Seasonal variation in the atmospheric deposition of inorganic constituents and canopy interactions in a Japanese cedar forest

The seasonal changes in throughfall (TF) and stemflow (SF) chemistry and the canopy interactions of K+ and N compounds were studied in a Japanese cedar forest near the Sea of Japan. The fluxes of most ions, including non-sea-salt SO4(2-), from TF, SF, and rainfall showed distinct seasonal trends, increasing from autumn to winter, owing to the seasonal west wind, while the fluxes of NH4+ and K+ ions from TF+SF might have a large effect of canopy interactions. The contact angle (CA) of water droplets on leaves decreased with leaf aging, suggesting that surface wettability increases with leaf age. The K+ concentration in TF was negatively correlated with the CA of 1-year-old leaves, while the NH4+ concentration was positively correlated with the CA. The net fluxes of NH4+ and NO3(-) from TF were positively correlated with the CA. The increase in wettability may accelerate leaching of K+ or uptake of NH4+.     

Digestion performance and microbial community in full-scale methane fermentation of stillage from sweet potato-shochu production

Sweet potato shochu is a traditional Japanese spirit produced mainly in the South Kyushu area in Japan. The amount of stillage reaches approximately 8 × 105tons per year. Wastewater mainly containing stillage from the production of sweet potato-shochu was treated thermophilically in a fullscale treatment plant using fixed-bed reactors(8 reactors × 283 m3). Following the addition of Ni2+ and Co2+, the reactors have been stably operated for six years at a high chemical oxygen demand(COD) loading rate of 14 kg/(m3·day). Analysis of coenzyme content and microbial communities indicated that similar microbial communities were present in the liquid phase and on the fiber carriers installed in reactors. Bacteria in the phyla Firmicutes as well as Bacteroidetes were dominant bacteria, and Methanosarcina thermophila as well as Methanothermobacter crinale were dominant methanogens in the reactors. This study reveals that stillage from sweet potato-shochu production can be treated effectively in a full-scale fixed-bed reactor under thermophilic conditions with the help of Ni2+and Co2+. The high diversity of bacterial community and the coexistence of both aceticlastic and hydrogenotrophic methanogens contributed to the excellent fermentation performance.     

A Geographic Information System (GIS)-based approach to adaptation to regional climate change: a case study of Okutama-machi,Tokyo, Japan

Recently, local governments have an increasing need to take extensive and effective local measures to adapt to regional climate change, but have difficulty knowing how and when to adapt to such change. This study aims: 1) to characterize an efficient and cost-effective database management tool (DMT) for developing a Geographic Information System (GIS) based approach to using observed and projected data, for decision-making by non-expert government authorities, and 2) to document how DMT can be used to provide specialized yet understandable climate change information to assist local decision-makers in clarifying regional priorities within a wide array of adaptation options. The DMT combines climate change mapping, statistical GIS, and a vulnerability assessment. Okutama-machi, a 225.63 km² sparsely populated mountainous region (2012 population 5,856) northwest of Tokyo, Japan, was chosen for this pilot study. In this paper, the most recent regional climate projections (5 km resolution) are transcribed into an understandable form for use by non-expert citizens who use the GIS-based DMT. Results illustrate qualitative agreement in projection of summer daily mean temperatures; the mean temperature increase at Okutama-machi is the greatest of any area in Tokyo. In comparing near future and future conditions, August monthly mean temperature will increase more than 0.7–0.9 °C and 2.8–2.9 °C, and monthly precipitation by 50 % and 25–41 %, respectively. However, the root mean square (RMS) errors and bias of percentage change for monthly precipitation in summertime are 26.8 % and 4.3 %, respectively. These data provide an early warning and have implications for local climate policy response.     

Fate of radiocesium in sewage treatment process released by the nuclear accident at Fukushima

The nuclear accident at the Fukushima Daiichi Nuclear Power Plant (FDNPP) which occurred after the Great East Japan Earthquake on March 11, 2011 resulted in releases of radionuclides such as ¹³⁴Cs (half-life:T_1/2 = 2.06 yr), ¹³⁷Cs (T_1/2 = 30.04 yr) and ¹³¹I (T_1/2 = 8.05 d) to the environment. For this paper, we observed the monthly variations of radiocesium (¹³⁴Cs and ¹³⁷Cs) and stable Cs concentrations in influent, effluent, sewage sludge, and sludge ash collected from a sewage treatment plant 280 km north of the FDNPP from July to December, 2011. Using the stable Cs results, we concluded the mass balance of Cs in the sewage treatment plant showed that about 10% of the Cs entering the sewage treatment plant would be transferred to the sewage sludge, and then Cs in the sewage sludge was totally recovered in the sludge ash. The behavior of Cs was similar to that of Rb, but it was not similar to that of K in the sewage treatment process.     

