Trace elements in size-segregated urban aerosol in relation to the anthropogenic emission sources and the resuspension

Size segregated particulate samples of atmospheric aerosols in urban site of continental part of Balkans were collected during 6 months in 2008. Six stages impactor in the size ranges: Dp?≤?0.49 μm, 0.49?2?≈?30 %) followed by traffic (PC2, σ²?≈?20 %) that are together contributing around 50 % of elements in the investigated urban aerosol. The EF model shows that major origin of Cd, K, V, Ni, Cu, Pb, Zn, and As in the fine mode is from the anthropogenic sources while increase of their contents in the coarse particles indicates their deposition from the atmosphere and soil contamination. This approach is useful for the assessment of the local resuspension influence on element’s contents in the aerosol and also for the evaluation of the historical pollution of soil caused by deposition of metals from the atmosphere.     

The impact of organic cotton use and consumer habits in the sustainability of jean production using the LCA approach

Environmental Science and Pollution Research - Due to the rise in clothing consumption per person and growing consumer awareness of environmental issues with products, the textile industry must...     

我国重金属环境标准发展对策

我国重金属污染严重,研究制定严格的环境标准是从源头解决重金属污染的根本所在。本文在综合国内外重金属标准的制定情况基础上,研究提出：强化环境标准,确立保障人体健康的核心地位;要综合考虑重金属排放标准与环境质量标准的协同;强化重金属环境基准的研究,提高环境标准的可达性。     

青藏高原产业发展前景探讨

论文通过对青藏高原产业发展历史与现状的分析 ,提出高原产业调整与增长应立足资源优势 ,以重点地区资源开发基地建设为主要方向 ,确立21世纪的高原产业发展战略 ,并相应提出了主要产业调整与发展方向 ,主要包括建立以“大粮食”为核心的大农业产业体系 ,建立各具特色的能源、矿产资源开发基地 ,全力将旅游业培育成高原的支柱产业 ,加快基础设施与中心城镇的建设步伐。资源开发与区域发展的重点地区主要包括河湟谷地、柴达木盆地、藏南谷地和川滇藏接壤地区。     

Review of efficiencies of cogeneration units using internal combustion engines

The most frequently used technology in cogeneration units up to 10 MWe are internal combustion engines and the majority of the models are up to 500 kWe. There are dozens of reciprocating internal combustion engine–based cogeneration unit manufacturers and more than hundred suppliers in the market. In the article, data from supplier technical specifications of 583 units (34 manufacturers) is collected and analyzed. The authors proposed mathematical relations that show dependence of efficiencies on electric power that can be used for initial feasibility studies. Authors also have showed that value of 0.75 for power-to-heat ratio (proposed by EU Directive 2004/8/EC) does not always correspond to current market situation.     

Merits of ozonation and catalytic ozonation pre-treatment in the algal treatment of pulp and paper mill effluents

Since the performance of algal treatment for pulp mill effluent decreases with increasing color intensity and AOX content, which mainly originate from the chlorine bleaching of Kraft pulp, the separated CEH bleaching effluent was pre-treated by both the conventional and the heterogeneous catalytic ozonation processes. An increase in the BOD(5)/COD ratio from 0.11 to 0.28 and 87% color abatement in terms of Pt-Co were achieved by catalytic ozonation, which had the best treatment performance. Biodegradability enhancement of the CEH effluent correlated well with a decrease in toxicity, high-molecular-weight-compound content, and AOX abatement. By the pre-treatment of the CEH bleaching effluent, the overall efficiencies of algal treatment of the combined pulp mill effluent in terms of the fractional removal of COD and color were increased from 76% and 53% to 86-90% and 96-99%, respectively. Effects of both the conventional and the catalytic ozonation pre-treatments on subsequent biological treatment were close to each other and they reduced the filling period of the Sequential Batch Reactor (SBR) cycle from 8 to 5 days.     

