Anatomical localization and stereoisomeric composition of <Emphasis Type="Italic">Tribolium castaneum</Emphasis> aggregation pheromones

We report that the abdominal epidermis and associated tissues are the predominant sources of male-produced pheromones in the red flour beetle, Tribolium castaneum and, for the first time, describe the stereoisomeric composition of the natural blend of isomers of the aggregation pheromone 4,8-dimethyldecanal (DMD) in this important pest species. Quantitative analyses via gas chromatography–mass spectrometry showed that the average amount of DMD released daily by single feeding males of T. castaneum was 878 ± 72 ng (SE). Analysis of different body parts identified the abdominal epidermis as the major source of aggregation pheromone; the thorax was a minor source, while no DMD was detectable in the head. No internal organs or obvious male-specific glands were associated with pheromone deposition. Complete separation of all four stereoisomers of DMD was achieved following oxidation to the corresponding acid, derivatization with (1R, 2R)- and (1S, 2S)-2-(anthracene-2,3-dicarboximido)cyclohexanol to diastereomeric esters, and their separation on reversed-phase high-performance liquid chromatography at −54°C. Analysis of the hexane eluate from Porapak-Q-collected volatiles from feeding males revealed the presence of all four isomers (4R,8R)/(4R,8S)/(4S,8R)/(4S,8S) at a ratio of approximately 4:4:1:1. A walking orientation bioassay in a wind tunnel with various blends of the four synthetic isomers further indicated that the attractive potency of the reconstituted natural blend of 4:4:1:1 was equivalent to that of the natural pheromone and greater than that of the 1:1 blend of (4R,8R)/(4R,8S) used in commercial lures.     

Soil fertility dynamics in runoff-capture agriculture, Canary Islands, Spain

In the extremely arid (∼150 mm yr⁻¹) eastern Canary Islands of Lanzarote, Fuerteventura and La Graciosa, agriculture has been sustained for decades by a traditional runoff-capture (RC) farming system known as “gavias”. Although the main goal of these systems is to increase water supply for crops, making unnecessary conventional irrigation, a secondary and equally important factor is that this system allows for sustainable agricultural production without addition of chemical or organic fertilizers. A field study was conducted to assess the impact of long-term agriculture (>50 yr) on soil fertility and to evaluate key factors affecting the nutrient sustainability of RC agricultural production. Soil fertility and nutrient dynamics were studied through chemical characterization of the arable layer (0-25 cm) of RC agricultural plots, adjacent natural soils (control) not affected by runoff and cultivation, and sediments contributed by a series of RC events. Results showed that RC soils have enhanced fertility status, particularly because they are less affected by salinity and sodicity (mean electrical conductivity = 1.8 dS m⁻¹ vs. 51.0 dS m⁻¹ in control soils; mean exchangeable sodium percentage = 11.1% vs. 30.6% in control soils), and have higher water and nutrient holding capacities (mean clay plus silt contents ≈87% vs. 69% in control soils). In general, sediments transported with the runoff and deposited in RC plots (average sediment yield ≈ 46 ton ha⁻¹ yr⁻¹), contain sufficient nutrients to prevent a progressive reduction of essential plant nutrients below natural levels in spite of nutrient uptake and removal by the harvested crop. Average additions of nitrogen, phosphorus and potassium with the runoff sediments were 33.6, 35.3 and 48.8 kg ha⁻¹ yr⁻¹, respectively. Results of this study show how a crop production system can be sustained in the long term by natural hydrological and biogeochemical catchment processes. This system maintains a nutrient balance that is not based on energy-intensive inputs of fertilizers, but is integrated in natural nutrient cycling processes, unlike other tropical farming agroecosystems.     

Spatial and temporal variations in groundwater nitrate at an intensive dairy farm in south-east Ireland: Insights from stable isotope data

Achievement of at least “good ecological status” in all waterbodies under the EU Water Framework Directive by 2015 will in some cases be a challenge. The twin challenge is to manage expectations of policy makers for such waterbodies as to a realistic length of time required for improvement in water quality. Hence, understanding the source, transformation processes and residence time of nitrate in a hydrological system is an essential part of meeting such challenges. On a dairy farm with 24 shallow groundwater wells, the dual isotopic composition of nitrate (δ¹⁵N and δ¹⁸O) was used to clarify nitrate sources, to assess spatial and temporal variability in nitrate concentrations and to determine if and where denitrification was occurring. Vertical travel time was estimated to correlate nitrate concentrations with management practices. Organically derived nitrogen was the predominant source contributing to groundwater nitrate concentrations. Denitrification was identified as prevalent within specific regions of the study site. The distinct low temporal variability in the isotopic data suggests constancy among nitrate sources and processes over time across the study site. Vertical travel times of up to 3 years were estimated on site indicating the influence of recent management practices on nitrate concentrations. Very slow horizontal migration of groundwater (decades) indicates a legacy of older management practices. Stable isotope techniques, together with an understanding of time lag, provide an extra mechanism to test the efficacy of monitoring and mitigation programmes.     

