Miscanthus for Renewable Energy Generation: European Union Experience and Projections for Illinois

Mitigation and Adaptation Strategies for Global Change -     

生物多样性在路域植被恢复中的应用

从生物多样性的特点出发 ,根据公路路域的特点以及近年来公路绿化成功与失败的经验 ,探讨植物多样性在公路植被恢复中的应用。自然界中植物通过多种多样的组合体而存在 ,多样性是自然形成 ;利用植物多样性原理可以提高路域植被的恢复水平和景观效果     

掘进面出风口风流与风幕调控下的粉尘分布响应曲面优化研究*

为了解决煤矿掘进面风筒出风口参数不能动态变化,而传统风幕全断面控尘效果不理想引起的粉尘浓度高等问题,通过分析风幕和出风口参数对粉尘分布规律的影响,以此得到合理的出风口风流与风幕综合调控方案,降低粉尘浓度。以陕西神木柠条塔煤矿N1212巷道为研究对象,利用Fluent软件建立出风口风流与风幕综合调控的粉尘场有限元模型,设计出风口风流及风幕综合调控响应曲面实验,得到最佳综合调控方案为:风幕射流出口宽度为0.16 m,风幕射流出口速度为6 m/s,出风口口径为0.9 m,出风口右偏角度为3°。搭建相似模拟实验平台来验证最佳综合调控方案,研究结果表明:调控后回风侧行人呼吸处和司机位置处粉尘平均浓度分别降低89%和81%,有效改善掘进面作业环境。     

Classification and comparison of municipal solid waste based on thermochemical characteristics

Municipal solid waste (MSW) has been normally sorted into six categories, namely, food residue, wood waste, paper, textiles, plastics, and rubber. In each category, materials could be classified further into subgroups. Based on proximate and ultimate analysis and heating value, statistical methods such as analysis of variance (ANOVA) and cluster analysis were applied to analyze the characteristics of MSW in every subgroup and to try to distinguish their relative properties. The chemical characteristics analysis of MSW showed that polyethylene (PE), polypropylene (PP), and polystyrene (PS) had the highest volatile matter content, with almost no ash and fixed carbon, while polyethylene terephthalate (PET) had high carbon content but low hydrogen content. Bones and vegetables had the highest ash content, while nutshells and rubber had the highest fixed carbon content. Paper and starch food had the highest oxygen content, and wool and bones had the highest nitrogen and sulfur content. Polyvinyl chloride (PVC) had the highest chlorine content at about 55%. PE, PP, and PS had the highest heating value, followed by chemical products such as rubber and chemical fiber. Conversely, paper, vegetables and bones had the lowest heating value. The results of cluster analysis of MSW components showed that fruit peel, weeds, wood, bamboo, leaves and nutshells could be classified as the lignocellulose category; starch food, cotton, toilet paper, printing paper and cardboard could be classified as the glucose monomer category; wood and chemical fiber could be classified as the high nitrogen and sulfur category; and PE, PP, and PS could be cluster as the polyolefin category.

Implications: The yield of municipal solid waste (MSW) is constantly increasing and waste to energy (WTE) has been used extensively all over the world. During the processes of incineration, pyrolysis, or gasification, the impact of physical and chemical properties of MSW is of great significance. However, the traditional classification of MSW is too general to provide more detailed information in many investigations. It is necessary to perform the investigation of characteristics of combustible MSW to distinguish different categories of MSW and find out their subclassification.     

Characterization of PM(2.5) collected during broadcast and slash-pile prescribed burns of predominately ponderosa pine forests in northern Arizona

Prescribed burning, in combination with mechanical thinning, is a successful method for reducing heavy fuel loads from forest floors and thereby lowering the risk of catastrophic wildfire. However, an undesirable consequence of managed fire is the production of fine particulate matter or PM(2.5) (particles ≤2.5 μm in aerodynamic diameter). Wood-smoke particulate data from 21 prescribed burns are described, including results from broadcast and slash-pile burns. All PM(2.5) samples were collected in situ on day 1 (ignition) or day 2. Samples were analyzed for mass, polycyclic aromatic hydrocarbons (PAHs), inorganic elements, organic carbon (OC), and elemental carbon (EC). Results were characteristic of low intensity, smoldering fires. PM(2.5) concentrations varied from 523 to 8357 μg m(-3) and were higher on day 1. PAH weight percents (19 PAHs) were higher in slash-pile burns (0.21 ± 0.08% OC) than broadcast burns (0.07 ± 0.03% OC). The major elements were K, Cl, S, and Si. OC and EC values averaged 66 ± 7 and 2.8 ± 1.4% PM(2.5), respectively, for all burns studied, in good agreement with literature values for smoldering fires.     

武钢金山店铁矿某通风系统项目评估

介绍了金山店铁矿通风系统多级站和机站设计；阐述了该项目的施工，检测及通风效果评估情况；对安全生产提出了全面，系统的建议。     

液化气运输过程中的危险分析

应用各种爆炸后果估计模型对液化气运输过程中的爆炸后果进行了评估，并用ETA分析方法对存在的危险进行了分析，指出了控制措施。     

聚合氯化铝铁在纺织印染废水处理中的应用

主要探讨聚合氯化铝铁（PAFC）在纺织印染废水处理的应用,并对影响絮凝效果的主要因素,如投加量、pH值等进行研究,找出最佳反应条件.     

盐度对模拟餐厨垃圾发酵液产聚羟基脂肪酸酯工艺的影响

利用餐厨垃圾发酵液生产聚羟基脂肪酸酯(PHA)可以在废物处理的同时实现有价资源回收。为探究发酵液中盐分对产PHA菌群富集过程的影响,以模拟餐厨垃圾发酵液为底物,研究了盐度存在下污泥理化性质、富集过程主要指标及菌群PHA合成能力等变化。结果表明,未经盐度富集的菌群易受到盐度抑制,在15 g·L⁻¹的盐度条件下,污泥PHA最大合成量可降至39.9%。富集过程中盐度的增加有利于污泥沉降性的提升,低盐度(5 g·L⁻¹)下菌群分泌胞外聚合物量最多,达49.8 mg·g⁻¹(以VSS计),对菌群保护能力最强。不同盐度条件下的富集系统皆能保持较好的生态选择压力,但盐度对微生物生长的抑制随着浓度的增大而增强。经过盐度存在下长期富集后的污泥,在高盐度(10、15 g·L⁻¹)底物条件下,仍能获得较高的PHA最大合成能力,但其较低的生长活性不利于最终PHA产量的提升,短期富集下,高盐度会抑制PHA的合成;而低盐度(5 g·L⁻¹)有助于提高PHA合成能力,最高达50.5%。     

不同工况条件混合赤泥力学特性变化规律

在利用常规土工实验和XRF、XRD、SEM等微观测试手段分析了刚出厂混合赤泥化学成分、矿物组成、微观结构的基础上,通过无侧限抗压强度实验和固结排水三轴剪切实验对自然风干、浸水饱和、非饱和-饱和干湿循环3种工况条件下混合赤泥不同龄期力学特性的变化规律进行了研究。结果表明,自然风干试样的无侧限抗压强度和粘聚力要明显大于相同龄期浸水饱和试样和干湿循环试样,说明混合赤泥的强度形成与滤水过程有一定联系,且其强度的增长均主要集中在脱水龄期前70天内;混合赤泥在3种不同工况条件下无侧限抗压强度和粘聚力均有一定程度的增长,说明混合赤泥可在浸水环境下生成不可逆增长的具有水硬性的胶结矿物,使其在水环境中不发生崩解,可保证混合赤泥堆体在自然堆存过程中其力学特性满足安全堆载要求。