Evaluation of Cu potential bioavailability changes upon coastal sediment resuspension: an example on how to improve the assessment of sediment dredging environmental risks

Purpose  

Metal bioavailability-based sediment quality analysis, inferred from geochemical partitioning data, may contribute to improve sediment management policies. This is important because decision-making processes should not give similar priorities to sediments offering contrasting environmental risks associated to metal bioavailability. However, current uses of Sediment Quality Guidelines (SQGs) as interpretive tools to support decisions about dredging-related activities have not considered the changes in metal bioavailability upon sediment resuspension.     

Mechanical,Barrier and Antioxidant Properties of Chitosan Films Incorporating Cinnamaldehyde

Chitosan films (CF) [1 and 2% w/v] alone and with cinnamaldehyde (CNE) [0.25, 0.5 and 1% v/v] were prepared using an emulsion method, and the obtained films were characterized in terms of water vapor permeability (WVP), water solubility and optical, mechanical and antioxidant properties. The incorporation of CNE at 1% (v/v) significantly decreased the water solubility of the film by approximately 4% for the 1 and 2% CF films, whereas the WVP increased (2.5–3.5 times). The incorporation of CNE (0.25 and 0.5%) into 2% CF significantly increased the tensile strength (TS) (62 and 34%, respectively) and the percent elongation (%E) values, 26, 30 and 52% for CF that contained 0.25, 0.5 and 1% CNE, respectively. The largest value of the elasticity modulus (EM) was observed for 2% CF with 0.25% CNE. All films exhibited a yellow appearance (b*), but the CNE content had a marked impact on the coloration of the films. The CNE recoveries of the CF films (1 and 2%) with 1% of CNE were high (43 and 67%). The antioxidant activities indicated that the incorporation of 1% CNE into CF films (1 and 2%) increased the antioxidant activity. The protective effects of the films with and without CNE on erythrocytes were very strong (36–72% hemolysis inhibition). These results suggest there are potential applications for CF-CNE films as active packaging for the preservation of food products.     

Myoelectric manifestation of muscle fatigue in repetitive work detected by means of miniaturized sEMG sensors

Upper limb work-related musculoskeletal disorders have a 12-month prevalence ranging from 12 to 41% worldwide and can be partly caused by handling low loads at high frequency. The association between the myoelectric manifestation of elbow flexor muscle fatigue and occupational physical demand has never been investigated. It was hypothesized that an elbow flexor muscle fatigue index could be a valid risk indicator in handling low loads at high frequency. This study aims to measure the myoelectric manifestation of muscle fatigue of the three elbow flexor muscles during the execution of the work tasks in different risk conditions. Fifteen right-handed healthy adults were screened using a movement analysis laboratory consisting of optoelectronic, dynamometer and surface electromyographic systems. The main result indicates that the fatigue index calculated from the brachioradialis is sensitive to the interaction among risk classes, session and gender, and above all it is sensitive to the risk classes.     

The digital representation of safety systems at “Seveso” plants and its potential for improving risk management

At Seveso plants, duty holders must have a complex system for assessing and managing risks. The pillars of this system are the safety report and the safety management system, with a number of underlying documents. The strength of the system is the high standardization of these documents. Regulations, standard codes and guidelines define content, structure and formats. The weakness is the high complexity. Managers and workers perceive documents as difficult to understand and far from actual operations. Major threats for the credibility of documents (and therefore for the safety systems) come from the continuous organizational and technical changes, which in a short time can make most documents obsolete; as well as by near misses, which continuously show the holes in safety systems. A big effort is required to follow up the plant changes and the near misses. In order to help safety managers, a new software has been developed. At Seveso plants, it has been possible build an integrated digital representation, because all documents are perfectly structured. This representation may be used both for updating the relevant documents after a change and to improve documents after a near miss or an accident. In this way, safety documents are always up to date and trustworthy and the huge knowledge, which is usually hidden inside safety documents, is clearly revealed and revived. The approach is basically “knowledge based” and the intention is to provide safety managers with an easy and simple tool. IRISonLine is a software that has been developed by ISPESL to provide safety managers of “Seveso” establishments with a tool for improving the management of change and of near misses.     

