A numerical study on the seasonal variability of polychlorinated biphenyls from the atmosphere in the East China Sea

A three-dimensional/high-resolution transport model for persistent organic pollutants (POPs) has been developed for the East China Sea (ECS). The POPs model has four compartments (gaseous, dissolved, phytoplankton-bound, and detritus-bound phases) and includes processes for diffusive air-water exchange, phytoplankton uptake/depuration to POPs, decomposition of dissolved phase, vertical sinking of phytoplankton, detritus production by phytoplankton mortality, and vertical sinking and decomposition of detritus. The POPs model is coupled with an ocean circulation model that can reproduce the seasonal variation in physical variables to represent the advection and diffusion of POPs. We applied the POPs model to the polychlorinated biphenyl congener 153 (PCB 153) from the atmosphere and examined the behavior of PCB 153 in the ocean. The model showed a remarkable seasonal variability of PCB 153. Concentrations in the dissolved and particulate phases are high in winter (January-March) and low in summer (July-September). In coastal regions, where chlorophyll a concentration is high, horizontal and vertical distributions in the dissolved and particulate PCB 153 concentrations are strongly affected by phytoplankton uptake. The sensitivity experiments on the dynamics of PCB 153 suggested that a change of Henry’s law constant associated with water temperature is the major factor controlling the seasonal variability of PCB 153. The model-based yearly mass balance of PCB 153 in the ECS indicated that most of the atmospheric input (35.5 kg year⁻¹) is removed by the horizontal advection outside the ECS (19.0 kg year⁻¹) and accumulates to the sea bottom by vertical sinking (15.7 kg year⁻¹). For comparison with PCB 153, we also conducted simulations for PCB 52, 101, and 180. The seasonal variations are similar to that of PCB 153. The mass balance of PCB 52 that has short half-life time and less hydrophobic property shows the different results compared with PCB 101, 153, and 180.     

Blooming of Microcystis aeruginosa in the reservoir of the reclaimed land and discharge of microcystins to Isahaya Bay (Japan)

Purpose

In the reservoir created in the reclaimed land in Isahaya Bay, Japan, Microcystis aeruginosa, which produces microcystins (MCs), bloomed every year, and the water with high levels of MCs in the reservoir has been often drained to Isahaya Bay to adjust the water level. The principal aims of this study are to clarify the water conditions suitable for blooming of M. aeruginosa in the reservoir, to follow the amount of distribution of MCs inside and outside the reservoir, and to discuss how blooming of M. aeruginosa is controlled in the reservoir and how MCs produced by Microcystis spread or accumulate in the aquatic environment.

Method

We monitored the water quality (temperature, salinity, dissolved inorganic nitrogen (DIN), and dissolved inorganic phosphorus) in the reservoir with seasonal blooming of microalgae including phytoplankton and M. aeruginosa using the concentrations of chlorophyll ?? and MCs, respectively, and collected the surface sediment in the reservoir and the bay to determine the MC content using the ELISA method.

Result

M. aeruginosa bloomed in extremely low DIN conditions of the water in warm seasons (spring and late summer to autumn). The year-mean standing stock of MCs was approximately 34.5?kg in the water and 8.4?kg in the surface sediment in the reservoir. Approximately 64.5?kg of MCs was discharged with the effluent to the bay in a year.

Conclusion

Since a large amount of MCs always suspends in the water in the reservoir and it has been discharged to the bay, suspension-feeding animals are exposed most seriously to the high levels of MCs occurring in these areas. We need to pay attention to the danger of widespread dispersal of MCs and biological concentration of MCs by fish and clam inside and outside the reservoir.     

Atmospheric mercury emissions from waste combustions measured by continuous monitoring devices

