Effect of calcium and magnesium on copper,cadmium, and some essential elements of Indian major carps Labeo rohita (Hamilton) and Catla catla (Hamilton) treated with copper and cadmium

The effect of calcium and magnesium either singly or in combination on accumulation of cadmium and copper in Labeo rohita (rohu) and Catla catla (catla) was investigated in this study under laboratory conditions. The investigation showed that copper accumulation in rohu exposed to 0.25 mg L^?1 of copper for 14 days reduced from 31.0 ± 0.4 mg kg^?1 at no calcium/magnesium treatment to 3.5 ± 0.2 and 2.2 ± 0.1 mg kg^?1, respectively, at 75 mg L^?1 calcium or magnesium treatment. The copper level in catla exposed to 0.20 mg L^?1 of copper for 14 days reduced from 5.7 ± 0.1 mg kg^?1 at no calcium/magnesium treatment to 3.4 ± 0.2 and 3.3 ± 0.1 mg kg^?1, respectively, at 300 mg L^?1 calcium or magnesium treatment. The cadmium accumulation in rohu exposed to 0.20 mg L^?1 of cadmium for 14 days reduced from 1.7 ± 0.1 mg kg^?1 at no magnesium treatment to 1.4 ± 0.1 mg kg^?1 at 120 mg L^?1 magnesium treatment. The cadmium accumulation in catla exposed to 0.20 mg L^?1 of cadmium for 14 days reduced from 0.8 ± 0.2 mg kg^?1 at no magnesium treatment to 0.6 ± 0.2 mg kg^?1 at 80 mg L^?1 magnesium treatment. Copper and cadmium treatments also reduced some essential microelements of rohu and catla. Both the fishes restored these elements at different levels of calcium and magnesium.     

Sustainable Waste Management of Engineering Plastics Generated from E-Waste: A Critical Evaluation of Mechanical,Thermal and Morphological Properties

Journal of Polymers and the Environment - The major roadblock for recycling of waste electrical and electronic equipments (WEEE) depends on the viability of sorting process, which is a complex...     

Novel Biobased Polyurethanes Synthesized from Soybean Phosphate Ester Polyols: Thermomechanical Properties Evaluations

Biobased polyurethanes from soybean oil–derived polyols and polymeric diphenylmethane diisocyanate (pMDI) are prepared and their thermomechanical properties are studied and evaluated. The cross-linked biobased polyurethanes being prepared from soy phosphate ester polyols with hydroxyl contents ranging from 122 to 145 mg KOH/g and pMDI within 5 min of reaction time at 150°C in absence of any catalyst show cross-linking densities ranging from 1.8 × 10³ to 3.0 × 10³ M/m³, whereas glass transition temperatures vary from approximately 69 to 82°C. The loss factor (tan ) curves show single peaks for all these biobased polyurethanes, thus indicating a single-phase system. The storage moduli (G) at 30°C range from 4 × 10⁸ to 1.3 × 10⁹ Pa. Upon postcure at 150°C, the thermomechanical properties can be optimized. Cross-link densities are improved significantly for hydroxyl content of 139 and 145 mg KOH/g at curing time of 24 h. Similarly, glass transition temperature (T_g) and storage moduli around and after T_g are increased. Meanwhile, tan intensities decrease as result of restricted chain mobility. Longer exposure time (24 h) induces thermal degradation, as evidenced by thermogravimetric analysis (TGA). The dynamic mechanical (DMA) analysis shows that postcure at 100°C for times exceeding 24 h also leads to improved properties. However, cross-linking densities are lower compared to postcure carried out at 150°C.     

亚洲高能效和环境无害的工业技术部分Ⅰ:技术方案的经济可行性评价

本文描述中国、印度、菲律宾和斯里兰卡能源密集和污染型工业中可以引进的一些技术变革.当选择一种新的高能效和环境无害的工业技术时需要考虑的因素中包括现行技术的状态、前期费用、运行费用、设备效率、企业内部可供利用的技能水平.为了确认一种新技术是经济上可行的,也需要考虑许多外部因素:合理能源定价的存在,是否有适用的环境法规和激励机制到位,总体金融环境,经济体系的透明度等.部分Ⅱ将在下一期刊登.     

