Rate of hexabromocyclododecane decomposition and production of brominated polycyclic aromatic hydrocarbons during combustion in a pilot-scale incinerator

Here, we examined the incineration of extruded polystyrene containing hexabromocyclododecane(HBCD) in a pilot-scale incinerator under various combustion temperatures(800–950℃) and flue gas residence times(2–8 sec). Rates of HBCD decomposition ranged from 99.996%(800℃, 2 sec) to 99.9999%(950℃, 8 sec); the decomposition of HBCD, except during the initial stage of combustion(flue gas residence time 2 sec), followed a pseudo-first-order kinetics model. An Arrhenius plot revealed that the activation energy and frequency factor of the decomposition of HBCD by combustion were 14.2 kJ/mol and 1.69 sec~(-1),respectively. During combustion, 11 brominated polycyclic aromatic hydrocarbons(BrPAHs)were detected as unintentional by-products. Of the 11 BrPAHs detected, 2-bromoanthracene and 1-bromopyrene were detected at the highest concentrations. The mutagenic and carcinogenic BrPAHs 1,5-dibromoanthracene and 1-bromopyrene were most frequently detected in the flue gases analyzed. The total concentration of BrPAHs exponentially increased(range,87.8–2,040,000 ng/m~3) with increasing flue gas residence time. Results from a qualitative analysis using gas chromatography/high-resolution mass spectrometry suggest that bromofluorene and bromopyrene(or fluoranthene) congeners were also produced during the combustion.     

Production characteristics of lipopeptide antibiotics in biofilm fermentation of Bacillus subtilis

In biofilm fermentation, from the very early moments, surfactin was produced along with the biofilm development in the lipopeptide antibiotic production medium by using Bacillus subtilis. However, almost no iturin A was produced in its first 24 hours of cultivation and the production of iturin A began much later. Volumes of the nutrient medium and available surface area of the biofilm reactors were found to be important with the relative production of these two antibiotics. Production of iturin A was increased from 12 mg to about 50 mg per reactor when the culture size was increased from 5 mL to 20 mL, as the depth of the medium was increased. The production level was saturated thereafter with larger volumes. On the other hand, surfactin production was remained similar, which was about 10 mg per reactor, from all the 5 mL to 80 mL of biofilm culture. Optimized temperature for iturin A and surfactin production was observed at 25 and 37°C, respectively. In the biofilm fermentation, production of surfactin was increased when the incubation temperature was increased within the temperature range of 25 to 37°C, on the other hand, iturin A production was gradually decreased with the increase of the incubation temperature.     

Screening of endophytic bacteria against fungal plant pathogens

Bacterial endophytes were found from 6 plant leaves among 35 plant leaves screened. Two of the isolated bacteria showed antagonistic activity against fungal plant pathogens. An isolate named KL1 showed the clear inihibition against plant pathogens, Fusarium oxysporum and Rhizoctonia solani, on PDA as well as TSA plate. Supernatant of the bacterial culture also showed the clear inhibition against the fungal growth on the plate and the antibiotic substance was identified as iturin A by HPLC analysis. KL1 was identified as Bacillus sp. from the 16S rRNA gene analysis. Very thin hyphae of R. solani was miccroscopically observed when the fungus was co-cultivated with KL1.     

Application of malt residue in submerged fermentation of Bacillus subtilis

Malt residue is a common waste or byproduct from beer industries after brewing and milling of malted barley. In this work, Bacillus subtilis RB14 was used to study the microbial growth and production of secondary metabolites like lipopeptide antibiotic iturin A in the malt residue for its effective recycling. B. subtilis RB14 could grow in submerged fermentation of malt residue and significant growth (10⁹ CFU/mL) was observed without any supplementation. In submerged fermentation iturin A production using malt residue was about 170 mg/L, which was found to be higher than its production in No.3 (Polypepton, glucose, KH₂PO₄, MgSO₄·7H₂O) medium where production was about 120 mg/L. More than 600 mg/L of iturin A production was observed when malt residue was combinedly used with No.3 medium. This production was significantly higher than their summation of their individual production. However, the growth of B. subtilis in combined medium was found to be similar to that of the submerged fermentation in simple malt residue. Therefore, the remarkable enhancement in production of iturin A in supplemented malt residue was attributed to the nutrients supplied from No.3 medium.     

Consideration on safety for emerging technology – Case studies of seven service robots

Despite the fact that several manufacturers of service robots launched their innovations into the market, worldwide guidelines or regulations concerning the safety aspects of service robots are not yet available. However the general principles and methodologies of safety of machinery (e.g., ISO/IEC Guide 51, partly ISO14121, ISO12100) could be implemented to a certain degree. The safety of seven service robots as an emerging technology was verified by safety professionals of “NPO – the Safety Engineering Laboratory” a Non Profit Organization. NPO verified the “Critical Hazards” for each service robot mentioned by the respective manufacturers. For those cases, both the “As Low As Reasonably Practicable” principle and the “Reasonable Alternative Design” standard were applied for judging if the risk associated with the Critical Hazards were tolerable or not and if state of the art measures for reducing the risk were applied adequately. These experiences will help to establish guidelines for the safety of service robots as an emerging technology in the future.     

Re-evaluation of the colorimetric assay for cytidine deaminase activity

This study re-evaluated the colorimetric assay for cytidine deaminase (CTD), and showed that the optimum conditions were pH 7·5, 37°C, and up to 24 h. In addition, this method was found to require protein precipitation. Following these modifications, intra-assay and inter-assay coefficients of variation were below 5 per cent, indicating that the assay was highly reliable. CTD activity was determined in 282 serum samples from 206 normal pregnant women by the incubation of 100 μl of serum and 400 μl of 1·4 mmol/l cytidine substrate for 16 h at 37°C. Following protein precipitation, the ammonia liberated during conversion was measured by a colorimetric procedure. The mean (±SD) CTD activity was 7·31 ± 2·50 U at 3–12 weeks of gestation, 8·70 ± 2·12 U at 13–24 weeks, 7·59 ± 2·25 U at 25–36 weeks, and 7·29 ± 2·16 U at 37–42 weeks. High levels of CTD activity were found in patients with abruptio placentae and amnionitis associated with intrauterine fetal death (IUFD). The increase in CTD activity was noted from 3 days to 1 week before the confirmation of IUFD. The placenta contains extremely high levels of CTD, but cord serum does not. Thus, the excessive elevation of CTD activity was probably derived from progressive placental damage. This modified CTD assay was concluded to be simple and reliable, and may perhaps be useful in detecting pregnancy disorders.     

Trans-Pacific dispersal of loggerhead turtle hatchlings inferred from numerical simulation modeling

We used Lagrangian numerical simulations to examine the trans-Pacific dispersal processes of loggerhead turtle hatchlings. Ten thousand simulated particles were released from each of the three nesting regions in Japan and tracked for 5 years. Results showed many particles moving eastward, drifting in the Kuroshio Current followed by the Kuroshio Extension Current. However, no particles reached Baja California, a known feeding area, through passive processes, indicating that trans-Pacific transportation requires active swimming by turtles. The duration of the trans-Pacific dispersal was estimated to be at least 1.6–3.4 years, with some turtles drifting in the Kuroshio Countercurrent and remaining in the western Pacific even after 5 years. This indicates that as revealed by previous genetic studies, not all loggerheads always disperse along a trans-Pacific route. The findings showed that survival and expected growth rates varied widely according to ambient temperatures during drifting, which in turn depended on nesting location.