LCA of the South African sugar industry

A life cycle assessment of sugar produced in South Africa evaluates the environmental impacts and energy consumption of the different life cycle phases of sugar production. The system studied includes sugar cane farming, fertiliser and herbicide manufacture, cane burning, sugar cane transportation and sugar manufacture. Inventory and impact assessment results show that non-renewable energy consumption is 5350 MJ per tonne of raw sugar produced and 40% of this is from fertiliser and herbicide manufacture. Reduction in the use or impact of fertiliser for cane farming could bring considerable savings in terms of fossil energy consumption and a reduction in greenhouse gas emissions.     

Uptake of some selected aquatic pollutants in semipermeable membrane devices (SPMDs) and the polar organic chemical integrative sampler (POCIS)

The uptake characteristics of semipermeable membrane devices (SPMDs) and polar organic chemical integrative samplers (POCISs) were examined for mono, di and tributyltin, triphenyltin, pyrene, benzo[a]pyrene, 4-tert-butylphenol, 4-n-nonylphenol, PCBs 77 and 153, PBDE 47, lindane, triclosan and DDT. Exposure in a flow through system continued for 28 days with samplers removed every 7 days in order to study the relevant uptake kinetics. Uptake remained linear for POCISs with sampling rates (Rs) of up to 0.2 L d(-1). For SPMDs uptake varied from linear to approaching equilibrium with Rs values of up to 14 L d(-1). 7 out of 9 results for SPMDs could be explained by an empirical model (nonylphenol and lindane were exceptions). None of the four organo-tin compounds studied were detected in POCISs and only tributyltin was accumulated significantly by SPMDs. The establishment of these sampling rates allows the calculation of time weighted water concentrations for several important contaminants. Using presented methods, sampling rates and exposure conditions, theoretical detection limits for selected compounds by SPMDs were between 11-68 pg L(-1), which is well below the environment quality standard proposed for those compounds that are included in the European Water Framework Directive.     

Polycyclic aromatic hydrocarbons, black carbon, and molecular markers in soils of Switzerland

Polycyclic aromatic hydrocarbons (PAH) were analysed in 23 soil samples (0–10 cm layer) from the Swiss soil monitoring network (NABO) together with total organic carbon (TOC) and black carbon (BC) concentration, as well as some PAH source diagnostic ratios and molecular markers. The concentrations of the sum of 16 EPA priority PAHs ranged from 50 to 619 μg/kg dw. Concentrations increased from arable, permanent and pasture grassland, forest, to urban soils and were 21–89% lower than median numbers reported in the literature for similar Swiss and European soils. NABO soils contained BC in concentrations from 0.4 to 1.8 mg/g dw, except for two sites with markedly higher levels. These numbers corresponded to 1–6% of TOC and were comparable to the limited published BC data in soil and sediments obtained with comparable analytical methods. The various PAH ratios and molecular markers pointed to a domination of pyrogenically formed PAHs in Swiss soils. In concert, the gathered data suggest the following major findings: (1) gas phase PAHs (naphthalene to fluorene) were long-range transported, cold-condensated at higher altitudes, and approaching equilibrium with soil organic matter (OM); (2) (partially) particle-bound PAHs (phenanthrene to benzo[ghi]perylene) were mostly deposited regionally in urban areas, and not equilibrated with soil OM; (3) Diesel combustion appeared to be a major emission source of PAH and BC in urban areas; and (4) wood combustion might have contributed significantly to PAH burdens in some soils of remote/alpine (forest) sites.     

Vertical profile of PCDD/Fs, dioxin-like PCBs, other PCBs, PAHs, chlorobenzenes, DDX, HCHs, organotin compounds and chlorinated ethers in dated sediment/soil cores from flood-plains of the river Elbe, Germany

Concentrations of polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) and other organic micropollutants were determined in dated sediment/soil cores collected from the flood-plain of the river Elbe near Pevestorf (PT), approximately 125 km upstream of Hamburg, and Heuckenlock (HL) in southeast of Hamburg. Concentrations of PCDD/Fs peaked sharply at PT in the 1950s and at HL at the end of the 1940s. Cluster analyses provide evidence that the region of Bitterfeld-Wolfen (about 350-400 km upstream of Hamburg) could be the source of the PCDD/F contamination existing in the cores PT and HL since the 1940s. Obviously it is caused by sediments of the river Elbe of a similar composition. Whereas the PCDD/Fs, HCHs (hexacyclohexane isomers), DDX (DDT, DDD, DDE), and tetrachlorinated ethers in PT and HL presumably originated predominantly from the Bitterfeld-Wolfen region, organotin compounds in HL and dichlorinated haloethers in HL during the 1940s and 1950s can probably largely be attributed to emissions from the Hamburg region. Although they are separated by a large distance, in both sediment cores PT and HL concentrations and composition patterns of most organic micropollutants analyzed widely match. Inductively it can be concluded that similar contaminations will be found in many of the river bank soils between the Bitterfeld-Wolfen region and Hamburg. Excavation of top soils may uncover highly contaminated materials. Since the dated sediment cores show the variation in contaminants in the Elbe sediments over a defined time period, it is possible to make an approximate assessment of the actual degree of contamination to be expected in areas where in previous decades contaminated dredged sediments from the Elbe and from the Port of Hamburg have been deposited on land and used for building plots or for agricultural purposes.     

