基于热带海洋大气环境下机载PCB板的环境适应性对比研究

目的 通过机载PCB板(Printed Circuit Board,PCB)在热带海洋大气环境下的腐蚀老化特征和电气性能退化规律分析,研究其在热带海洋大气环境下的环境适应性。方法 根据热带海洋大气环境中PCB板的实际使用环境大多为舱室内部封闭或半封闭的情况,分别设计并开展海南万宁海洋平台棚下暴露场和某海域环境户外简易遮蔽玻璃框下3 a的自然环境试验。结果 PCB板的焊点、焊盘、印制导线以及引线头等部位在2种试验环境中均出现了不同程度的腐蚀破坏,试验后期,所有部位的腐蚀程度全部达到了4级,导通电阻从几十毫欧增大至几十兆欧,绝缘电阻从10 GΩ以上降低至几兆欧。结论 在万宁站试验2 a和某海域试验3 a后,PCB板均不满足耐电压的技术要求(500 V交流电压60 s),万宁海洋平台棚下暴露场对PCB板的环境适应性更为严酷。     

汽车零部件金属卤素灯阳光模拟试验与户外自然曝晒的相关性研究

目的 探究汽车零部件金属卤素灯阳光模拟加速试验与户外自然曝晒的关系。方法 使用3种典型高分子透明材料分别进行阳光模拟加速试验、AIMBOX/Arizona户外曝晒和Florida户外曝晒,基于试验后样品的黄变值,比较阳光模拟试验与户外曝晒的相关性,并对阳光模拟试验与户外曝晒的加速性进行探讨。结果 阳光模拟（IP/DP箱）加速试验与AIM BOX/Arizona户外曝晒高度相关,综合加速倍率约是AIM BOX/Arizona户外曝晒的3倍。阳光模拟（IP/DP箱外）加速试验与Florida户外曝晒高度相关,综合加速倍率是Florida户外曝晒的7倍。结论 基于3种典型材料研究可知,汽车零部件阳光模拟加速试验与典型户外自然曝晒具有一定相关性。     

皂角苷和柠檬酸联合对市政污泥中重金属的去除与风险评价

污泥的重金属污染严重制约其资源化利用,为探讨皂角苷和柠檬酸联合淋洗去除污泥中重金属的效果,为污泥的资源化利用提供理论依据,以武汉市4个市政污泥样品(S1、S2、S3、S4)为研究对象,选取1％的皂角苷和0.1 mol/L的柠檬酸联合淋洗1?4次,对淋洗前后污泥中重金属Cu、Ni、Pb、Zn、Cd和Cr的含量和形态进行了...     

舰船环境适应性设计方法探索与实践

探索舰船环境适应性的设计方法,以提高舰船在各种复杂环境下的适应能力。分析了舰船环境适应性设计中面临的若干问题和改进提高方向,参考借鉴国内外航空航天、电子等行业成功经验,提出了指导舰船环境适应性设计的主要设计原则和工作内容。围绕改善环境条件、加强耐环境能力设计这2个方面,提出了3种环境适应性设计方法,包括基于规范的设计方法、基于环境仿真的设计方法、基于预使用验证的设计方法。根据舰船风浪环境适应性设计的特点和要求,选择采用环境仿真和模型试验技术开展了应用研究。基于分析结果,提出了增加水线面系数、调整浮心、优化线型等多项改进措施建议。采用环境仿真和模型试验相结合的方式,可有效支撑舰船风浪环境适应性设计和评估,这一方法具有较高的工程推广应用价值。另外,未来应加大环境仿真技术的研究和应用力度,尝试开展多因素综合环境仿真,以进一步提高舰船的环境适应性。     

风险评价标准值初探

提出了风险指标和ALARP原则的含义,从风险评价的ALARP原则出发,得出个人风险评价标准值和社会风险评价标准值的制定方法。     

温度交变下液态乙烷回气管线热应力数值计算与现场测试*

为解决低温交变载荷下液态乙烷回气管线面临的安全问题,采用有限元法和现场试验研究管线在低温交变载荷下无裂纹和含轴向裂纹管线的热应力分布。结果表明:管内温度沿周向和轴向分布具有较大的不均匀性,内外壁温度分布趋势基本相似;随着计算时间的延长,管线整体热应力先增大再减小;卸压、温度回升过程中,管内温差逐渐减小,热应力逐渐减小;裂纹处的热应力大于远离裂纹及无裂纹处的热应力;对管线热应力变化进行现场监测,试验数据与仿真结果吻合。研究结果可为低温情况下液态乙烷回气管线的方案设计提供参考和指导。     

