Seventh International Congress of Ecology: Symposium on “Trace Metals in the Environment” Florenz, Juli 1998

Der VII. Internationale Kongre? für ?kologie ergab die M?glichkeit, auch einige Spezialisten aus der ?kologischen Spurenelementforschung in Florenz zusammenzubringen. Dabei zeigte sich deutlich, da? noch wesentliche Arbeit auf dem Weg zu einem generellen Verst?ndnis der Wirkung einzelner Elemente und ihrer Spezies vor uns liegt. Obwohl auf analytischem Sektor beachtliche Durchbrüche durch die Entwicklung leistungsf?higer Methoden bewerkstelligt wurden, bleiben noch wichtige Fragen zur essentiellen und/oder toxikologischen Wirkung einzelner Spurenelemente zu beantworten. Hieraus lassen sich aus den Beitr?gen der Teilnehmer des Symposiums folgende Forderungen ableiten:

Electrosensory basis for individual recognition in a weakly electric, mormyrid fish, Pollimyrus adspersus (Günther, 1866)

Pollimyrus adspersus discriminates the individually variable waveforms of Electric Organ Discharges (EODs) of conspecifics of only 150–250 s duration. We examined: (1) the discrimination threshold for artificially generated EODs of similar waveform, (2) the mechanism of signal analysis (spectral vs temporal) present, by determining the discrimination between different waveforms of identical amplitude spectra, and (3) the threshold field intensity and reach of discrimination. The triphasic P. adspersus EOD waveform was artificially generated by superimposing two Gaussians, one wide, the second narrow, inverted, and of threefold amplitude. The natural variability among individual EOD waveforms was simulated by phase-shifting one Gaussian relative to the other. The symmetrical waveform where the peaks of the two Gaussians coincided was used as a reference (phase shift=0, rewarded stimulus S+). Results were: (1) in food-rewarded conditioning experiments, trained fish (N=7) detected a phase-shift in artificial EOD stimuli as low as 2 s (N=2 fish), 6 s (N=1) and 10 s (N=1). (2) All fish tested (N=3) discriminated between artificial EODs of identical amplitude spectra but different waveforms (hence, different phase spectra), demonstrating a temporal mechanism of signal analysis. (3) The maximum reach of waveform discrimination was 130 cm at 4.9 V_p-p/cm and 100 S/cm water conductivity (test signal generated at natural amplitude), that is, similar to the reach of EOD detection. Therefore, among the three kinds of electroreceptor organ present in mormyrids, we consider Knollenorgane the relevant sensory organs for EOD waveform discrimination.Communicated by J. Krause     

Effects of new technologies with special regard for the implementation process per se

The aim of this study was to investigate the effects of the implementation process to new technologies [e.g. drawing board/computer-aided design (CAD), microfiche/electronic data processing] on the employees concerned. Since the emphasis of the study lay in the intrinsic relationship of the implementation process with stress reactions, the parameters were measured at the place of work in a longitudinal design. Employees (n = 279) in seven companies (work fields: CAD, clerical work, telephone information desk) were tested three times — two months prior to, during, and 12 months after implementation. Aspects of strain and satisfaction were taken into account at each measurement phase. A special test-instrument was designed to describe the ’style of implementation‘ (manner in which implementation took place) particular to each company. The level of strain was found to increase during the implementation process. The amount of this increase was found to correlate with the company's style of implementation as well as with the type of the individual's work activity. The highest levels were found among those employees little included in the implementation process and those whose work is described as monotonous.     

Influence of platinum, palladium and rhodium as compared with cadmium, nickel and chromium on cell viability and oxidative stress in human bronchial epithelial cells

The platinum group elements (PGE) Pt, Pd and Rh are increasingly emitted into the environment by automobile catalytic converters. Whereas the biological availability of PGE to plants and animals has been demonstrated, only few studies concentrate on the influence of PGE on a cellular level. The effects of Pt, Pd and Rh compared with Cd, Ni and Cr on cell viability and oxidative stress response using soluble metal salts were studied in the human bronchial epithelial cell line BEAS-2B. Whilst Rh(III) showed little influence, both Pt(II) and Pt(IV) as well as Pd(II) had significant effects on cell viability at levels comparable to Cd(II) and Cr(VI). Arranging metal species in order of increasing toxicity as determined by LC50 yields: Rh(III)=1.2 mmol/L相似文献   

The major components of particles emitted during recycling of waste printed circuit boards in a typical e-waste workshop of South China