An input-output balance study for PCBs in humans

Polychlorinated biphenyl (PCB) input-output balance studies were performed on five male volunteers, aged between 24 and 30, for periods of 8-14 days in 1998. Dietary exposure was quantified by the duplicate meals method and varied between 220 and 460 ng of sigmaPCB (sum of 20 congeners) per day for each of the five individuals over the study period. Dietary intake was dominated by congeners 118, 138, 153 and 180. Average faecal outputs for the five volunteers were 50-290 ng of sigmaPCB (sum of 20 congeners) per day for each of the five individuals over the same period and was dominated by the same four congeners. Whilst the total PCB fluxes were therefore into the body (i.e., accumulation), important differences were noted for different individual congeners. PCBs 44, 47, 49, 52, 60, 66, 101, 105, 110, 118, 149, 151 and 183 all showed net absorption for all five volunteers. Some congeners showed a net absorption in some of the individuals but net excretion in others, as seen by other workers. These congeners (PCBs 138, 153, 180, 187 and 194) are all higher chlorinated congeners and lack meta-para-vicinal hydrogen atoms. There were differences in the net absorption/excretion between individuals, which appeared to be a function of body fat index (BFI). The volunteers with the lowest BFIs showed net excretion for the greatest number of congeners, whilst the individual with the highest BFI was a net absorber of all the congeners studied. The problems in determining and interpreting absorption efficiency values for use in quantitative exposure assessments are discussed. Various factors that influence net absorption of PCBs and other persistent organic pollutants are identified. These include compound properties (including susceptibility to metabolism), the individual's fat status and balance, exposure history and diet.     

A genoscape-network model for conservation prioritization in a migratory bird

Migratory animals are declining worldwide and coordinated conservation efforts are needed to reverse current trends. We devised a novel genoscape-network model that combines genetic analyses with species distribution modeling and demographic data to overcome challenges with conceptualizing alternative risk factors in migratory species across their full annual cycle. We applied our method to the long distance, Neotropical migratory bird, Wilson's Warbler (Cardellina pusilla). Despite a lack of data from some wintering locations, we demonstrated how the results can be used to help prioritize conservation of breeding and wintering areas. For example, we showed that when genetic, demographic, and network modeling results were considered together it became clear that conservation recommendations will differ depending on whether the goal is to preserve unique genetic lineages or the largest number of birds per unit area. More specifically, if preservation of genetic lineages is the goal, then limited resources should be focused on preserving habitat in the California Sierra, Basin Rockies, or Coastal California, where the 3 most vulnerable genetic lineages breed, or in western Mexico, where 2 of the 3 most vulnerable lineages overwinter. Alternatively, if preservation of the largest number of individuals per unit area is the goal, then limited conservation dollars should be placed in the Pacific Northwest or Central America, where densities are estimated to be the highest. Overall, our results demonstrated the utility of adopting a genetically based network model for integrating multiple types of data across vast geographic scales and better inform conservation decision-making for migratory animals.     

Influencing resilience: the role of policy entrepreneurs in mainstreaming climate adaptation

One way to make development pathways more resilient in the face of a changing climate has been through mainstreaming adaptation into government policies, planning and sectoral decision‐making. To date, many of the transferable lessons have taken the form of technical approaches such as risk assessments and toolkits. This article instead draws on evidence from South Asia to emphasise some of the more tacit and informal approaches used to influence adaptation policy. Despite their apparent significance in policy processes, such tactics are often neither planned for nor well reported in resilience‐building projects and programme documents. Using evidence to populate a typology of influencing strategies, this article looks particularly at the role of policy entrepreneurs who navigate the political complexity of both formal and informal governance systems to promote successful adaptation mainstreaming. It concludes with recommendations for adaptation and resilience programming that can more effectively harness the breadth of influencing strategies.     

Roof-level large- and small-scale coherent structures in a street canyon flow

Environmental Fluid Mechanics - The characteristics of large- and small-scale turbulent motions at roof-level in a street canyon flow were experimentally investigated along with their...