Evaluation of an Exposure Assay to Measure Uptake of Sediment Pah by Fish

The ecological risks of polynuclear aromatic hydrocarbons (PAH) in aquatic sediments will vary with both toxicity and bioavailability to aquatic biota. While there are standardized protocols to test the acute toxicity of sediment-borne compounds to aquatic invertebrates, there are none for assessing bioavailability to fish. We found that sediment-borne PAH caused an exposure-dependent induction of cytochrome P450 (CYP1A) enzymes in rainbow trout (Oncorhynchus mykiss) fingerlings exposed in semi-static 96 h bioassays, as shown by increased activity of ethoxyresorufin-o-deethylase (EROD). Assuming that PAH are taken up by trout due to partitioning from organic and inorganic constituents of sediments, we tested the effect of different test variables on bioaccumulation using induction as an index of exposure. EROD activity increased with exposure of fish to increasing volumes of sediments containing PAH, i.e., with increasing ratios of sediment to water. Uptake of single compounds from sandy sediments did not differ from uptake from clay or low organic (7% LOI — loss on ignition) sediments, but decreased when organic content was very high (58% LOI). Maximum induction was observed within 24~h of exposure and at 7.5^C relative to 15, 22, or 28^C. Storage and handling techniques had minor effects on sediment EROD induction potency. Absolute EROD activity was greater in white sucker (Catostomus commersoni) a benthic species, than in trout, a pelagic species. However, when basal (negative control) activity was accounted for, there was no difference in response between the species. Together, these experiments provide a basis for developing a standard protocol to test the bioavailability to fish of sediment-borne PAH.     

Contamination Levels and Preliminary Assessment of the Technical Feasibility of Employing Natural Attenuation in 5 Priority Areas of Presidente Bernardes Refinery in Cubatão, São Paulo, Brazil

Five priority areas of potential impact by contaminants (API) were investigated at the Presidente Bernardes Refinery in Cubatão, São Paulo, Brazil with the following aims: (i) to identify both organic and inorganic contaminants present in soil and groundwater; (ii) to define the environmental conditions relevant for microbial activity at the site and (iii) to evaluate the feasibility of employing natural attenuation for treatment of the hydrocarbon contamination. One area (API 1) was an uncontrolled landfill, where waste materials from the refinery were deposited between 1954 and 1986, and four areas (API 4, 5, 7 and 11) were located in the operational section of the refinery. Soil contamination by regulated BTEX compounds (benzene, toluene, total xylenes) was restricted to two samples from API 1. Nonregulated ethylbenzene was detected in one soil sample from API 4, one from API 5 and two from API 1. No soil contained regulated PAH above threshold levels. Several nonregulated PAHs were found in 6 soil samples from API 1, 3 soil samples from API 4 and 1 soil sample from API 5. Site soils contained very high aluminium concentrations, but metal contamination was restricted to one soil sample from API 1, which contained nickel above threshold limits. BTEX contamination of groundwater was due mostly to benzene. Of the 17 PAH molecules tested, only naphthalene and 2-methylnaphthalene occurred in groundwater. The sum of total BTEX and total PAH exceeded 200 μg/L in only a few monitoring wells in API 4, 5 and 11 and was always below 2.640 μg/L. Be, Cd, Cr, Cu, Hg, Ni, Se, Ag, Tl and Zn were not detected in groundwater, which was contaminated in a few locations by aluminium (mostly below 1 mg/L), lead (<0.066 mg/L) and arsenic (<0.056 mg/L). S, K, Ca, Mg and Fe were present in groundwater in excess of physiological requirements for microbial growth, but low concentrations of N and P could become growth limiting. However, BTEX were efficiently degraded in saturated and unsaturated zone microcosms and nutrient amendments did not stimulate biodegradation rates measurably. The inorganic carbon pool in groundwater was up to one order of magnitude larger than the organic carbon pool. Total inorganic carbon (TIC) in API groundwater exceeded TIC of clean groundwater by factors of 2 (API 4), 6 (API 5, 7 and 11) or 10 (API 1). Most of the inorganic carbon incorporated into groundwater beneath the refinery originated from biodegradation in the unsaturated soil, which contained a microbiota (10⁶ cells/g on average) capable of growth with most of the pure (benzene, toluene, ethylbenzene and xylene) and mixed hydrocarbons tested (diesel oil, gasoline, naphtha, condensate, aromatic residue and fuel oil). A viscous hydrocarbon paste uncovered in API 1 was insoluble in water but dissolved in dichloromethane. Many organic components of this paste were biodegradable as evidenced by weight reduction of the hydrocarbon paste and by the growth of suspended and attached biomass in saturated zone microcosms, where the paste was the only carbon source. This study indicates that monitored natural attenuation may be a technically feasible and efficient means for plume control in API 1, 4 and 5, provided the plumes in API 4 and 5 are not expanding. This technique is not suitable for contaminant reduction in API 11.     