Investigation of organic nitrogen and carbon removal in the aerobic digestion of various sludges

Nitrification and carbon removal are investigated in aerobicbatch digestion of various sludges. The experiments arecarried out with activated sludge (Test 1) and with amixture of activated and primary settling sludge (Test2). The nitrification rate was monitored, measuring theNO₂ ^- concentration. At the 3rd day of thedigestion 40.7 mg_NO2-N/l and 3.89 mg_NO2-N/l werefound in Tests 1 and 2 respectively. In a digestion process,the degradation of biomass indicates the beginning of theendogenous phase. Our measure for biomass content of thesludge was protein analysis. In Test 1, the first day valuesof 50.93 mg_TOC/ g_{dry matter}/day and 138.53mg_protein-C/g_{dry matter}/day for specific TOC andprotein-C removal rates showed, that the digestion processbegan in the endogenous phase. For Test 2, since theendogenous phase began after removal of raw organic matter inprimary settling sludge, specific TOC and protein-C removalrates were observed to be 60.12 mg_TOC/g_{dry matter}/dayand 26.72 mg_protein-C/g_{dry matter}/day,respectively.     

Conventional, microwave, and ultrasound sequential extractions for the fractionation of metals in sediments within the Petrochemical Industry, Serbia

In this paper, the main objective was fractionation of Cd, Cu, Ni, Pb, Zn, Ca, Fe, and K in certificate material and sediment samples gathered from and around the Petrochemical Industry using the conventional, microwave and ultrasonic sequential extraction. Microwave oven and ultrasound bath were used as an energy source for achieving faster extraction. Additional heating and boiling of samples were avoided by using lower power and shorter time for microwave and ultrasound extraction. Precision and accuracy of procedure were evaluated by using certificate material (BCR701). Acceptable accuracy of metals (87.0–111.3 %) was achieved for all three-step sequential of conventional extraction protocol. An accuracy of the fourth step has been verified with two certificate materials: BCR143R and 146R. The range of total extracted metal concentrations from sediments was similar for all three extraction techniques. A significant high percentage of Cd, Cu, and Zn were obtained after extraction of the exchangeable and acid soluble sediment fraction. Principal component analysis of values obtained after determination of risk assessment code using conventional and ultrasound sequential extraction show similarity of these values. Accuracy, recovery, and risk assessment code values imply that ultrasound sequential extraction is a more suitable, accelerated sequential extraction procedure (30 min per extraction step) than microwave extraction in applied conditions.     

Impact of the toxicity of Cylindrospermopsis raciborskii (Woloszynska) Seenayya & Subba Raju on laboratory rats in vivo

In vivo laboratory studies of toxicity were performed on Wistar rats using a methanol extract produced by the natural population of Cylindrospermopsis raciborskii (abundance of 2.13 × 10⁵ trichomes mL⁻¹) collected at Aleksandrovac Lake (Serbia). HPLC analysis showed that the extract contains 6.65 μg cylindrospermopsin (CYN) mg⁻¹. The rats were killed 24 or 72 h after a single intraperitoneal injection of C. raciborskii extract in concentrations of 1500, 3000, 6000 and 12,000 μg kg⁻¹ body weight (bw) and an equivalent amount of CYN as present in the highest dose of the extract (79.80 μg CYN kg⁻¹ bw). The genotoxic effect on the livers treated with C. raciborskii was evaluated using comet assay and potential induction of oxidative stress as the toxicity mechanism associated with the presence of CYN in extract. The results from the analyses of DNA damage in the comet tail length, tail moment and percentage of DNA in the tail in the liver indicated that administration of extract and CYN present statistically significant difference when compared with the negative control group. Although an increase in the frequency of selected parameters induced by the CYN was observed in the liver, this damage was less than the damage resulting from the administration of the highest dose of extract. The changes in the biochemical parameters of the hepatic damage showed that the application of single doses of the extract and CYN did not cause serious liver damage in rats. The extract and CYN significantly increased oxidative stress in rats’ liver after a single exposure.

     

Lead isotope ratios as tool for elucidation of chemical environment in a system of Macrolepiota procera (Scop.) Singer - soil

Environmental Science and Pollution Research - The analysis of isotope ratios of lead in the mushrooms and soil, where they were grown, assisted with a principal component analysis, offered a new...