Fertilization trajectory of the root crop Raphanus sativus across atmospheric pCO2 estimates of the next 300 years

Plant biomass is known to increase in response to elevated atmospheric CO₂ concentration (pCO₂); however, no experiments have quantified the trajectory of crop fertilization across the full range of pCO₂ levels estimated for the next 300 years. Here we quantify the above- and below-ground biomass response of Raphanus sativus (common radish) across eight pCO₂ levels ranging from 348 to 1791 ppmv. We observed a large net biomass increase of 58% above ground and 279% below ground. A large part of the net increase (38% of the above-ground and 53% of the below-ground) represented biomass fertilization at the high levels of pCO₂ (700–1791 ppmv) predicted if fossil fuel emissions continue unabated. The trajectory of below-ground fertilization in R. sativus greatly exceeded a trajectory based on extrapolation of previous experiments for plants grown at pCO₂ < 800 ppmv. Based on the experimental parameters used to grow these plants, we hypothesize that these experiments represent the maximum CO₂ fertilization that can be achieved for this plant growing under low light levels. If the below-ground biomass enhancement that we have quantified for R. sativus represents a generalized root-crop response that can be extrapolated to agricultural systems, below-ground fertilization under very high pCO₂ levels could dramatically augment crop production in some of the poorest nations of the world, provided that water resources are sufficient and sustainable.     

Minimizing leakage from a smelter off-gas system by enhanced control

The off-gas handling system is a vital component of a smelter and it is essential that it operates in accordance with environmental regulations. A key feature of the off-gas management system is maintaining a slightly negative system pressure to prevent gas leakage, such as SO₂, out into the work and external environments. To enhance sustainable development, there is also growing interest in capturing and reusing the significant amount of heat and CO₂ contained within off-gas. The potential incorporation of heat and CO₂ recovery systems places importance on enhancing control to minimize the risk of both gas leakage and disturbance of the smelting process. With these requirements in mind, an easily implementable feedforward control enhancement to existing control schemes is proposed to help provide improved performance.     

Applying the precautionary principle to consumer household cleaning product development

Hazardous chemicals are pervasive in household disinfectant products. Many ingredients have established associations with acute and chronic human health conditions as well as with environmental damage. Although these associations are suggested but not proven, they are of great concern. This article describes the application of the precautionary principle to the selection of an anti-microbial active ingredient for a botanical disinfectant when significant uncertainty exists around the hazard and risk of traditional disinfectant active ingredients. We show that application of the precautionary principle does not stifle innovation and facilitates a responsible approach to product development.     

An environmental impact assessment of quantum dot photovoltaics (QDPV) from raw material acquisition through use

Some emerging technologies are expected to be pivotal for solving many of the environmental challenges faced today, especially those related to energy. However, many of these technologies may incur significant environmental impacts over their life cycle, while having environmental benefits during their use. This paper presents results of a Life Cycle Assessment (LCA) of a proposed type of nanophotovoltaic, quantum dot photovoltaic (QDPV) module. The LCA is confined to the stages of raw materials acquisition, manufacturing, and use. The impacts of QDPV are compared with other types of PV modules and energy sources - both renewable and nonrenewable. To provide a comprehensive comparative assessment, QDPV modules were compared with mature as well as emerging PV types for which data are available. Comparative assessment with other types of energy sources includes coal, oil, lignite, natural gas, diesel, nuclear, wind, and hydropower.QDPV modules may have the potential to overcome two current barriers of solar technology: low efficiencies and high manufacturing costs. If higher efficiencies are realized, QDPV modules could pave the way to large scale implementation of solar energy, helping nations move toward greater energy independence. On the other hand, candidate materials as quantum dots for solar cell applications are mostly compound semiconductors such as cadmium selenide, cadmium telluride, and lead sulfide which may be toxic and for which renewable options are limited. Toxic effects of these materials may be exacerbated by their nanoscale features.The LCA was carried out using the software SimaPro, and the Ecoinvent Life Cycle Inventory (LCI) database supplemented with available literature and patent information. Our results indicate that while QDPV modules have shorter Energy PayBack Time (EPBT), lower Global Warming Potential (GWP), SO_x and NO_x emissions than other types of PV modules, they have higher heavy metal emissions, underscoring the need for investigation of emerging technologies, especially nano-based ones, from a life cycle perspective. QDPV modules are better in all impact categories assessed than carbon-based energy sources but they have longer EPBT than wind and hydropower and higher GWP.     

