Cracking the Achilles’ heel of energy performance contracting projects: the credit risk identification method for clients

ABSTRACT

A credit risk identification model is established to examine the credit status of Energy performance contracting (EPC) project clients (i.e., energy-using companies) in China based on rough set theory. The model is verified with data from 120 listed companies at different times. Study shows that lack of credit is one of the main obstacles to the implementation of EPC projects, and information asymmetry is the main reason for this lack of credit among potential clients in China. The credit risk identification method based on rough set theory can make up for the shortcomings of existing EPC projects in terms of credit risk identification, including redundant information and indicators, and unclear decision rules. Credit risk identification indicators of clients are dynamic. The research results can help energy service companies (ESCOs) determine the credit status of clients, facilitate cooperation between ESCOs and clients, and help explain the various dynamics of clients’ credit risk identification indicators over time.     

含油污泥处理新技术与设备研究

针对辽河油田含油污泥处理现状,经过科研攻关、工艺优选,研制出高效、环保的处理工艺技术和设备,通过该技术的核心设备"三相分离器"分离含油污泥各种杂质,再进行综合利用。结果表明:该项技术与设备对含油污泥处理彻底,综合利用率高,同时具有实用性强、操作性好及良好的环境效益和经济效益。     

石化环境监测LIMS系统中BOD5的组态方法

文章阐述了石化环境监测LIMS系统中BOD5的组态方法。在组态之前,需要根据实际工作中变量的常规取值对BOD5和溶解氧的计算公式进行简化,组态BOD5的LIMS分析方法所需的组态分项包括水样在培养前后的溶解氧浓度等15个,每个分项均应根据数据类型、修约规则、计量单位设置相应的属性,空白样在培养前、后的溶解氧质量浓度用LabWare LIMS的"标准试剂"功能实现组态。BOD5值根据分析方法的计算公式、检出限、测定范围等限定条件编制程序语句计算出最终结果,编程组态后的LIMS分析经反复测试完全正确。     

生物膜填料塔净化有机废气研究

为在国内开展生物化学法净化低浓度有机废气的研究工作,采用国内现有微生物菌种挂膜接种的生物膜填料塔净化低浓度甲苯废气,结果表明,在入口气体甲苯浓度0.183～1.803mg/L及气体流量86.4～190.8L/h（停留时间6.2～13.6s）的实验范围内,增加入口气体甲苯浓度和气体流量,可使甲苯的生化去除量增大,每升体积的生物膜填料对甲苯的生化去除量最大可达157.13mg/h。由实验结果推断,生物膜填料塔对废气中甲苯的净化去除过程属于传质控制过程。对比结果表明,本研究建立的动力学模式对实际过程有很好的适用性,计算值与实验值之间的相关系数R＝0.98。     

巯基棉预富集、气相色谱-原子吸收联用技术测定水样中丁基锡化合物

建立了巯基棉预富集、气相色谱－原子吸收联用技术测定水样中痕量丁基锡化合物的方法。研究了巯基棉预富集丁基锡的环境影响因素和解吸方法。三种形态丁基锡均在pH为中性、低盐度时有最佳吸附。三丁基锡和二丁基锡在所研究水体的预富集测定中均有较佳回收率（92.5％～100.8％）。另外,对巯基棉吸附三种形态丁基锡的动力学特征做了研究。     

生物法净化处理低浓度挥发性有机及恶臭气体

结合课题组研究工作,概要介绍生物法废气净化技术的基础菌种及应用条件、菌种库与菌种批量生产线、初步工业应用等方面的研究成果与应用情况。     

La-Na-Co-Mn-O系钙钛矿型催化剂同时去除柴油机碳颗粒和NOx性能的研究

采用低温燃烧法制备了Na+部分取代La3+的La1-xNaxCo0.5Mn0.5O3系钙钛矿型复合氧化物催化剂。利用程序升温反应(TPR)技术,对催化剂应用于柴油机常规排放物中的碳微粒(soot)和氮氧化合物(NOx)的同时催化脱除性能进行了研究。     

用若干固体废弃物改良土壤的可行性研究

合理利用粉煤灰、水库淤积物和污泥三种废弃物对保护环境有重要意义。选择干旱半干旱地区 ,联合施用上述三种废物进行土壤改良 ,兼有建设生态环境的作用。盆栽试验结果表明 :粉煤灰、水库淤积物、污泥按适当比例配合施用 ,对改良贫瘠土壤、促进植物生长有明显效果。     

Removal of phosphate from wastewater using alkaline residue

Alkaline residue(AR) was found to be an efficient adsorbent for phosphate removal from wastewater. The kinetic and equilibrium of phosphate removal were investigated to evaluate the performance of modified alkaline residue. After treatment by NaOH(AR-NaOH), removal performance was significantly improved, while removal performance was almost completely lost after treatment by HCl(AR-HCl). The kinetics of the removal process by all adsorbents was well characterized by the pseudo second-order model. The Langmuir model exhibited the best correlation for AR-HCl, while AR was effectively described by Freundlich model. Both models were well fitted to AR-NaOH. The maximum adsorption capacities calculated from Langmuir equation were in following manner: AR-NaOH AR AR-HCl. Phosphate removal by alkaline residue was pH dependent process. Mechanisms for phosphate removal mainly involved adsorption and precipitation, varied with equilibrium pH of solution. For AR-HCl, the acid equilibrium pH( 6.0) was unfavorable for the formation of Ca-P precipitate, with adsorption as the key mechanism for phosphate removal. In contrast, for AR and ARNaOH, precipitation was the dominant mechanism for phosphate removal, due to the incrase on pH( 8.0) after phosphate removal. The results of both XRD and SEM analysis confirmed CaHPO4·2H2O formation after phosphate removal by AR and AR-NaOH.     

气体扩散电极制备及其对苯酚降解效果的研究

以质量比9∶1的活性炭和乙炔黑制备气体扩散电极,着重研究电流密度、pH值、曝气量等因素对H2O2产生量的影响.结果表明:pH值在较大范围内均适用;电流密度控制在50～75 mA/cm2,曝气量确定为5 L/min时,反应产生H2O2较多.另外,利用该气体扩散电极做阴极,石墨电极做阳极,以Na2SO4为电解质,研究了电解时间、电流密度、pH值、初始苯酚浓度、曝气量等因素对苯酚降解效果的影响.结果表明:在电流密度为75 mA/cm2、曝气量为5 L/min、初始pH=3的条件下,当苯酚的初始浓度为80 mg/L时,1 h后其去除率达77%.