Atmospheric mercury emissions have attracted great attention owing to adverse impact of mercury on human health and the ecosystem. Although waste combustion is one of major anthropogenic sources, estimated emission might have large uncertainty due to great heterogeneity of wastes. This study investigated atmospheric emissions of speciated mercury from the combustions of municipal solid wastes (MSW), sewage treatment sludge (STS), STS with waste plastics, industrial waste mixtures (IWM), waste plastics from construction demolition, and woody wastes using continuous monitoring devices. Reactive gaseous mercury was the major form at the inlet side of air pollution control devices in all combustion cases. Its concentration was 2.0-70.6 times larger than elemental mercury concentration. In particular, MSW, STS, and IWM combustions emitted higher concentration of reactive gaseous mercury. Concentrations of both gaseous mercury species varied greatly for all waste combustions excluding woody waste. Variation coefficients of measured data were nearly equal to or more than 1.0. Emission factors of gaseous elemental mercury, reactive gaseous mercury, and total mercury were calculated using continuous monitoring data. Total mercury emission factors are 0.30 g-Hg/Mg for MSW combustion, 0.21 g-Hg/Mg for STS combustion, 0.077 g-Hg/Mg for STS with waste plastics, 0.724 g-Hg/Mg for industrial waste mixtures, 0.028 g-Hg/Mg for waste plastic combustion, and 0.0026 g-Hg/Mg for woody waste combustion. All emission factors evaluated in this study were comparable or lower than other reported data. Emission inventory using old emission factors likely causes an overestimation.     

An international comparative study of end-of-life vehicle (ELV) recycling systems

End-of-life vehicles (ELV) have become a global concern as automobiles have become popular worldwide. An international workshop was held to gather data and to discuss 3R policies and ELV recycling systems, their background and present situation, outcomes of related policies and programs, the framework of recycling and waste management, and case studies on related topics in several countries and regions, as well as the essential points of the comparison. Legislative ELV recycling systems are established in the EU, Japan, Korea, and China, while in the US, ELV recycling is managed under existing laws on environmental protection. Since automobile shredding residue (ASR) has a high calorific value and ash content, and includes heavy metals as well as a mass of unclassified fine particles, recycling ASR is considered highly difficult. Countries with a legislative ELV system commonly set a target for recovery rates, with many aiming for more than 95 % recovery. In order to reach this target, higher efficiency in ASR recovery is needed, in addition to material recycling of collectable components and metals. Environmentally friendly design was considered necessary at the planning and manufacturing stages, and the development of recycling systems and techniques in line with these changes are required for sound ELV management.     

Degradation pathways of decabromodiphenyl ether during hydrothermal treatment

The hydrothermal degradation pathways of decabromodiphenyl ether during hydrothermal treatment were investigated. After an initial "Heating time", the reaction runs were carried out at constant temperature (heating to 300 degrees C and keeping temperature) and pressure (8MPa) in a SUS316 stainless steel micro autoclave filled with water. Some decomposition of decabromodiphenyl ether was observed over 200 degrees C, and it was decomposed by more than 99% after 10 min at 300 degrees C. The reactivities of bromine on para and meta substituents were relatively high, while its reactivity on ortho bromine was extremely low. The formations of polybrominated dibenzo-p-dioxins and furans (PBDD/DFs) were observed in the early stages of the reactions at around 300 degrees C. The TCDD toxicity equivalency (TCDD-EQs) of the by-products was determined based on relative potencies (REPs EC(5TCDD)) with the Dioxin-Responsive-Chemical Activated Luciferase gene eXpression (DR-CALUX) bioassays technology. These results indicated that the risk of formation of PBDD/DFs in the hydrothermal degradation of deca-BDE was low, and it would be possible to reduce the TCDD-EQs value by adding some catalyst or alkali, or extending processing time.     

Spatial distribution and accumulation of brominated flame retardants, polychlorinated biphenyls and organochlorine pesticides in blue mussels (Mytilus edulis) from coastal waters of Korea

Blue mussels (Mytilus edulis) from 20 locations along the coastal waters of Korea were analyzed to elucidate the characteristic distribution and contamination status of polybrominated diphenyl ethers (PBDEs), hexabromocyclododecanes (HBCDs), polychlorinated biphenyls (PCBs) and organochlorine pesticides. To our knowledge, this is the first study to report on the contamination status of HBCDs from Korea. PBDEs and HBCDs were found in mussels at levels ranging from 6.6 to 440 and from 6.0 to 500 ng/g lipid wt., respectively. Concentrations of PBDEs in mussels from Korea were higher or comparable to available data in mussels from other countries. Among the organochlorine compounds (OCs) analyzed, levels of PCBs and DDTs were the highest followed by CHLs, HCHs and hexachlorobenzene. For all the compounds, higher concentrations were found in mussels from southeastern coast of Korea. The present study shows the importance of mussels as bioindicators for monitoring contaminants in coastal waters.     