Fixation and partitioning of heavy metals in slag after incineration of sewage sludge

Fixation of heavy metals in the slag produced during incineration of sewage sludge will reduce emission of the metals to the atmosphere and make the incineration process more environmentally friendly. The effects of incineration conditions (incineration temperature 500-1100°C, furnace residence time 0-60min, mass fraction of water in the sludge 0-75%) on the fixation rates and species partitioning of Cd, Pb, Cr, Cu, Zn, Mn and Ni in slag were investigated. When the incineration temperature was increased from 500 to 1100°C, the fixation rate of Cd decreased from 87% to 49%, while the fixation rates of Cu and Mn were stable. The maximum fixation rates for Pb and Zn and for Ni and Cr were reached at 900 and 1100°C, respectively. The fixation rates of Cu, Ni, Cd, Cr and Zn decreased as the residence time increased. With a 20min residence time, the fixation rates of Pb and Mn were low. The maximum fixation rates of Ni, Mn, Zn, Cu and Cr were achieved when the mass fraction of water in the sludge was 55%. The fixation rate of Cd decreased as the water mass fraction increased, while the fixation rate of Pb increased. Partitioning analysis of the metals contained in the slag showed that increasing the incineration temperature and residence time promoted complete oxidation of the metals. This reduced the non-residual fractions of the metals, which would lower the bioavailability of the metals. The mass fraction of water in the sludge had little effect on the partitioning of the metals. Correlation analysis indicated that the fixation rates of heavy metals in the sludge and the forms of heavy metals in the incinerator slag could be controlled by optimization of the incineration conditions. These results show how the bioavailability of the metals can be reduced for environmentally friendly disposal of the incinerator slag.     

Characterization and control of odorous gases at a landfill site: a case study in Hangzhou, China

Municipal solid waste (MSW) landfills are one of the major sources of offensive odors potentially creating annoyance in adjacent communities. At the end of May 2007, an odor pollution incident occurred at the Tianziling landfill site, Hangzhou, China, where the residents lodged complaints about the intense odor from the landfill, which drew a significant attention from the government. In this study, ambient air monitoring was conducted at the Tianziling landfill site. The main odor composition of the gas samples collected on June 1st 2007 and the reduction of various odorous gases from the samples collected on June 1st 2009 due to the applied odor control techniques were determined using gas chromatography-mass spectrometry (GC-MS). In addition, variations of primary odorous gaseous (NH₃ and H₂S) concentrations at different locations in the landfill site from July 2007 to June 2009 were also investigated by using classical spectrophotometric methods. Results showed that a total of 68 volatile compounds were identified among which H₂S (56.58-579.84 μg/m³) and NH₃ (520-4460 μg/m³) were the notable odor components contributing to 4.47-10.92% and 83.91-93.94% of total concentrations, respectively. Similar spatial and temporal shifts of H₂S and NH₃ concentrations were observed and were significantly affected by environmental factors including temperature, air pressure and wind direction. Odor pollution was worse when high temperature, high humidity, low air pressure, and southeast, northeast or east wind appeared. Moreover, the environmental sampling points of the dumping area and the leachate treatment plant were found to be the main odor sources at the Tianziling landfill site. The odor control technologies used in this project had a good mitigating effect on the primary odorous compounds. This study provides long-term valuable information concerning the characteristics and control of odors at landfill sites in a long run.     

河南省节能环保产业发展对策研究

节能环保产业是跨行业、涵盖面宽的综合性产业,其产业关联度大,带动力强,是国家确定的战略性新兴产业。河南省是新兴工业大省和资源消费大省,经济发展与资源环境承载力之间的矛盾日益突出,发展节能环保产业势在必行。本文分析了河南省节能环保产业的发展现状和存在的突出问题,提出了发展河南省节能环保产业的重点领域和推进路径。     

遥感技术在基层环境监测单位的常见应用

卫星遥感成为环境监测的新手段,基层环保部门由于受技术装备、知识储备、资金的限制,只能开展部分工作。文章介绍了常见的数据源,基层单位可开展的常见工作及取得的工作经验。期望为广大环保基层单位在现有条件下开展遥感环境监测工作提供参考。