Health implications of radon distribution in living rooms and bedrooms in U.K. dwellings--a case study in Northamptonshire

Environmental radon exposure of residents of domestic premises in the United Kingdom (UK) and elsewhere in Europe is estimated on the basis of the measured radon concentrations in, and the relative occupancies of, the principal living room and bedroom. While studies on radon concentration variability in the individual units in apartment blocks in various countries have been described, little data has been reported on variability in two-storey single-family dwellings, and the majority of extant studies consolidate living room and bedroom data early in the analysis. To investigate this further, detailed analysis was made of radon concentration data from a set of thirty-four homes situated in areas of Northamptonshire known to exhibit high radon levels. All homes were of typical UK construction of brick/block/stone walls under a pitched tile/slate roof. Approximately 50% of the sample were detached houses, the remainder being semi-detached (duplex) or terraced (row-house). Around 25% of the sample possessed cellars, while 12% were single-storey dwellings (bungalows), reflecting the typical incidence of this type of dwelling in England. In the two-storey homes, all monitored bedrooms were on the upper floor. Distribution of the ratios of bedroom/living room radon concentrations (BR/LR ratio) in individual properties was left-skewed (mean 0.67, median 0.73, range 0.05-1.05) with a tail extending to just above 1.0. The mean is consistent with the outcome of earlier extensive studies in England, while the variability depends principally on the characteristics of the property, and not on seasonal factors. In a small set of homes, the BR/LR ratio was anomalously low, (mean 0.3). BR/LR ratios in single-storey homes clustered around a value of 1.0, indicating that house design, rather than lifestyle, is the dominant factor in determining bedroom radon concentrations. Homes with higher mean annual radon concentrations showed lower BR/LR ratios, supporting our proposal that, in some homes, radon emanation from building materials may comprise a significant component of the overall radon level.     

Activity ratios of 137Cs, 90Sr and 239+240Pu in environmental samples

Both global and Chernobyl fallout have resulted in environmental contamination with radionuclides such as 137Cs, 90Sr and 239+240Pu. In environmental samples, 137Cs and 239+240Pu can be divided into the contributions of either source, if also the isotopes 134Cs and 238Pu are measurable, based on the known isotopic ratios in global and Chernobyl fallout. No analogous method is available for 90Sr. The activity ratios of Sr to Cs and Pu, respectively, are known for the actual fallout mainly from air filter measurements; but due to the high mobility of Sr in the environment, compared to Cs and Pu, these ratios generally do not hold for the inventory many years after deposition. In this paper we suggest a method to identify the mean contributions of global and Chernobyl fallout to total Sr in soil, sediment and cryoconite samples from Alpine and pre-Alpine regions of Austria, based on a statistical evaluation of Sr/Cs/Pu radionuclide activity ratios. Results are given for Sr:Cs, Sr:Pu and Cs:Pu ratios. Comparison with fallout data shows a strong depletion of Sr against Cs and Pu.     

Trends in the spatial and temporal distribution of 129I and 99Tc in coastal waters surrounding Ireland using Fucus vesiculosus as a bio-indicator

Spatial and temporal trends in (129)I and (99)Tc concentrations around the Irish coastline have been evaluated using Fucus vesiculosus as a bio-indicator. (129)I concentrations in a recent set of seawater samples have also been recorded and reveal an identical spatial pattern. Concentrations of (129)I in Fucus from the northeast coast of Ireland proved to be at least two orders of magnitude higher than concentrations in Fucus from the west coast. The (129)I content of Fucus increased significantly between 1985 and 2003, in line with increases in discharges of (129)I from the Sellafield nuclear reprocessing plant. Similar trends were observed in the case of (99)Tc. (129)I/(99)Tc ratios in Irish seawater were deduced from the Fucus data, and compared to ratios in discharges from Sellafield and from the French reprocessing plant at Cap de la Hague. Levels of (129)I and (99)Tc in Fucus from the west coast were found to be enhanced with respect to levels in seaweeds from other regions in the Northern Hemisphere unaffected by discharges from nuclear installations such as those referred to.