Electronic waste from across the world is dismantled and disposed of in China. The low-tech recycling methods have caused severe air pollution. Air particle samples from a typical workshop of South China engaged in recycling waste printed circuit boards have been analyzed with respect to chemical constituents. This is the first report on the chemical composition of particulate matter (PM) emitted in an e-waste recycling workshop of South China. The results show that the composition of PM from this recycling process was totally different from other emission sources. Organic matter comprised 46.7–51.6% of the PM. The major organic constituents were organophosphates consisting mainly of triphenyl phosphate (TPP) and its methyl substituted compounds, methyl esters of hexadecanoic and octadecanoic acids, levoglucosan and bisphenol A. TPP and bisphenol A were present at 1–5 orders of magnitude higher than in other indoor and outdoor environments throughout the world, which implies that they might be used as potential markers for e-waste recycling. The elemental carbon, inorganic elements and ions had a minor contribution to the PM (<5% each). The inorganic elements were dominated by phosphorus and followed by crustal elements and metal elements Pb, Zn, Sn, and lesser Cu, Sb, Mn, Ni, Ba and Cd. The recycling of printed circuit boards was demonstrated as an important contributor of heavy metal contamination, particularly Cd, Pb and Ni, to the local environment. These findings suggest that this recycling method represents a strong source of PM associated with pollutants to the ambient atmosphere of an e-waste recycling locale.     

Mobile fission and activation products in nuclear waste disposal

When disposing nuclear waste in clay formations it is expected that the most radiotoxic elements like Pu, Np or Am move only a few centimetres to meters before they decay. Only a few radionuclides are able to reach the biosphere and contribute to their long-term exposure risks, mainly anionic species like I129, Cl36, Se79 and in some cases C14 and Tc99, whatever the scenario considered. The recent OECD/NEA cosponsored international MOFAP workshop focussed on transport and chemical behaviour of these less toxic radionuclides. New research themes have been addressed, such as how to make use of molecular level information for the understanding of the problem of migration at large distances. Diffusion studies need to face mineralogical heterogeneities over tens to hundreds of meters. Diffusion rates are very low since the clay rock pores are so small (few nm) that electrostatic repulsion limits the space available for anion diffusion (anion exclusion). The large volume of traversed rock will provide so many retention sites that despite weak retention, even certain of these “mobile” nuclides may show significant retardation. However, the question how to measure reliably very low retention parameters has been posed. An important issue is whether redox states or organic/inorganic speciation change from their initial state at the moment of release from the waste during long term contact with surfaces, hydrogen saturated environments, etc.     

Hydraulic characterisation of the Stuttgart formation at the pilot test site for CO2 storage, Ketzin, Germany

The paper presents an approach for the interpretation of hydraulic tests of a CO₂ storage reservoir. The sandstone reservoir is characterised by a fluviatile channel structure embedded in a low-permeability matrix. Pumping tests were carried out in three wells, with simultaneous pressure monitoring in each well.The hydraulic parameters (permeability and storativity) and the boundary configurations were calibrated using three different approaches: (i) parameter calibration and type curve interpretation for single-hole tests, (ii) calibration of the entire build-up phase for cross-hole tests, and (iii) calibration of the initial pressure response for cross-hole pumping tests. In addition, the arrival time of the pressure response was determined and provides additional information about the pathways of hydraulic connection.The measured pumping test permeabilities of the formation were much lower than those measured on the cores, which is very unusual. The pumping test permeabilities are mainly between 50 mD and 100 mD (millidarcy), while core samples show a mean aquifer permeability of 500–1100 mD. Based on this it was concluded that some kind of continuous low-permeability structure exists, which was supported by core material. Three possible aquifer configurations were considered. The first and second were derived from traditional pumping test analysis and were conceptualised using flow boundaries. Each of the analyses provides a different result. A method was developed in which these differences were resolved by interpreting the pressure response with respect to its spatial and temporal sensitivity. This solution lead to a third configuration which was mainly based on spatially-variable permeabilities. Taking into account the pumping test results, the geological background and the behaviour of injected CO₂, we consider only the third configuration to be realistic. The results are in good agreement with modelled CO₂ arrival times and pressure history.     

Occurrence, behavior and effects of nanoparticles in the environment

The increasing use of engineered nanoparticles (NP) in industrial and household applications will very likely lead to the release of such materials into the environment. Assessing the risks of these NP in the environment requires an understanding of their mobility, reactivity, ecotoxicity and persistency. This review presents an overview of the classes of NP relevant to the environment and summarizes their formation, emission, occurrence and fate in the environment. The engineered NP are thereby compared to natural products such as soot and organic colloids. To date only few quantitative analytical techniques for measuring NP in natural systems are available, which results in a serious lack of information about their occurrence in the environment. Results from ecotoxicological studies show that certain NP have effects on organisms under environmental conditions, though mostly at elevated concentrations. The next step towards an assessment of the risks of NP in the environment should therefore be to estimate the exposure to the different NP. It is also important to notice that most NP in technical applications are functionalized and therefore studies using pristine NP may not be relevant for assessing the behavior of the NP actually used.