High temperature air-blown woody biomass gasification model for the estimation of an entrained down-flow gasifier

A high temperature air-blown gasification model for woody biomass is developed based on an air-blown gasification experiment. A high temperature air-blown gasification experiment on woody biomass in an entrained down-flow gasifier is carried out, and then the simple gasification model is developed based on the experimental results. In the experiment, air-blown gasification is conducted to demonstrate the behavior of this process. Pulverized wood is used as the gasification fuel, which is injected directly into the entrained down-flow gasifier by the pulverized wood banner. The pulverized wood is sieved through 60 mesh and supplied at rates of 19 and 27kg/h. The oxygen-carbon molar ratio (O/C) is employed as the operational condition instead of the air ratio. The maximum temperature achievable is over 1400K when the O/C is from 1.26 to 1.84. The results show that the gas composition is followed by the CO-shift reaction equilibrium. Therefore, the air-blown gasification model is developed based on the CO-shift reaction equilibrium. The simple gasification model agrees well with the experimental results. From calculations in large-scale units, the cold gas is able to achieve 80% efficiency in the air-blown gasification, when the woody biomass feedrate is over 1000kg/h and input air temperature is 700K.     

Occurrence of tributyltin (TBT)-resistant bacteria is not related to TBT pollution in Mekong River and coastal sediment: with a hypothesis of selective pressure from suspended solid

Tributyltin (TBT) is organotin compound that is toxic to aquatic life ranging from bacteria to mammals. This study examined the concentration of TBT in sediment from and near the Mekong River and the distribution of TBT-resistant bacteria. TBT concentrations ranged from <2.4 to 2.4 ng/g (dry wt) in river sediment and <2.4-15 ng g(-1) (dry wt) in harbor sediment. Viable count of total bacteria ranged from 2.0 x 10(4) to 1.4 x 10(7)cfu/g, and counts of TBT-resistant bacteria ranged <1.0 x 10(2) to 2.5 x 10(4)cfu/g. The estimated occurrence rate of TBT-resistant bacteria ranged from <0.01 to 34% and was highest in upstream sites in Cambodia. The occurrences of TBT in the sediment and of TBT-resistant bacteria were unrelated, and chemicals other than TBT might induce TBT resistance. TBT-resistant bacteria were more abundant in the dry season than in the rainy season. Differences in the selection process of TBT-resistant bacteria between dry and rainy seasons were examined using an advection-diffusion model of a suspended solid (SS) that conveys chemicals. The estimated dilution-diffusion time over a distance of 120 km downstream from a release site was 20 days during dry season and 5 days during rainy season, suggesting that bacteria at the sediment surface could be exposed to SS for longer periods during dry season.     

Source-specific sewage pollution detection in urban river waters using pharmaceuticals and personal care products as molecular indicators

Environmental Science and Pollution Research - Source-specific elucidation of domestic sewage pollution caused by various effluent sources in an urban river water, as conducted for this study,...     

Statistical tools for analysing the data obtained from repeated dose toxicity studies with rodents: a comparison of the statistical tools used in Japan with that of used in other countries

In the present study, an attempt was made to compare the statistical tools used for analysing the data of repeated dose toxicity studies with rodents conducted in 45 countries, with that of Japan. The study revealed that there was no congruence among the countries in the use of statistical tools for analysing the data obtained from the above studies. For example, to analyse the data obtained from repeated dose toxicity studies with rodents, Scheffé's multiple range and Dunnett type (joint type Dunnett) tests are commonly used in Japan, but in other countries use of these statistical tools is not so common. However, statistical techniques used for testing the above data for homogeneity of variance and inter-group comparisons do not differ much between Japan and other countries. In Japan, the data are generally not tested for normality and the same is true with the most of the countries investigated. In the present investigation, out of 127 studies examined, data of only 6 studies were analysed for both homogeneity of variance and normal distribution. For examining homogeneity of variance, we propose Levene's test, since the commonly used Bartlett's test may show heterogeneity in variance in all the groups, if a slight heterogeneity in variance is seen any one of the groups. We suggest the data may be examined for both homogeneity of variance and normal distribution. For the data of the groups that do not show heterogeneity of variance, to find the significant difference among the groups, we recommend Dunnett's test, and for those show heterogeneity of variance, we recommend Steel's test.     

Modeling of mercury sorption by activated carbon in a confined,a semi-fluidized,and a fluidized bed

A process model was developed to simulate elemental mercury sorption by activated carbon in three distinct beds, namely a confined, a semi-fluidized, and a fluidized bed. The model involved the coupling of a kinetic model based on the mechanisms of surface equilibrium and external mass transfer, and a material balance model based on the tank-in-series approach. For surface equilibrium, three different equilibrium laws were used in the model, namely the Henry's Law, the Langmuir isotherm and the Freundlich isotherm. Literature mercury sorption data were used to determine the best-fit values of parameters for these equilibrium expressions. The parameter-fitted model was then used to simulate mercury sorption processes in the three distinct beds. The simulation parameters were mercury concentration, gas flow rate, adsorption temperature and the degree of semi-fluidization. The simulation results have indicated that the model is capable of describing the literature available mercury sorption data. All the three surface equilibrium laws appear to simulate the adsorption profiles equally well mainly because the sorption process occurs in an extremely low concentration range. The simulation results for the three distinct beds have suggested that the confined bed has the best mercury control performance; however, it generates the highest pressure-drop across the bed. A fluidized bed creates the least pressure drop; however, its sorption performance is poor. A semi-fluidized bed offers acceptable performance with affordable pressure-drops and can be a practical candidate for the process.     

