Phosphogypsum amendment effect on radionuclide content in drainage water and marsh soils from southwestern Spain

Phosphogypsum (PG) is a residue of the phosphate fertilizer industry that has relatively high concentrations of 226Ra and other radionuclides. Thus, it is interesting to study the effect of PG applied as a Ca amendment on the levels and behavior of radionuclides in agricultural soils. A study involving treatments with 13 and 26 Mg ha(-1) of PG and 30 Mg ha(-1) of manure was performed, measuring 226Ra and U isotopes in drainage water, soil, and plant samples. The PG used in the treatment had 510 +/- 40 Bq kg(-1) of 226Ra. The 226Ra concentrations in drainage waters from PG-amended plots were similar (between 2.6 and 7.2 mBq L(-1)) to that reported for noncontaminated waters. Although no significant effect due to PG was observed, the U concentrations in drainage waters (200 mBq L(-1) for 238U) were one order of magnitude higher than those described in noncontaminated waters. This high content in U can be ascribed to desorption processes mainly related to the natural adsorbed pool in soil (25 Bq kg(-1) of 238U). This is supported by the 234U to 238U isotopic ratio of 1.16 in drainage waters versus secular equilibrium in PG and P fertilizers. The progressive enrichment in 226Ra concentration in soils due to PG treatment cannot be concluded from our present data. This PG treatment does not determine any significant difference in 226Ra concentration in drainage waters or in plant material [cotton (Gossipium hirsutum L.) leaves]. No significant levels of radionuclides except 40K were found in the vegetal tissues.     

A technicoeconomic approach for the selection of a site remediation strategy--part B: model application

Different tools, such as a screening matrix or decision framework, are available to select a remediation technology to treat a contaminated site. However, unless these methods can point out the appropriate technology in regards to the decision-maker's knowledge about the contaminated site, they are less useful to evaluate both the technical effectiveness and the cost of the remediation, and to assess different remediation strategies from either future data acquisition or the use of an irreversible remediation technology. A model developed to allow such evaluations has been used to simulate the remediation of a virtual contaminated site. From this, four remediation recommendations have been made. These recommendations are guidelines for the build up of a remediation strategy that would both maximize the effectiveness of the decontamination and minimize its total cost.     

New thiol adsorbent grafted on silica gel: synthesis,characterization and employment for heavy metal adsorptions

Silica gel surface has been modified in two reaction steps: (i) the silylating agent 3-mercaptopropyltrimetoxysilane was firstly immobilized to give a surface Sil-SH and (ii) this precursor incorporated an ethylene sulfide molecule to obtain the surface denoted Sil-SSH. This material was characterized by elemental analysis, IR spectroscopy, thermogravimetry, solid state 13C and 29Si NMR, and surface area measurement. These materials were employed as adsorbents for divalent heavy cations from aqueous solutions at room temperature and the isotherms were adjusted to a modified Langmuir equation. The maxima number of moles adsorbed were 1.0, 1.5, 1.6, 2.2, 2.4 and 3.3 mmol g(-1) for Co, Cu, Ni, Cd, Pb, and Hg, respectively.     

Mercury in the Moji-Guaçu river basin,S.P-Brazil: the link between marginal lagoons and river contribution,assessed by 210Pb dating profiles

Total mercury content was evaluated in water and suspended sediment samples of the Moji-Gua?u river and in water and bottom sediment of its 3 marginal lagoons (Catingueiro, Barrinha, and Rio das Pedras), located downstream of the sampling point in the main channel. In all situations, low Hg concentrations were found in suspended and bottom sediments. Aluminum was used as a geochemical tracer to normalize the Hg concentrations in the sediment cores from the Rio das Pedras lagoon (r = 0.92). It was estimated that the Moji-Gua?u river transports up to 19 kg Hg yr(-1), 65% in the dissolved form and 35% adsorbed onto particulate matter. Following an acute toxic stage observed in the years 1970-1980, the basin has been restored to its original conditions mainly by natural recovery and a general reduction in Hg input to the ecosystem.     

Simulating bioremediation of uranium-contaminated aquifers; uncertainty assessment of model parameters

Bioremediation of trace metals and radionuclides in groundwater may require the manipulation of redox conditions via the injection of a carbon source. For example, after nitrate has been reduced, soluble U(VI) can be reduced simultaneously with other electron acceptors such as Fe(III) or sulfate to U(IV), which may precipitate as a solid (uraninite).To simulate the numerous biogeochemical processes that will occur during the bioremediation of trace-metal-contaminated aquifers, a time-dependent one-dimensional reactive transport model has been developed. The model consists of a set of coupled mass balance equations, accounting for advection, hydrodynamic dispersion, and a kinetic formulation of the biological or chemical transformations affecting an organic substrate, electron acceptors, corresponding reduced species, and trace metal contaminants of interest, uranium in this study. This set of equations is solved numerically, using a finite difference approximation. The redox conditions of the domain are characterized by estimating the pE, based on the concentration of the dominant terminal electron acceptor and its corresponding reduced species. This pE and the concentrations of relevant species are then used by a modified version of MINTEQA2, which calculates the speciation/sorption and precipitation/dissolution of the species of interest under equilibrium conditions. Kinetics of precipitation/dissolution processes are described as being proportional to the difference between the actual and calculated equilibrium concentration. A global uncertainty assessment, determined by Random Sampling High Dimensional Model Representation (RS-HDMR), was performed to attain a phenomenological understanding of the origins of output variability and to suggest input parameter refinements as well as to provide guidance for field experiments to improve the quality of the model predictions. By decomposing the model output variance into its different input contributions, RS-HDMR can identify the model inputs with the most influence on various model outputs, as well as their behavior pattern on the model output. Simulations are performed to illustrate the effect of biostimulation on the fate of uranium in a saturated aquifer, and to identify the key processes that need to be characterized with the highest accuracy prior to designing a uranium bioremediation scheme.     

