Polylactide (PLA)—Halloysite Nanocomposites: Production, Morphology and Key-Properties

To evaluate the potential of halloysite nanotubes (HNT) as nanofiller for polylactide (PLA), various nanocomposites have been successfully produced by melt-blending the polyester matrix with HNT (HNT(QM)). HNT were also surface treated by silanization reaction with 3-(Trimethoxysilyl) propyl methacrylate (TMSPM). The morphology, thermal, tensile and impact strength properties of the nanocomposites containing 3?C12?% HNT were evaluated and compared to those of pristine (unfilled) PLA. The nanocomposites were characterized by higher rigidity (with Young??s modulus increasing with HNT loading), higher tensile strength (about 70?MPa at 6?% HNT(QM)), whereas the elongation at break and impact strength did not decrease. As demonstrated under dynamic solicitation (DMA), melt-blending PLA with HNT led to enhancement of storage modulus (E??) and offers the possibility to use PLA in applications requiring higher temperatures of utilization. However, with few exceptions, TGA and DSC measurements did not reveal important changes of thermal parameters. The surface silanization treatment proved to improve the quality of the nanofiller dispersion even at higher loading. As a result, good thermal stability associated to high tensile strength, and noticeable increases in impact properties were recorded. Furthermore, enhanced nucleating ability and crystallization kinetics of the PLA matrix were revealed as specific characteristics.     

Silver and thallium historical trends in the Seine River basin

Records on pollution by metals of minor economic importance (e.g. silver and thallium) but which prove to be toxic are rarely documented in river sediment. This study used two sediment cores collected downstream of the Seine River to describe the temporal evolution of Ag and Tl concentrations in an urban catchment. Radionuclide analysis (i.e. Cs-137 and Pb-210) allowed dating sediment deposition within the cores (1933-2003). Ag concentration reached maximum values of 14.3-24.6 mg kg(-1) in the 1960s and 1970s, before gradually decreasing up to values which approximated 4 mg kg(-1) in 2003. In contrast, Tl concentrations remained roughly constant throughout the core (median value of 0.86 mg kg(-1)). Suspended solids was collected at upstream locations in the catchment to derive the background concentrations in Ag and Tl. Very high Ag concentrations were measured in the upstream Seine River sites (0.33-0.59 mg kg(-1)), compared to the values reported in the literature (0.055 mg kg(-1)). This suggests the presence of a widespread and ancient Ag pollution in the Seine River basin, as demonstrated by the very high Ag enrichment ratios recorded in the cores. Annual flux of particulate Ag in the Seine River was estimated at 1.7 t yr(-1) in 2003. In contrast, Tl concentrations remained in the same order of magnitude as the natural background signal (0.3-0.5 mg kg(-1)). This study suggests that the Seine River basin is free of Tl contamination. Future concerns should hence mostly rely on Ag contamination, in a context of increasing Ag uses and possible releases to the environment.     

Coupling occurs before breakdown during biotransformation of Acid Blue 62 by white rot fungi

Only few data exist on the metabolites produced during the biotransformation of anthraquinonic dyes by white rot fungi (WRF). During the biotransformation of an anthraquinonic dye Acid Blue 62 (ABu62) using Pycnoporus sanguineus MUCL 41582 strain, it was previously demonstrated that the blue colour of the medium turned to red before complete dye decolourisation. To better understand the phenomenon, this study carried out ABu62 biotransformation with five different WRF strains (Coriolopsis polyzona MUCL 38443, Perenniporia ochroleuca MUCL 41114, Perenniporia tephropora MUCL 41562, P. sanguineus MUCL 38531 and Trametes versicolor MUCL 38412) and compared with P. sanguineus MUCL 41582 previously described. A multi-methodological approach (using capillary electrophoresis, mass spectrometry, HPLC, UV, NMR and IR spectroscopies) was developed to characterise the metabolites involved and monitor their apparition. Seven metabolites were commonly found with all strains, suggesting a common metabolic pathway for ABu62 biotransformation. During the first days, dimer and oligomers of the initial ABu62 molecule were observed: the main one absorbed in the 500nm region, explaining the red colour appearance of the medium. This main metabolite was made up of two molecules of ABu62 linked by an azo bond, minus a cyclohexyl moiety. After a longer incubation time, breakdown products were observed. Based on these products characterizations, a bioconversion pathway was proposed.     

Phytoremediation as a management option for contaminated sediments in tidal marshes, flood control areas and dredged sediment landfill sites

Background, aim and scope  

Polluted sediments in rivers may be transported by the river to the sea, spread over river banks and tidal marshes or managed, i.e. actively dredged and disposed of on land. Once sedimented on tidal marshes, alluvial areas or control flood areas, the polluted sediments enter semi-terrestrial ecosystems or agro-ecosystems and may pose a risk. Disposal of polluted dredged sediments on land may also lead to certain risks. Up to a few years ago, contaminated dredged sediments were placed in confined disposal facilities. The European policy encourages sediment valorisation and this will be a technological challenge for the near future. Currently, contaminated dredged sediments are often not valorisable due to their high content of contaminants and their consequent hazardous properties. In addition, it is generally admitted that treatment and re-use of heavily contaminated dredged sediments is not a cost-effective alternative to confined disposal. For contaminated sediments and associated disposal facilities used in the past, a realistic, low cost, safe, ecologically sound and sustainable management option is required. In this context, phytoremediation is proposed in the literature as a management option. The aim of this paper is to review the current knowledge on management, (phyto)remediation and associated risks in the particular case of sediments contaminated with organic and inorganic pollutants.     

