Enhanced activation of peroxymonosulfate by CNT-TiO2 under UV-light assistance for efficient degradation of organic pollutants

CNT-TiO₂ composite is used to activate PMS under UV-light assistance. Superior performance is due to the enhanced electron-transfer ability of CNT. SO₄•⁻, •OH and ¹O₂ play key roles in the degradation of organic pollutants. In this work, a UV-light assisted peroxymonosulfate (PMS) activation system was constructed with the composite catalyst of multi-walled carbon nanotubes (CNT) - titanium dioxide (TiO₂). Under the UV light irradiation, the photoinduced electrons generated from TiO₂ could be continuously transferred to CNT for the activation of PMS to improve the catalytic performance of organic pollutant degradation. Meanwhile, the separation of photoinduced electron-hole pairs could enhance the photocatalysis efficiency. The electron spin resonance spectroscopy (EPR) and quenching experiments confirmed the generation of sulfate radical (SO₄•⁻), hydroxyl radical (•OH) and singlet oxygen (¹O₂) in the UV/PMS/20%CNT-TiO₂ system. Almost 100% phenol degradation was observed within 20 min UV-light irradiation. The kinetic reaction rate constant of the UV/PMS/20%CNT-TiO₂ system (0.18 min⁻¹) was 23.7 times higher than that of the PMS/Co₃O₄ system (0.0076 min⁻¹). This higher catalytic performance was ascribed to the introduction of photoinduced electrons, which could enhance the activation of PMS by the transfer of electrons in the UV/PMS/CNT-TiO₂ system.     

混合型污水处理厂原位生物强化脱氮中试及微生物群落结构分析研究

针对混合型污水处理厂进水水质波动大、C/N低、总氮稳定达标困难等共性问题,开发出适宜于低C/N、贫营养等苛刻环境条件的高效脱氮菌剂.现场中试结果表明:经过脱氮菌强化后,生化系统脱氮效率提升8.5百分点,出水平均总氮较强化前下降3 mg/L,出水水质稳定性明显提升,生物强化效果显著.在不补加碳源条件下,深度处理出水总氮完...     

Simultaneous conversion of CHClF(2) and CH(3)Br to CH(2)CF(2)

Gas phase reaction of CHClF(2) with CH(3)Br in an alumina tube reactor at 773-1123 K as a function of various input ratios of CH(3)Br to CHClF(2) is presented. The major products detected include C(2)F(4), CH(2)CF(2), and CH(4). Minor products include CH(3)Cl, CHF(3), C(2)H(4), C(2)H(2), CH(2)CF-CF(3), and C(2)H(3)F. The reaction produces a high yield of CH(2)CF(2) (53% based on CHClF(2) feed) at 1123 K and an input molar ratio of CH(3)Br to CHClF(2) of 1.8, suggesting that the reaction potentially can be developed as a process to convert two ozone depleting substances (CHClF(2) and CH(3)Br) to a highly valuable chemical, CH(2)CF(2). The reaction of CHClF(2) with CH(3)Cl and CH(3)I was also investigated under similar reaction conditions, to assist in understanding the reaction chemistry involved in the reaction of CHClF(2) with CH(3)Br.     

Photocatalytic oxidation of triclosan

In the spring of 2003, there was an outbreak of the severe respiratory syndrome (SARS) in Hong Kong. Health concerns have thus triggered an increased and predominant use of various types of household cleansing agents such as triclosan (5-chloro-2-(2,4-dichlorophenoxy)phenol). However, it has been reported recently that triclosan could be photochemically converted to toxic 2,8-dichlorodibenzo-p-dioxin (2,8-Cl(2)DD) in the environment. It is therefore necessary to develop environmentally friendly methods for the treatment of triclosan. To this end, photocatalytic degradation of triclosan in aqueous solution was conducted using TiO(2) (Degussa P25) under irradiation of UV light (lambda < 365 nm). It was found that triclosan could be degraded by this approach. Hydrogen peroxide was added to enhance the degradation process, and the optimal initial hydrogen peroxide concentration for triclosan degradation was 0.005% (w/v). Product identification indicated that triclosan oxidation occurred at its phenol moiety and yielded quinone and hydroquinone intermediates. The formation of a dichlorophenol intermediate in triclosan degradation suggested bond-breaking of the ether linkage occurred during the process. Moreover, no chlorinated dibenzo-p-dioxin congener was detected. These findings confirm that the photocatalytic degradation of triclosan is an environmentally friendly process.     