Seasonal variation in the atmospheric deposition of inorganic constituents and canopy interactions in a Japanese cedar forest

The seasonal changes in throughfall (TF) and stemflow (SF) chemistry and the canopy interactions of K+ and N compounds were studied in a Japanese cedar forest near the Sea of Japan. The fluxes of most ions, including non-sea-salt SO4(2-), from TF, SF, and rainfall showed distinct seasonal trends, increasing from autumn to winter, owing to the seasonal west wind, while the fluxes of NH4+ and K+ ions from TF+SF might have a large effect of canopy interactions. The contact angle (CA) of water droplets on leaves decreased with leaf aging, suggesting that surface wettability increases with leaf age. The K+ concentration in TF was negatively correlated with the CA of 1-year-old leaves, while the NH4+ concentration was positively correlated with the CA. The net fluxes of NH4+ and NO3(-) from TF were positively correlated with the CA. The increase in wettability may accelerate leaching of K+ or uptake of NH4+.     

Decomposition of organochlorine compounds in flue gas from municipal solid waste incinerators using natural and activated acid clays

High-temperature particle control (HTPC) using a ceramic filter is a dust collection method without inefficient cooling and reheating of flue gas treatment; thus, its use is expected to improve the energy recovery efficiency of municipal solid waste incinerators (MSWIs). However, there are concerns regarding de novo synthesis and a decrease in the adsorptive removal efficiency of dioxins (DXNs) at approximately 300°C. In this study, the effect of natural and activated acid clays on the decomposition of monochlorobenzene (MCB), one of the organochlorine compounds in MSW flue gas, was investigated. From the results of MCB removal tests at 30–300°C, the clays were classified as adsorption, decomposition, and low removal types. More than half of the clays (four kinds of natural acid clays and two kinds of activated acid clays) were of the decomposition type. In addition, the presence of Cl atoms detached from MCB was confirmed by washing the clay used in the MCB removal test at 300°C. Activated acid clay was expected to have high dechlorination performance because of its proton-rich-composition, but only two clays were classed as decomposition type. Conversely, all the natural acid clays used in this work were of the decomposition type, which contained relatively higher di- and trivalent metal oxides such as Al₂O₃, Fe₂O₃, MgO, and CaO. These metal oxides might contribute to the catalytic dechlorination of MCB at 300°C. Therefore, natural and activated acid clays can be used as alternatives for activated carbon at 300°C to remove organochloride compounds such as DXNs. Their utilization is expected to mitigate the latent risks related to the adoption of HTPC, and also to contribute to the improvement of energy recovery efficiency of MSWI.

ImplicationsThe effect of natural and activated acid clays on MCB decomposition was investigated to evaluate their suitability as materials for the removal of organochlorine compounds, such as DXNs, from MSWI flue gas at approximately 300°C. More than half of the clays used in this study showed the decomposition characteristics of MCB. The presence of Cl atoms in the clay used in the MCB removal test at 300°C proved the occurrence of MCB decomposition. The results of this study suggest a novel flue gas treatment method to establish high-energy efficient MSWI systems.     

Levels and body distribution of polybrominated diphenyl ethers (PBDEs) and hexabromocyclododecanes (HBCDs) in freshwater fishes from the Yangtze River, China

Polybrominated diphenyl ethers (PBDEs) and hexabromocyclododecanes (HBCDs) were determined in muscle, liver and eggs of freshwater fishes from the lower reach of the Yangtze River, China. The present study is the first to report HBCD concentrations in the environment of China. The concentrations of PBDEs and HBCDs in muscle of freshwater fishes from the Yangtze River ranged from 18 to 1100ng/g and 12 to 330ng/g lipid weight (wt.), respectively. When compared with other regions of the world, the contamination of PBDEs in biota could be regarded as moderate, whereas contamination of HBCDs in biota was relatively high. The PBDE congener profiles in fishes of the present study were markedly different from those observed in freshwater and marine fishes from other regions of the world. In the present study, BDE-15, BDE-28 and BDE-47 were the predominant congeners in the fishes. This particular congener profile in fishes from the Yangtze River revealed that a specific commercial PBDE formulation (probably made in China) might have been used in the Yangtze River Delta region.