Atmospheric trace element concentrations in total suspended particles near Paris,France

To evaluate today’s trace element atmospheric concentrations in large urban areas, an atmospheric survey was carried out for 18 months, from March 2002 to September 2003, in Saclay, nearby Paris. The total suspended particulate matter (TSP) was collected continuously on quartz fibre filters. The TSP contents were determined for 36 elements (including Ag, Bi, Mo and Sb) using two analytical methods: Instrumental Neutron Activation Analysis (INAA) and Inductively Coupled Plasma Mass Spectrometry (ICP-MS). The measured concentrations were in agreement within the uncertainties with the certified values for the polycarbonate reference material filter SRM-2783 (National Institute for Standard Technology NIST, USA). The measured concentrations were significantly lower than the recommended atmospheric concentrations. In 2003, the Pb atmospheric level at Saclay was 15 ng/m³, compared to the 500 ng/m³ guideline level and to the 200 ng/m³ observed value in 1994. The typical urban background TSP values of 1–2, 0.2–1, 4–6, 10–30 and 3–5 ng/m³ for As, Co, Cr, Cu and Sb, respectively, were inferred from this study and were compared with the literature data. The typical urban background TSP concentrations could not be realised for Cd, Pb and Zn, since these air concentrations are highly influenced by local features. The Zn concentrations and Zn/Pb ratio observed in Saclay represented a characteristic fingerprint of the exceptionally large extent of zinc-made roofs in Paris and its suburbs. The traffic-related origin of Ba, Cr, Cu, Pb and Sb was demonstrated, while the atmospheric source(s) of Ag was not identified.     

Guiding principles for rewilding

There has been much recent interest in the concept of rewilding as a tool for nature conservation, but also confusion over the idea, which has limited its utility. We developed a unifying definition and 10 guiding principles for rewilding through a survey of 59 rewilding experts, a summary of key organizations’ rewilding visions, and workshops involving over 100 participants from around the world. The guiding principles convey that rewilding exits on a continuum of scale, connectivity, and level of human influence and aims to restore ecosystem structure and functions to achieve a self-sustaining autonomous nature. These principles clarify the concept of rewilding and improve its effectiveness as a tool to achieve global conservation targets, including those of the UN Decade on Ecosystem Restoration and post-2020 Global Biodiversity Framework. Finally, we suggest differences in rewilding perspectives lie largely in the extent to which it is seen as achievable and in specific interventions. An understanding of the context of rewilding projects is the key to success, and careful site-specific interpretations will help achieve the aims of rewilding.     

The anthropogenic atmospheric elements fraction: A new interpretation of elemental deposits on tree barks

The superficial deposit on the bark surface of several trees (mainly Fraxinus excelsior L.) was sampled in the experimental station of the university campus in Grenoble (France). Its composition was studied by scanning electron microscopy–energy dispersive X-ray emission (SEM–EDX) and, after digestion, by inductively coupled plasma-mass spectrometry (ICP-MS). The deposit was composed of 81.3% ± 7.4 organic matter, 9.4% ± 4.9 of geogenic minerals issued from the atmosphere (atmospheric geogenic fraction: AGF) and 9.3% ± 2.7 of a mixture of elements which was called anthropogenic atmospheric elements fraction (AAEF). The SEM–EDX analysis showed the presence of particles of geogenic compounds such as different types of silicates, phosphates, carbonates, sulphates, oxides and also particles of metals such as iron or of alloys of Fe–Zn, Fe–Ni, Ni–Cr and Ca sulphates or phosphates. Typical spheres of “fly ashes” composed of pure iron or Al-silicates were detected. Using the SEM–EDX analysis of the deposit and the average local soil composition, an empiric formula for the AGF (without polluting elements) was chosen, which presented a clear analogy with the global formula of the upper continental crust. In the same way, a formula for the pure organic matter fraction was chosen. Withdrawing the elements corresponding to these two fractions allows a tentative estimation of the content of the AAEF which was supposed to better represent the elemental anthropogenic contamination issued from the atmosphere. In the station, most of Sb, Cd, Sn, Pb, Cu, V and Zn were found in the AAEF. This AAEF composition was compared to that of the deposit in a highway tunnel where Pb and Cu were at a very high level. The meaning and the limits of the AAEF concept were critically discussed.     

Combining polar organic chemical integrative samplers (POCIS) with toxicity testing to evaluate pesticide mixture effects on natural phototrophic biofilms

Polar organic chemical integrative samplers (POCIS) are valuable tools in passive sampling methods for monitoring polar organic pesticides in freshwaters. Pesticides extracted from the environment using such methods can be used to toxicity tests. This study evaluated the acute effects of POCIS extracts on natural phototrophic biofilm communities. Our results demonstrate an effect of POCIS pesticide mixtures on chlorophyll a fluorescence, photosynthetic efficiency and community structure. Nevertheless, the range of biofilm responses differs according to origin of the biofilms tested, revealing spatial variations in the sensitivity of natural communities in the studied stream. Combining passive sampler extracts with community-level toxicity tests offers promising perspectives for ecological risk assessment.     

Groundwater quality assessment of one former industrial site in Belgium using a TRIAD-like approach

Contaminated industrial sites are important sources of pollution and may result in ecotoxicological effects on terrestrial, aquatic and groundwater ecosystems. An effect-based approach to evaluate and assess pollution-induced degradation due to contaminated groundwater was carried out in this study. The new concept, referred to as “Groundwater Quality TRIAD-like” (GwQT) approach, is adapted from classical TRIAD approaches. GwQT is based on measurements of chemical concentrations, laboratory toxicity tests and physico-chemical analyses. These components are combined in the GwQT using qualitative and quantitative (using zero to one subindices) integration approaches. The TRIAD approach is applied for the first time on groundwater from one former industrial site located in Belgium. This approach will allow the classification of sites into categories according to the degree of contaminant-induced degradation. This new concept is a starting point for groundwater characterization and is open for improvement and adjustment.