Directions of Change in Land Cover and Landscape Patterns from 1957 to 2000 in Agricultural Landscapes in NW Spain

The aim of this work is the analysis of the dynamics in cultural landscapes, focused on the spatial distribution of changes in land cover and landscape patterns, and their possible linkages. These dynamics have been analyzed for the years 1957 and 2000 in a sector of the north of Galicia (NW Spain) characterized with diverse landscapes. Afforestation processes linked to agriculture abandonment and forestry specialization were the main processes observed in the study area, with the exception of the southern mountainous sector that was dominated by ploughing of scrubland for conversion into grassland, reflecting a specialization in livestock production. The structural changes that have taken place in most of the study area were related to the heterogeneity aspects, although the mountainous sectors were characterized by changes in heterogeneity and fragmentation. According to the tests performed, the comparison of the spatial distribution of both dynamics showed a certain statistical significance, reflecting the interrelationship between patterns and processes. This approach could be useful for the identification of areas with similar characteristics in terms of spatial dynamics so as to define more effective and targeted landscape planning and management strategies.     

Analysing demand for environmental quality: a willingness to pay/accept study in the province of Siena (Italy)

The province of Siena, Italy, enacted a new garbage plan (NGP) with the objective of increasing separate waste collection (SWC), shutting down six landfills and increasing incineration. The aim of the paper is to evaluate costs and benefits of the NGP. The hypothesis is that willingness to pay (WTP) should reflect the value to the community of having better environmental quality, according to the Contingent Valuation literature. The paper reports the results of a contingent valuation (CV). The sample was divided into two subsets: firms and households. Through the information gathered via a detailed questionnaire, parametric and non-parametric estimates were elaborated to analyse the WTP of the population for the benefits flowing from increased SWC, increased incineration and shutting down of landfills. These values were expressed as a share of the tax actually paid. Although a small subset of firms and households valued increasing incineration less positively, requesting compensation, on the whole interviewees (with large differences between firms and households) had a net positive WTP for the provisions included in NGP. Parametric estimation procedures enabled us to analyse the economic as well as social and demographic factors affecting these results. These elements are useful for computing a value for the waste charge that also reflects external effects. Finally, we estimated household income elasticity of WTP for the increase in SWC and found less than one: environmental quality is not a luxury good.     

Prediction of lichen diversity in an UNESCO biosphere reserve – correlation of high resolution remote sensing data with field samples

The present study focuses on developing models to predict lichen species richness in a UNESCO Biosphere Reserve of the Swiss Pre-Alps following a gradient of land-use intensity combining remote sensing data and regression models. The predictive power of the models and the obtained r ranging from 0.5 for lichens on soil to 0.8 for lichens on trees can be regarded as satisfactory to good, respectively. The study revealed that a combination of airborne and spaceborne remote sensing data produced a variety of ecological meaningful variables.