Concentrations of Heavy Metals in Hair and Nails of Young Pakistanis: Correlation with Dietary Elements

Hair and nail samples from young Pakistani adults were separately analyzed for quantification of Cd, Cr, Cu, Ni, Pb, and Zn concentrations. The concentrations of these metals were also analyzed in commonly consumed local foods to evaluate potential correlation of hair and nail concentrations with diet. Pearson correlation coefficients ranged from 0.349 to 0.999, demonstrating diet to be a significant contributor for accumulation of heavy metals in humans.     

Distribution, correlation, and source apportionment of selected metals in tannery effluents, related soils, and groundwater—a case study from Multan, Pakistan

The short-term responses of H₂O₂-depletion-related parameters in moss Hypnum plumaeforme to the combined stress induced by Pb and Ni were investigated. The results showed that the Pb and Ni stress induced dose-dependent accumulation of hydrogen peroxide (H₂O₂). The increase of peroxidase (POD) activity and decrease of ascorbate peroxidase (APX) activity were observed under the combined heavy metal application. The antioxidants, ascorbate (AsA) and proline content, increased significantly when the metals were applied together. The study indicated that the cell damage caused by Pb stress was higher than that caused by Ni stress, Pb and Ni had synergistic effect in inducing the oxidative stress in moss H. plumaeforme, especially under the combination of high concentration of Ni (0.1 and 1.0 mM) and Pb. Content of proline, H₂O₂ and the activity of POD, all showed a dose-dependent increase under Pb and Ni stress, suggesting their practical value as biomarkers in moss biomonitoring, especially in the case of light pollution caused by heavy metals without the changes in the appearance of mosses.     

Effect of land use activities on PAH contamination in urban soils of Rawalpindi and Islamabad, Pakistan

Urbanization can increase the vulnerability of soils to various types of contamination. Increased contamination of urban soils with polycyclic aromatic hydrocarbon (PAH) could relate to increased number of petrol pump stations and mechanical workshops—a phenomenon that needs to be constantly monitored. This study was undertaken to explore the soil PAH levels in Rawalpindi and Islamabad urban areas in relation to land use activities. Composite soil samples from petrol pump stations and mechanical workshops (n?=?32) areas were evaluated for five PAHs––naphthalene, phenanthrene, pyrene, benzo[a]pyrene, and indeno(1,2,3-cd)pyrene—and compared with control area locations with minimum petroleum-related activity (n?=?16). Surface samples up to 3 cm depth were collected and extraction of analytes was carried out using n-hexane and dichloromethane. Prior to running the samples, standards (100 μg ml^–1) were run on HPLC to optimize signal to noise ratio using acetonitrile as mobile phase at a flow rate of 1.25 ml/min at 40 °C. Significant differences between petrol pump stations and mechanical workshop areas were observed for individual PAH as well as with control area soil samples. Naphthalene was found to be the most abundant PAH in soil, ranging from 2.47 to 24.36 mg kg^–1. Correlation between the benzo[a]pyrene (BaP) level in soil and the total PAH concentration (r?=?0.82, P?<?0.0001) revealed that BaP can be used as a potential marker for PAH pollution. A clear segregation between petrogenic and pyrogenic sources of contamination was observed when low molecular weight PAHs detected in soil was plotted against high molecular weight PAHs. The former source comprised lubricants and used engine oil found at mechanical workshops, whereas the latter could be mostly attributed to vehicular emission at petrol pumps. The results indicate that PAH contamination in urban areas of Rawalpindi and Islamabad has direct relevance with land use for petroleum activity. We conclude that in order to reduce the soil PAH exposure in urban environment, petrol pumps and mechanical workshops must be shifted to less densely populated areas because of their role as important point sources for PAH emission.     

Anaerobic bioconversion of carbon dioxide to biogas in an upflow anaerobic sludge blanket reactor

The increasing concentration of carbon dioxide (CO2)--the most dominant component of greenhouse gases--in the atmosphere has been of growing concern for many years. Many methods focus on CO2 capture and storage and there is always the risk of CO2 release to the environment. In this study, a new method to convert CO2 to biogas with a high content of methane (CH4) in an anaerobic system with a lab-scale upflow anaerobic sludge blanket reactor at 35 degrees C was developed. In a series of experiments, the reactor was run with and without CO2-saturated solutions including volatile fatty acids (VFAs) as sources of hydrogen. The concentration of dissolved CO2 in the influent solutions was 2.2-6.1 g/L, with corresponding chemical oxygen demand (COD) values of 2.6-8.4 g/L for the solutions. Overall CO2 removal values of 2.7-20 g/day (49-88% conversion) were obtained for the organic loading rates (OLR) and CO2 loading rates of 8-36 gCOD/L day and 6-26 gCO2/L x day, respectively with CH4 purity of above 70%. Also, VFA and COD removal were in the range of 79-95% and 75-90%, respectively. Methanogenic activities of the cultures with the concentrations measured as volatile suspended solids (VSSs) were 0.12-0.40 L CH4/gVSS x d with the highest value for the system containing acetic acid. This anaerobic method can be applied to reduce CO2 emitted to the atmosphere from a wide variety of industrial point sources with a value-added product, CH4.     