Degradation Study of Biobased Polyester–Polyurethane and its Nanocomposite Under Natural Soil Burial,UV Radiation and Hydrolytic-Salt Water Circumstances

The current study focuses on the development of a formulation of polyester polyurethane (PEPU) samples using castor oil (CO) modified polyester polyol and partially biobased aliphatic isocyanate. The CO modified polyester polyol was synthesized employing transesterification reaction between CO and diethylene glycol in the presence litharge (PbO) catalyst. Subsequently, the modification of CO was confirmed using proton nuclear magnetic resonance (¹HNMR) spectra analysis. In the next stage, the biobased polyester polyurethane nanocomposites (PEPUNC) were prepared by incorporating 3 wt% OMMT nanoclay within PEPU through in situ polymerization technique. The produced PEPU was confirmed by Fourier transform infrared spectroscopy (FTIR) and ¹HNMR spectra analysis. Further, the degradation properties of developed PEPU subjected to soil-burial, UV exposure and hydrolytic-salt water medium were noted by FTIR spectroscopy. Corresponding weight loss, mechanical measurements and morphological studies through scanning electron microscopy (SEM) analysis were studied. The results showed that the addition of OMMT nanoclay within the PEPU matrix produces significant improvement in the degradation rate which indicated the susceptibility of OMMT nanoclay to humidity upon exposure to soil burial. The produced microorganisms from the soil resulted in significant chemical and morphological changes in the entire structure of the PEPU. Additionally, the highest degradation and percentage of weight loss was observed under soil burial as compared to UV exposure and hydrolytic-salt water medium.     

Bio-concentration of chromium—an <Emphasis Type="Italic">in situ</Emphasis> phytoremediation study at South Kaliapani chromite mining area of Orissa,India

Mine waste water at South Kaliapani usually contains toxic levels of hexavalent Cr(VI). The present in situ study was conducted at South Kaliapani chromite mine area in Orissa state, India, to assess the phytoremediation ability of three plants, namely, rice (Oryza sativa L.), paragrass (Brachiaria mutica), and an aquatic weed (Eichhornia crassipes), in attenuating Cr(VI) from mine waste water and to correlate the bio-concentration factors (BCF) of Cr. Water hyacinth (E. crassipes) showed 24% to 54% reduction whereas paragrass (B. mutica) was able to reduce 18% to 33% of Cr(VI) from mine water. This reduction was studied over a period of 100 days of plant growth. The reduction was observed through a passage of a sum total of 2,000 sq. ft. cultivated plots and ponds separately. Reduction in Cr(VI) content in mine water varies with plant age as well as with the distance of passage. Cr accumulation and BCF values increased with high soil Cr levels as well as the age of plants. High BCF and transportation index (Ti) values, i.e., 10,924 and 32.09, respectively, were noted for water hyacinth. The Ti values indicated that the root-to-shoot translocation of Cr was very high after 100 days of growth. The total accumulation rate was maximum (8.29 mg Cr kg dry biomass^− 1 day ^− 1) in paragrass. The BCF values for roots were noted to be higher than those of leaves, stems, and grains of the 125-day-old plants. Hence, paragrass and water hyacinth may be used as tools of phytoremediation to combat the problem of in situ Cr contamination.     

