused primarily on mean effect size estimates, despite theoretical and empirical reasons to expect variability across situations. The present study meta‐analytically demonstrates that occupation‐level situational strength is one important source of this variability. Consistent with theory, predicted uncorrected conscientiousness–performance correlations ranged from r = .09 to .23 (overall performance) and r = .06 to .18 (task performance), with stronger correlations observed in weak occupations. These results highlight the need for continued inquiry into the nature of situational strength, its impact on other predictor–outcome relationships, and the implications of these issues vis‐à‐vis theory and practice. Copyright © 2009 John Wiley & Sons, Ltd.     

Life cycle assessment of urban waste management: energy performances and environmental impacts. The case of Rome, Italy

Landfilling is nowadays the most common practice of waste management in Italy in spite of enforced regulations aimed at increasing waste pre-sorting as well as energy and material recovery. In this work we analyse selected alternative scenarios aimed at minimizing the unused material fraction to be delivered to the landfill. The methodological framework of the analysis is the life cycle assessment, in a multi-method form developed by our research team. The approach was applied to the case of municipal solid waste (MSW) management in Rome, with a special focus on energy and material balance, including global and local scale airborne emissions. Results, provided in the form of indices and indicators of efficiency, effectiveness and environmental impacts, point out landfill activities as the worst waste management strategy at a global scale. On the other hand, the investigated waste treatments with energy and material recovery allow important benefits of greenhouse gas emission reduction (among others) but are still affected by non-negligible local emissions. Furthermore, waste treatments leading to energy recovery provide an energy output that, in the best case, is able to meet 15% of the Rome electricity consumption.     

Non-parametric analysis of infrared spectra for recognition of glass and glass ceramic fragments in recycling plants

Glass ceramic detection in glass recycling plants represents a still unsolved problem, as glass ceramic material looks like normal glass and is usually detected only by specialized personnel. The presence of glass-like contaminants inside waste glass products, resulting from both industrial and differentiated urban waste collection, increases process production costs and reduces final product quality. In this paper an innovative approach for glass ceramic recognition, based on the non-parametric analysis of infrared spectra, is proposed and investigated. The work was specifically addressed to the spectral classification of glass and glass ceramic fragments collected in an actual recycling plant from three different production lines: flat glass, colored container-glass and white container-glass. The analyses, carried out in the near and mid-infrared (NIR-MIR) spectral field (1280-4480 nm), show that glass ceramic and glass fragments can be recognized by applying a wavelet transform, with a small classification error. Moreover, a method for selecting only a small subset of relevant wavelength ratios is suggested, allowing the conduct of a fast recognition of the two classes of materials. The results show how the proposed approach can be utilized to develop a classification engine to be integrated inside a hardware and software sorting architecture for fast "on-line" ceramic glass recognition and separation.