Antimony (Sb) – pollution and removal techniques – critical assessment of technologies

In view of increasing emissions of antimony (Sb) into the environment due to industrialization and consequent carcinogenicity, it is essential to remove this metal from the ecosystem. Antimony and arsenic (As) are analogs. Although numerous studies examined arsenic removal, few reports are available on Sb removal. In this review, various Sb removal techniques are described to understand how this process occurs and what research gaps are needed to improve efficiency. At present, surface adsorption technique is the most widely used for Sb removal. Biological treatment namely phytoremediation is also a promising method and more investigations are required in this regard. The selection of a suitable technique for a given area depends on the conditions including economic, environmental, and social conditions.     

Mechanisms of copper toxicity in the shore crab,Carcinus maenas

The influence of copper(II)chloride on selected key enzymes and metabolites in intermediary metabolism and the energy charge potential of the hyperregulating shore crab, Carcinus maenas (L.) were investigated. Crabs, collected in Odense Fjord, Denmark between September 1989 and May 1990, were exposed to 10 ppm copper(II)chloride, in 10 ppt salinity seawater at 15°C for up to 1 wk. Hexokinase activity was 77% lower in the posterior gills and 60% lower in the midgut gland than in control crabs. Phosphofructokinase activity was reduced in the midgut gland by 82% but was unaffected in the gills. Pyruvate kinase activity was undetectable in the gills of exposed crabs and reduced by 47% in the midgut gland. Citrate synthase activity was depressed by 30% in the posterior gills and unaffected in other tissues. Copper exposure had no apparent effect on tissue cytochrome c oxidase activity. Chela muscle was the only tissue in which copper exposure did not bring about reductions in the enzyme activities tested. As a result of 1 wk of copper exposure the average lactate level increased by 3.5-fold in haemolymph, 9.3-fold in posterior gills and 6.5-fold in midgut gland. The average glucose level was raised by a factor of 6 in the haemolymph, 3.4 in the posterior gills and 1.2 in the midgut gland. Energy charge potential was at a very high level (ca. 0.9) and was unaffected by copper exposure.     

Movement patterns of young Caribbean reef sharks, Carcharhinus perezi, at Fernando de Noronha Archipelago, Brazil: the potential of marine protected areas for conservation of a nursery ground

The movement patterns and long-term site-fidelity of primarily juvenile Caribbean reef sharks, Carcharhinus perezi, were investigated using tag-recapture and automated telemetry at an insular nursery area, the Fernando de Noronha Archipelago, Brazil. Of the 143 externally tagged juvenile sharks (<110 cm), 22 (15.3%) were recaptured between 0 and 5 km from the site of tagging after 5–800 days at liberty, suggesting some site-fidelity in young individuals of this species. Site-fidelity and movement patterns of ten juvenile sharks ranging from 78 to 110 cm total length (TL) and one opportunistically captured adult female (224 cm TL) were also investigated for periods of up to 2 years with an array of automated telemetry receivers. Tagging and telemetry data from both inside and outside a marine protected area (MPA) show that shark abundance and activity is greatest along the part of the archipelago’s coastline least disturbed by human activity. Telemetry tracking also showed that juvenile reef sharks demonstrated a high degree of site-fidelity and occupied specific locations along the coast throughout the year, with some evidence of an increase in activity space with ontogeny. Sharks appeared to range more widely at night and there were no seasonal variations in habitat use. Our results suggest that MPAs may be a useful conservation tool to protect young C. perezi and potentially other reef-dwelling carcharhinid sharks during their early life history.     

Wind speed pattern data and wind energy potential in Pakistan: current status,challenging platforms and innovative prospects

Environmental Science and Pollution Research - Energy is an essential parameter for the economic growth and sustainable development of any country. Due to the rapid increase in energy demand,...     

Quantitative sustainability assessment of remanufacturing waste reinforcing steel

Construction is a major contributor to the solid waste stream globally and various recycling strategies are being evaluated to recover valuable resources. As a novel strategy, remanufacturing waste reinforcing steel bar (rebar) pieces from concrete waste to produce nails was applied on an industrial scale to prove the technical feasibility, where a group of alternatives were developed based on commercially available industrial machinery. The calculated economic and environmental feasibility values are sufficiently high for industrial application, and the most appropriate remanufacturing technological alternative was identified. The sustainability equation was solved to find the social feasibility and overall remanufacturing sustainability index. Rebar waste remanufacturing has a high triple-bottom-line sustainability index of 0.885. Based on the proposed process, small remanufacturing companies can be developed, thereby aiding employment and human development by earning profit of 1904–8880 USD/day. The findings of this study are beneficial to decision makers in government and industry and are globally relevant because concrete waste is ubiquitous worldwide.