Life-cycle-assessment of the historical development of air pollution control and energy recovery in waste incineration

Incineration of municipal solid waste is a debated waste management technology. In some countries it is the main waste management option whereas in other countries it has been disregarded. The main discussion point on waste incineration is the release of air emissions from the combustion of the waste, but also the energy recovery efficiency has a large importance.The historical development of air pollution control in waste incineration was studied through life-cycle-assessment modelling of eight different air pollution control technologies. The results showed a drastic reduction in the release of air emissions and consequently a significant reduction in the potential environmental impacts of waste incineration. Improvements of a factor 0.85–174 were obtained in the different impact potentials as technology developed from no emission control at all, to the best available emission control technologies of today (2010).The importance of efficient energy recovery was studied through seven different combinations of heat and electricity recovery, which were modelled to substitute energy produced from either coal or natural gas. The best air pollution control technology was used at the incinerator. It was found that when substituting coal based energy production total net savings were obtained in both the standard and toxic impact categories. However, if the substituted energy production was based on natural gas, only the most efficient recovery options yielded net savings with respect to the standard impacts. With regards to the toxic impact categories, emissions from the waste incineration process were always larger than those from the avoided energy production based on natural gas. The results shows that the potential environmental impacts from air emissions have decreased drastically during the last 35 years and that these impacts can be partly or fully offset by recovering energy which otherwise should have been produced from fossil fuels like coal or natural gas.     

Factors affecting the implementation of green specifications in construction

Green specifications constitute one of the important elements in green construction. New sustainability requirements and changing priorities in construction management have spurred the emerging green specifications to a faster pace of development. A cross-sectional survey has been conducted in Hong Kong in 2007 to identify principal factors leading to the success of preparing green specifications. Based on extensive construction management literature, 20 variables concerning sustainable construction were summarized. Using the Mann–Whitney U-test, the subtle differences between stakeholders in specifying construction work have been detected even with the high consistency of the responses among the groups. Moreover, five independent factors for successful specification of green construction have been categorized by factor analysis. They are related to (1) green technology and techniques, (2) reliability and quality of specification, (3) leadership and responsibility, (4) stakeholder involvement, and (5) guide and benchmarking systems. Whilst the first and fourth factors are generally more important, different stakeholder groups have different emphases. The results of the survey have been validated against established principles.     

Leading and lagging: Process safety climate–incident relationships at one year

In order to evaluate the leading and lagging effects of process safety climate on incidents, we correlated safety climate survey data with organizational safety records from before and after the survey time period. We obtained data from a large, multinational organization with manufacturing operations involving a number of complex processes, chemicals, and hazardous substances. A total of 7728 employees from 62 sites responded to a safety climate survey in 2007. Individual responses were aggregated to the site-level and matched to site-level organizational records of process safety incidents 1 year before and 1 year after survey administration. Employees’ perceptions of good routine housekeeping were significantly related to environmental impact incidents as both a leading and a lagging indicator, as well as fires/explosions and property damage outcomes. Employees’ perceptions of systems to prevent backlogs and the extent to which health and safety problems are promptly corrected were also related to environmental releases and fires/explosions. Implications for process safety climate research, organizational survey strategies, and organizational climate change are discussed.     

A Lost Link between a Flightless Parrot and a Parasitic Plant and the Potential Role of Coprolites in Conservation Paleobiology

Late Quaternary extinctions and population fragmentations have severely disrupted animal‐plant interactions globally. Detection of disrupted interactions often relies on anachronistic plant characteristics, such as spines in the absence of large herbivores or large fruit without dispersers. However, obvious anachronisms are relatively uncommon, and it can be difficult to prove a direct link between the anachronism and a particular faunal taxon. Analysis of coprolites (fossil feces) provides a novel way of exposing lost interactions between animals (depositors) and consumed organisms. We analyzed ancient DNA to show that a coprolite from the South Island of New Zealand was deposited by the rare and threatened kakapo (Strigops habroptilus), a large, nocturnal, flightless parrot. When we analyzed the pollen and spore content of the coprolite, we found pollen from the cryptic root‐parasite Dactylanthus taylorii. The relatively high abundance (8.9% of total pollen and spores) of this zoophilous pollen type in the coprolite supports the hypothesis of a former direct feeding interaction between kakapo and D. taylorii. The ranges of both species have contracted substantially since human settlement, and their present distributions no longer overlap. Currently, the lesser short‐tailed bat (Mystacina tuberculata) is the only known native pollinator of D. taylorii, but our finding raises the possibility that birds, and other small fauna, could have once fed on and pollinated the plant. If confirmed, through experimental work and observations, this finding may inform conservation of the plant. For example, it may be possible to translocate D. taylorii to predator‐free offshore islands that lack bats but have thriving populations of endemic nectar‐feeding birds. The study of coprolites of rare or extinct taxonomic groups provides a unique way forward to expand existing knowledge of lost plant and animal interactions and to identify pollination and dispersal syndromes. This approach of linking paleobiology with neoecology offers significant untapped potential to help inform conservation and restoration plans. Un Eslabón Perdido entre un Loro No Volador y una Planta Parásita y el Papel Potencial de Coprolitos en Paleobiología de la Conservación     

INSIGHT: a framework for determining impacts of changes in land and water policies.

CSIRO Sustainable Ecosystems is constructing a spatially explicit modelling system capable of exploring alternative land and water policy alternatives against plausible price, cost, and climate scenarios for the next 20 years. INSIGHT will be used to identify the likely impacts of land and water policy options on regional economies and structural adjustment. Flowcharts have been constructed for most of the major crop and pasture and associated economic models for commodities produced in the Lachlan River Catchment of New South Wales. This enabled the most important components and interrelationships within these models to be readily identified. The next step has been to construct models at the regional scale that contain the essential elements of the more-detailed point models. The paper describes the progress to date in describing these models, and how they have been integrated into a coordinated agricultural crop production evaluation system.     

Development of controlled release nanoformulations of carbendazim employing amphiphilic polymers and their bioefficacy evaluation against Rhizoctonia solani

Controlled release nanoformulations of carbendazim (Methyl 1H-benzimidazol-2-ylcarbamate), a systemic fungicide, have been prepared using laboratory synthesized poly(ethylene glycols) (PEGs)-based functionalized amphiphilic copolymers. The release kinetics of carbendazim from developed controlled release (CR) formulations was studied and compared with that of the commercially available 50% Wettable Powder (WP). Further, the bioefficacy evaluation of developed formulations was done against plant pathogenic fungi Rhizoctonia solani by the poison food technique method. The release of maximum amount of carbendazim from developed formulations was dependent on the molecular weight of PEGs and was found to increase with increasing molecular weights. The range of carbendazim release was found to be between 10th to 35th day as compared to commercial formulation which was up to 7th day. The diffusion exponent (n value) of carbendazim in water ranged from 0.37 to 0.52 in the tested formulations. The half-release (t_1/2) values ranged between 9.47 and 24.20 days, and the period of optimum availability (POA) of carbendazim ranged from 9.15 to 26.63 days. Also, ED₅₀ values of the developed formulations vary from 0.40 to 0.74 mg L^?1. These formulations can be used to optimize the release of carbendazim to achieve disease control for the desired period depending on the matrix of the polymer used.