Haematological and biochemical effects of polyphenolics in animal models

Polyphenols of natural and synthetic origin are exploited in tanning sector to convert putrescible skin/hide to non-putrescible leather. However, only 30-40% of the inputs have been taken up for processing, the remaining is released as unspent. The existing conventional wastewater treatment systems are inefficient in removing or degrading these unspent polyphenols and thus detrimental to ecosystem. The present study demonstrates the evaluation of impact of both synthetic and natural polyphenols on biochemical and haematological properties of blood and serum in animal models. The results reveal that concentrations of polyphenols play a major role. At higher concentrations, irrespective of their nature, there was a marked change in the lipid profile (81% reduction), followed by insignificant change in glucose levels, RBC and WBC counts and other haematological parameters. At lower concentrations, no significant changes in the above said properties were observed.     

Chloramphenicol influence on antioxidant enzymes with preliminary approach on microsomal CYP1A immunopositive-protein in Chamelea gallina

Chloramphenicol (CA) is a largely used antibiotic and it is an inhibitor of protein synthesis that also induces ROS production. In this work there were investigated activities and expressions in the Adriatic bivalve Chamelea gallina of some antioxidant and detoxification proteins like superoxide dismutase (Mn-SOD, Cu/Zn-SOD), catalase (CAT) and Cytochrome P450 (CYP1A). Clams exposed to 5mgl(-1) of chloramphenicol were sampled 2, 4 and 8 days after treatment (CA2, CA4 and CA8). SODs, CAT, and CYP1A activity and/or expression were detected in pooled digestive glands by Western blotting and by spectrophotometrical analysis. Enzymes activities increase during the entire antibiotic exposure. With respect to the control Cu/Zn-SOD expression increases, while Mn-SOD expression decreases significantly after 4 days. Two CYP1A immunopositive-proteins (57.7 and 59.8kDa) were detected. The lower band significantly decreases in CA8, the upper one also in CA4 condition. High levels of Mn-SOD, CAT activity and Cu/Zn-SOD expression, indicate intense ROS production while Mn-SOD expression inhibition might be ascribable to mitochondrial alterations due to CA and indirectly to ROS. CYP1A1 action determines H(2)O(2) production that would contribute to a CYP1A1 gene promoter down regulation, a response to oxidative stress with the antioxidant enzymes activation as a final result. This study highlights the close association, in C. gallina, in presence of chloramphenicol, between SOD/CAT and CYP system, and it appear particularly interesting to the lack of similar researches on mollusc species.     

Mercury sorption to sediments: dependence on grain size, dissolved organic carbon, and suspended bacteria

A combination of laboratory scale derived correlations and measurements of grain size distribution, DOC (dissolved organic carbon) concentration, and density of suspended bacteria promises to be useful in estimating Hg(II) sorption in heterogeneous streambeds and groundwater environments. This was found by shaking intact sediment and fractions thereof (<63-2000mum) with solutions of HgCl(2) (1.0-10.0ngml(-1)). The intact sediment was also shaken with the Hg(II) solutions separately in presence of DOC (6.5-90.2mugml(-1)) or brought in contact with suspensions of a strain of groundwater bacteria (2x10(4)-2x10(6)cellsml(-1)). Hg(II) sorption was rather weak and positively correlated with the grain size, and the sorption coefficient (K(d)) varied between about 300 and 600mlg(-1). By using the relative surface areas of the fractions, K(d) for the intact sediment was back calculated with 2% deviation. K(d) was negatively correlated with the concentration of DOC and positively correlated with the number of bacteria. A multiple regression showed that K(d) was significantly more influenced by the number of bacteria than by the grain size. The findings imply that common DOC concentrations in groundwater and streambeds, 5-20mugml(-1), will halve the K(d) obtained from standard sorption assays of Hg(II), and that K(d) will almost double when the cell numbers are doubled at densities that are common in aquifers. The findings suggest that simultaneous measurements of surface areas of sediment particles, DOC concentrations, and bacterial numbers are useful to predict spatial variation of Hg(II) sorption in aquifers and sandy sediments.     

Assessment of heavy metals phytotoxicity using seed germination and root elongation tests: a comparison of two growth substrates

Seed germination and root elongation test is used to evaluate hazardous waste sites and to assess toxicity of organic and inorganic compounds. Paper substrate, especially circular filter paper placed inside a Petri dish has long been used for this test. Same reports indicate that filter paper might interfere with the toxicity of inorganic substances, especially metal cations. This study evaluate toxicity of Cd, Pb, Ni, Cu on lettuce, broccoli, tomato and radish seed using two bed material: agar and filter paper. The results show that percent germination is not affected by substrates; vice versa, as for root elongation, the test in agar showed to be more sensible than that the one on filter paper. The radical growth inhibition depends on the metal, on the tested concentration and on the species; among the tested metals, cadmium was the one determining the highest toxic effects on different species and lettuce was the plant that suffered more. From the comparison, it is clearly evident the greater sensibility of the test in agar; on the other hand, the lower sensibility of the test on the filter paper might be caused by the partial and not homogeneous exposition of the root to metal cations.     