Abundance pattern of wedge clam Donax cuneatus (L.) in different spatial scale in the vicinity of a coastal nuclear power plant

Impact of thermal discharge from a coastal power station (Madras Atomic Power Station, southeast coast of India) on the spatial variability of Donax cuneatus abundance was assessed to determine the impact boundary. Totally, 20 sites were selected both on south and north side in increasing spatial scale from mixing zone, 12 locations were selected toward south side at a distance from 0 (near mixing point) to 2,000 m and eight location were selected toward north from the effluent mixing zone. Mean water temperature along the coast ranged from 29.1 ±0.15°C to 31.2 ± 0.15°C. Total organic carbon content in the sediment ranged from 0.27% to 0.70%. D. cuneatus population on the swash zone was ranged between 1.3 ± 1.5 and 88.3 ± 9.6 m^???2. Meager population of wedge clam was observed up to 100 m (S100) south from mixing point and abundance gradually increased in different spatial scale. Comparatively high abundance was observed from S400 and reached maximum at S1000 (64.0 ± 3.6 m^???2). Similar pattern was observed on north side too but less abundance was observed only up to 80 m (N80). Maximum abundance was observed at control location C3-N500 (88.3 ± 9.6 m^???2). Forty meters on either side of discharge point was highly impacted, 80 to 100 m toward plume flow (south) was moderately impacted, and 80 m north of mixing point also witnessed moderate impact. After 100 m (N100), north was not affected by effluents, whereas between 100 and 400 m, south was influenced slightly. Multivariate clustering pattern on the environmental variables of all sampling locations and population trend of D. cuneatus at those stations showed similarity. Present investigation unambiguously showed that the abundance pattern of D. cuneatus on the sandy beach of east coast of Kalpakkam is not governed by single major factor but due to the result of multiple interacting factors. The population size of the wedge clam with reference to the effect of power plant effluents and other features of habitats of the beach ecosystem are also discussed.     

Physico-chemical assessment of paper mill effluent and its heavy metal remediation using aquatic macrophytes—a case study at JK Paper mill, Rayagada, India

The present investigation aims to assess the phytoremediation potential of six aquatic macrophytes, viz. Eichhornia crassipes, Hydrilla verticillata, Jussiaea repens, Lemna minor, Pistia stratiotes and Trapa natans grown in paper mill effluent of JK Paper mill of Rayagada, Orissa, for remediation of heavy metals. The experiment was designed in pot culture experiments. Assessment of physico-chemical parameters of paper mill effluent showed significant decrease in pH, conductivity, total dissolved solids, total suspended solids, chlorine, sulphur, biological and chemical oxygen demand after growth of macrophytes for 20 days. Phytoremediation ability of these aquatic macrophytic species for copper (Cu) and mercury (Hg) was indicated by assessing the decrease in the levels of heavy metals from effluent water. Maximum reduction (66.5 %) in Hg content of untreated paper mill effluent was observed using L. minor followed by T. natans (64.8 %). L. minor showed highest reduction (71.4 %) of Cu content from effluent water followed by E. crassipes (63.6 %). Phytoextraction potential of L. minor was remarkable for Hg and Cu, and bioaccumulation was evident from bioconcentration factor values, i.e. 0.59 and 0.70, respectively. The present phytoremediation approach was considered more effective than conventional chemical treatment method for removing toxic contaminants from paper mill effluent.     

Nutrient dynamics and seasonal variation of phytoplankton assemblages in the coastal waters of southwest Bay of Bengal

In order to understand the phytoplankton community structure and its relationship with the environmental variables in the near shore waters of Kalpakkam, east coast of India, observations were carried out during 2008–2009. Phytoplankton population was comprised of 219 species, and the density was higher during the southwest monsoon (SWM) and inter-monsoon seasons than that of north east monsoon (NEM) season. The nutrient status on a temporal and spatial scale indicated the impact of point sources carrying anthropogenic runoff. Comparison of ambient nutrient ratios with the Redfield ratio (N/P/Si?=?16:1:16) showed a clear temporal variation in the factors that regulate the phytoplankton growth. SWM and inter-monsoon season was evident to have an acute N-limitation of algal growth (~76 %) whereas P-limitation was encountered during the NEM season (~75 %). Interestingly, a sizable population of cyanobacteria (Trichodesmium erythraeum) were noticed during NEM season when there was an exponential increase in nitrogen concentration, probably due to nitrogen fixation. No significant impact of temperature on phytoplankton proliferation was observed in situ during the study period.