Modeling the effects of ozone on soybean growth and yield

A simple mechanistic model was developed based on an existing growth model in order to address the mechanisms of the effects of ozone on growth and yield of soybean [Glycine max. (L.) Merr. 'Davis'] and interacting effects of other environmental stresses. The model simulates daily growth of soybean plants using environmental data including shortwave radiation, temperature, precipitation, irrigation and ozone concentration. Leaf growth, dry matter accumulation, water budget, nitrogen input and seed growth linked to senescence and abscission of leaves are described in the model. The effects of ozone are modeled as reduced photosynthate production and accelerated senescence. The model was applied to the open-top chamber experiments in which soybean plants were exposed to ozone under two levels of soil moisture regimes. After calibrating the model to the growth data and seed yield, goodness-of-fit of the model was tested. The model fitted well for top dry weight in the vegetative growth phase and also at maturity. The effect of ozone on seen yield was also described satisfactorily by the model. The simulation showed apparent interaction between the effect of ozone and soil moisture stress on the seed yield. The model revealed that further work is needed concerning the effect of ozone on the senescence process and the consequences of alteration of canopy microclimate by the open-top chambers.     

Disturbance caused by various fluctuating single noises and combined community noises

Three experiments were conducted to investigate factors influencing the (rated) disturbance caused by various noises to subjects when they were reading: (a) comparison of disturbances from various noises at 70 dB(A) L_eq; (b) comparison of exposure-response relationships between road traffic, aircraft, and train noises; and (c) the effect of road traffic background noise on the total disturbance caused by combined noise (aircraft or train noise combined with road traffic noise). From the three experiments, the following conclusions were drawn: (1) High-level components such as peak level contributed to the disturbance, since the noise was more disturbing with the increase of peak level. (2) Although the general pattern of the exposure-response relationships for aircraft and train noises was similar, the disturbance due to road traffic noise increased with L_eq level more rapidly than for aircraft and train noise. Considering that the peak level of aircraft or train noise was always higher than that of road traffic noise at equal L_eq levels, the contribution of the high-level components to the disturbance appeared to be level-dependent. (3) The background noise level did not affect the total disturbance. Because the high-level components of combined noises were almost the same, this finding was consistent with conclusions drawn in (1) and (2).     

Methods of statistical analysis of quantitative data obtained by toxicological bioassays using rodents in Japan: historical transition of the decision tree

Massive amounts of quantitative data are being obtained by toxicity tests with time. These data sometimes include the data with a different distribution pattern or with different numbers of animals in each group. The tree-type algorithm has long been used commonly to promptly analyze the difference between the control group and dosage groups. In Japan, the decision tree has been used since 1982 with several modifications of the initial procedure. Recently, the method has been revised to have a high power. The changes have been made in two directions; one is a sophisticated method and the other is a simplified method. In this paper, the historical transition of the decision tree is described and the future of the decision tree forecasted.     

Production and characterization of KOH-activated carbon derived from polychlorinated biphenyl residue generated by the sodium dispersion process

Polychlorinated biphenyl (PCB) residues from the sodium dispersion (SD) process were employed as the raw materials for the production of activated carbon using KOH activation. The pore properties, such as the specific surface area and pore size distribution, were characterized using the Barrett–Joyner–Halenda method and the Horvath–Kawazoe method based on the N₂ adsorption isotherm at 77 K. The activated carbon produced showed similar adsorption capacities and specific surface areas to the commercially available product. The effects of the activation conditions on the porosity of the activated carbon produced were studied. The most significant factor affecting the specific surface proved to be the activation temperature. The activated carbon produced from PCB residues from the high-temperature (423–443 K) SD process had a binary pore size distribution well developed in the 4 nm region and in the micropore region. The pore structure of the carbon produced from PCB residues from the low-temperature (333–393 K) SD process had a wide range of micropores and mesopores.