Biodegradability of biodegradable/degradable plastic materials under aerobic and anaerobic conditions

A study was conducted on two types of plastic materials, Mater-Bi Novamont (MB) and Environmental Product Inc. (EPI), to assess their biodegradability under aerobic and anaerobic conditions. For aerobic conditions, organic fractions of municipal solid wastes were composted. For the anaerobic process, anaerobic inoculum from a wastewater treatment plant was used. Cellulose filter papers (CFP) were used as a positive control for both mediums. The composting process was monitored in terms of temperature, moisture and volatile solids and the biodegradation of the samples were monitored in terms of mass loss. Monitoring results showed a biodegradation of 27.1% on a dry basis for MB plastic within a period of 72 days of composting. Biodegradability under an anaerobic environment was monitored in terms of biogas production. A cumulative methane gas production of 245ml was obtained for MB, which showed good degradation as compared to CFP (246.8ml). However, EPI plastic showed a cumulative methane value of 7.6ml for a period of 32 days, which was close to the blank (4.0ml). The EPI plastic did not biodegrade under either condition. The cumulative carbon dioxide evolution after 32 days was as follows: CFP 4.406cm(3), MB 2.198cm(3) and EPI 1.328cm(3). The cumulative level of CO(2) varying with time fitted sigmoid type curves with R(2) values of 0.996, 0.996 and 0.995 for CFP, MB and EPI, respectively.     

Removal of insoluble chloride from bottom ash for recycling

In order to recycle bottom ash and use it as raw material for cement production, the removal of insoluble chloride was investigated by testing various washing techniques. The present work is also focused on investigating the properties of insoluble chlorides and determining the conditions for dissolving these compounds in order to reduce the chlorine content to the required level, i.e., less than 0.1 wt%. Within this framework, the effect of washing with water and CO2 bubbling was investigated, because the main insoluble chloride found in bottom ash, i.e., Friedel's salt, can be dissolved by CO2. Then, in order to better understand the removal of Cl, Friedel's salt was artificially synthesized by hydration and then the effect of CO2 bubbling was investigated. If all chlorides in the ash are converted into Friedel's salt by hydration, all chlorides can then be dissolved by CO2 bubbling. In addition, the effect of pH on removing the remaining insoluble chlorides was investigated by washing the ash with sulfuric acid solution. It was found that the most effective technique to reduce the Cl content to less than 1000 ppm was washing with sulfuric acid solution, while keeping the pH value at less than 4. By using this method, Friedel's salt and other insoluble chlorides were dissolved.     

Formulating an effective higher education curriculum for the Australian waste management sector

This paper reviews and discusses the current literature relating to the drivers and barriers for a successful waste management curriculum at higher education level. The intention is to use this review to advise educational standards within the tertiary education sector so as to meet industry requirements. The paper presents a review of the UK's system for education and training within the waste management sector over the past decade, and discusses in what ways this approach could be successfully applied to the Australian sector. The paper concludes with a rationale for current research being undertaken within Australia, which seeks to identify which curriculum and pedagogic approaches are best suited for developing the skills of effective waste management practitioners both within the industry and for those graduating from higher education. The case made is that there is an absence of clear standards, educational provisions and certification for this growing industry within Australia, which inhibits the development of an effective waste management sector.     

Perspectives and limits for cement kilns as a destination for RDF

RDF, the high calorific value fraction of MSW obtained by conventional separation systems, can be employed in technological plants (mainly cement kilns) in order to obtain a useful energy recovery. It is interesting and important to evaluate this possibility within the general framework of waste-to-energy solutions. The solution must be assessed on the basis of different aspects, namely: technological features and clinker characteristics; local atmospheric pollution; the effects of RDF used in cement kilns on the generation of greenhouse gases; the economics of conventional solid fuels substitution and planning perspectives, from the point of view of the destination of RDF and optimal cement kiln policy. The different experiences of this issue throughout Europe are reviewed, and some applications within Italy are also been considered. The main findings of the study are that the use of RDF in cement kilns instead of coal or coke offers environmental benefits in terms of greenhouse gases, while the formation of conventional gaseous pollutants is not a critical aspect. Indeed, the generation of nitrogen oxides can probably be lower because of lower flame temperatures or lower air excess. The presence of chlorinated micro-pollutants is not influenced by the presence of RDF in fuel, whereas depending on the quality of the RDF, some problems could arise compared to the substituted fuel as far as heavy metals are concerned, chiefly the more volatile ones.     

Blends of HDPE wastes: study of the properties

In this work we have analysed the properties of blends of recycled high-density polyethylene (HDPE) filled with talc. We have used two kinds of polymer matrices. The first one came entirely from ground injection moulded parts whereas the second was bimodal, incorporating 80% of the previous HDPE and 20% of recycled HDPE coming from bottles. We have also used two kinds of commercial talc characterized by a medium particle size of 2 microm and 10 microm, respectively. The amount of talc added to both matrices weighed of 10% and 20%. With regards to the mechanical properties of the analysed composites, greater values of Young's modulus and break stresses were found using a smaller particle size and higher talc content. On the other hand, the combination of the two HDPEs with very different viscosities produced a notable increase in the strain at break and in the absorbed energy; both measured at high and low strain rates. Despite the differences in viscosities between the two HDPEs, we did not observe separation of phases during either the processing or testing. Under impact loading, the higher energy absorption in the composites was observed when the finest talc grade with a 10% content weight was added to the bimodal matrix.