Shifting from apple to peach farming in Kazuno, northern Japan: perceptions of and responses to climatic and non-climatic impacts

Apple farmers in Kazuno, northern Japan, have started to grow peaches in the northernmost climatic region suitable for peach farming. Here, we investigate the process from the initial introduction of peach cultivation to its diffusion focusing on the farmers’ perceptions of climatic and non-climatic stimuli and their actions to respond to these stressors. Interviews with the farmers identified three distinct groups. Four farmers (Group 1) initiated the transition to peach production, which then spread to other farmers (Group 2) via personal connections. Later, after the provision of various means of support from the local government and the producers’ cooperative, many more apple farmers (Group 3) decided to begin peach production. Most farmers recognized the risk of damages to apple production as a result of typhoons and drought. However, only Group 1 farmers, who depend on direct sales to customers, mentioned these climate-related damages as a reason to shift toward peach cultivation in order to maintain their customers. The peach fruit was specifically chosen as a replacement for apple because it is less vulnerable to these climatic stressors. For Group 3 farmers, the financial losses associated with these climate-related events could be compensated for by insurance. Their decision to grow peach is largely due to its higher price and immunity against a specific disease which affects apples but they only shifted once institutional support was available, thereby reducing the risk in cultivating a new species. Our findings suggest that the role of institutions was not to drive the process of the adaptation itself but rather to provide relevant support to farmers to enable them to shift to new crop varieties more easily. We argue that such process-based understanding is crucial in formulating strategies to increase adaptive capacity in agriculture.     

Preparation of activated carbons from polycarbonate with chemical activation using response surface methodology

The disposal of waste plastics is a major environmental issue all over the world. As an alternative to disposal that also adds value to the waste product, polycarbonate particles were used as model waste plastic material, mixed with sodium hydroxide and then pyrolyzed at 773 K to produce activated carbon. Activated carbon has numerous industrial applications, including use as adsorbents in adsorption heat pumps and several environmental applications. Activated carbon obtained upon pyrolysis was characterized by determining its adsorption capacity for liquid nitrogen and water vapor. The effects of the key process variables, i.e., chemical ratio and activation time, on micropore development and water adsorptivity were evaluated by response surface methodology. The quadratic models were found to be satisfactory in describing their performance. Based on the contour plots, activated carbon with a maxima of surface area and micropore volumes can be produced at an optimal level of chemical ratio along with longer activation time. The water adsorptivity generally has less difference at low relative pressures, but inflexion of water adsorptivity occurs at a relative pressure of P/P ₀ ≈ 0.4. The optimized water adsorptivity in the operating pressure range of adsorption heat pumps (P/P ₀ = 0.11–0.38) can exceed 0.24 kg/kg.     

The chemical characteristics of ashes from cattle, swine and poultry manure

Animal manure is waste that contains large amounts of fertilizer resources. Incineration technology is effective in decreasing the volume of animal manure and concentrating the nutrients. In this study, the nutrient concentration and chemical compounds of several types of animal manure ash were examined to promote their recycling for agriculture. The nutrient concentration of manure ash was dependent on the reduction rate of solid materials by incineration. The phosphorus (P) and potassium (K) of cattle and layer manure were not concentrated greatly because of high silicon (Si) and calcium (Ca) concentrations, respectively. On the other hand, the P concentration of swine manure and broiler litter was increased to 10.1–12.0 % (3.6–4.6 times compared with original materials), equivalent to that of phosphate rock used as fertilizer material. The K concentration of broiler litter ash (16.1 %) was highest of all. The phosphate compounds of cattle and swine manure ashes were determined as Ca₉Fe(PO₄)₇ or Ca₉MgK(PO₄)₇. Hydroxyapatite (Ca₅(PO₄)₃(OH)) was detected in layer manure and broiler litter ashes. By acid treatment of ash, P and K availability of the fertilizer made from layer manure ash (33 % of materials) was equivalent to that of conventional chemical fertilizer.     

Effects of chronic ozone exposure on growth, root respiration and nutrient uptake of rice plants

To clarify the response of growth and root functions to low concentrations of ozone (O(3)), rice plants (Oryza sativa L.) were exposed to O(3) at 0.0 (control), 0.05 and 0.10 ppm for 8 weeks from vegetative to early heading stages. Exposure to 0.05 ppm O(3) tended to slightly stimulate the dry weight of whole plants up to 5 weeks and then slightly decrease the dry weight of whole plants. However, these effects were statistically significant only at 6 weeks. Exposure to 0.10 ppm O(3) reduced the dry weight of whole plants by 50% at 5 and 6 weeks, and thereafter the reduction of the dry weight of whole plants was gradually alleviated. Those changes in dry weight can be accounted for by a decrease or increase in the relative growth rate (RGR). The changes in the RGR caused by 0.05 and 0.10 ppm O(3) could be mainly attributed to the effect of O(3) on the net assimilation rate. Root/shoot ratio was lowered by both 0.05 and 0.10 ppm O(3) throughout the exposure period. The root/shoot ratio which had severely decreased at 0.10 ppm O(3) in the first half period of exposure (1-4 weeks) became close to the control in the latter part of exposure (5-8 weeks). Time-course changes in NH(4)-N root uptake rate were similar to those in the root/shoot ratio especially for 0.10 ppm O(3). On the other hand, root respiration increased from the middle to later periods. Since it is to be supposed that plants grown under stressed conditions change the ratio of plant organ weight to achieve balance between the proportion of shoots to roots in the plant and their activity for maintaining plant growth, these changes in root/shoot ratio and nitrogen uptake rate under long-term exposure can be considered to be an adaptive response to maintain rice growth under O(3) stress.