负载型纳米TiO2光催化降解水中微量溶解性间二甲苯

以高压汞灯为光源 ,采用浸涂 -烧结法制备的负载型纳米TiO2 作为光催化剂 ,通过对水中微量溶解性间二甲苯的光催化氧化过程的研究表明 ,初始浓度在 6 .6 8— 17.36mg/L的范围内 ,间二甲苯的光催化反应遵循表观一级反应动力学规律 ,反应的表观速率常数随溶液初始浓度的增大而减小 ,半衰期则随初始浓度的增大而增加 ,经 1.5h反应后 ,溶液中间二甲苯的去除率从 17.36mg/L的 5 4 .4 4 %增加到 6 .6 8mg/L的 75 .90 %。     

改性玉米秸秆吸附Cu2+的动力学和热力学

本研究用ZnCl2作为活化剂,使用功率640 W的微波照射4 min的方法制备改性玉米秸秆。考察投加量、pH、吸附时间对吸附性能的影响,并对等温吸附特征、吸附动力学和热力学进行了系统研究。结果表明:投加量为0.2 g,pH为6,改性玉米秸秆对Cu2+具有很好的吸附效果,吸附在8 h后达到平衡。该吸附过程符合Langmuir及Freundlich等温吸附模型和准二级动力学方程,其反应的吉布斯自由能△G<0,为自发反应过程。     

土壤重金属的植物污染化学研究进展

针对中国土壤重金属污染加剧的趋势,为改善土壤环境质量和保障农产品安全,提出了土壤重金属的植物污染化学研究领域.结合多年的研究工作,从土壤重金属的植物根际化学行为、土壤重金属的植物吸收与解毒机制和重金属污染土壤的植物-微生物交互作用等方面简要阐述了土壤-植物系统中重金属的分布、存在形态、迁移转化、累积及生物学效应和控制规律的研究进展,并对将来的植物污染化学理论研究提出了展望.     

潜流湿地对典型选控性有机污染物去除的预测

建立潜流湿地有机污染物迁移转化模型,采用多孔介质模型描述潜流湿地的水力特性,并引入Monod方程相耦合,实现对湿地系统内部流场及水质浓度的同时模拟。通过实验,校核模型参数,并验证模型。结果表明,该模型能较好模拟潜流湿地中有机污染物的去除效果;计算条件下,在不同基质填料的潜流湿地中都会出现滞水区和快速通道,影响水力效率与污染物去除效果;预测了不同填料系统中7种典型选控性有机污染物的去除效果,其处理效率:苯胺苯酚二甲苯甲苯苯硝基苯氯苯,可通过优选填料提高吸附量和延长停留时间来提高选控性有机物的处理效果。     

可溶性有机质对芘在泥炭和高岭土上吸附和解吸的影响

为掌握可溶性有机质(DOM)对憎水性有机污染物吸附和解吸行为的影响,本研究选取四环多环芳烃——芘作为目标污染物,通过批平衡实验研究了不同分子量组分DOM对芘在泥炭和高岭土上吸附和解吸的影响.结果表明,吸附和解吸数据均可以用Freundlich模型很好地拟合(R2＞0.93).DOM的添加抑制了泥炭对芘的吸附,并且分子量...     

SBR工艺处理高盐度生活污水试验

针对海水冲厕产生的高含盐生活污水,试验采用SBR工艺分别研究了不同海水盐度的污水中有机物的降解及氨氮的去除情况。结果表明,在高盐度污水的生物处理系统中,污泥的驯化是关键的一步。有机物和氨氮的去除率总体上随着盐度的增大而降低,但在海水冲厕范围内(海水比例在30%内,盐度为10500mg/L,Cl-为5700mg/L),海水盐度对有机物及氨氮的去除影响不大。