Solute transport modeling under cultivated sandy soils and transient water regime

Drainable lysimeters offer the possibility to integrate heterogeneous solute leaching conditions caused by row crops and transient water regime, and to conveniently measure water and solute fluxes at the drainage outlet. To compare solute leaching behavior in and around drainable lysimeters operating under a transient water regime in potato (Solanum tuberosum L.) fields, parameters of the convective lognormal transfer (CLT) function model were fitted using bromide (Br-) flux concentrations (Cf) measured in lysimeters and from Br- resident concentrations (Cr) measured in adjacent soil cores. Expected mean values Ez(I) obtained from Cr and Cf CLT parameters were equivalent and well correlated (R2 = 0.78). However, estimated median values mu of the CLT function were smaller when derived from Cr (1.05 to 1.28) compared with Cf (1.23 to 2.14). Most mu values were also smaller than previously reported values for a 30-cm reference depth, indicating that 50% of solute mass would leach more readily in these coarse sandy soils. Higher variance and dispersion of Cr compared with those of Cf could be related to a smaller sampling support (sample size/sampling area) in the case of Cr measured by soil coring, or to disruption of solute transport mechanisms in the repacked lysimeter. Retained Br- in the top soil layer after 12 to 17 cm of cumulative drainage was indicated by measured Cr. Neither CLT function simulated well residual topsoil Cr values, indicating that Br- plant cycling or preferential flow probably interfered even though tuber Br- uptake was relatively small.     

Development and application of an ecosystem management approach for protected natural areas

Preservation of small natural areas is not in itself a sufficient measure to maintain the integrity of the ecosystems for which they were initially set aside. Intense pressure from recreational use is just one of the many human-caused stresses that may degrade natural areas. Therefore, land-use planning and management from an ecological perspective is necessary to assess, ensure, and in some cases increase, the ecological integrity of protected natural areas. An ecosystem management approach for small protected natural areas with high recreational use is presented, based on three interrelated components: an ecological evaluation procedure of ecosystems, the implementation of management interventions on ecosystems, and the development of a monitoring scheme of ecosystem components. The ecological evaluation procedure combines two concepts: the biotic value of vegetation and wildlife and the abiotic fragility of the soils. This combined evaluation process results in the creation of a sensitivity map that can be used as a management tool for planners and managers. Management interventions, the second component of the management approach, are derived from concepts of ecological succession. Intentional human interventions are used to maintain the ecological integrity of ecosystems or in some cases to restore degraded sites. For the third component, only the basic principles of the monitoring program will be discussed. A pilot project in one of the Montreal urban community protected areas is presented to illustrate aspects of the proposed ecosystem management approach.     

Catalytic upgrading of higher 1-alkenes from polyethylene thermal cracking by modified Wacker oxidation

The economic success of feedstock recycling procedures for plastic wastes is increasingly demanding the conversion of the starting residue into more valuable chemicals. Thermal cracking of polyethylenes leads to the preparation of equimolar mixtures of n-paraffins and 1-alkenes within the C₂–C₁₀₀ range. These 1-olefins can be catalytically upgraded by selective oxidation processes to more valuable products (e.g., ketones and fatty acids) with different uses such as polar waxes, cetane improvers, varnishes, and printer inks. The results obtained on oxidation in a modified Wacker system of a model 1-olefin (1-dodecene) as well as of a distillate cut (C₁₀–C₂₅) of the product from the thermal cracking of urban polyethylene waste are described.     

Cost-benefit analysis as a tool for decision making in environmental projects

BACKGROUND, AIM AND SCOPE: The Damage-Function method is an efficient tool recently used in decision-making processes concerning environmental management. It is based on finding the relation between the origin of an environmental charge, and its impact on human health and the environment. The aim of the present investigation was to assess the positive impacts, also called benefits, of changes in environmental quality, and the economic viability of an industrial project on reduction of PCDD/F emissions. It has been developed with monetary criteria of two worldwide ambits: USA and European-Union countries. METHODS: The current study is a continuation of a previous investigation in which Substance Flow Analysis and Control Analysis Techniques were used to identify and to analyze all main flow values of PCDD/Fs inside the system of Tarragona Province (Spain). In the present study, Cost-Benefit Analysis (CBA) has been employed. The benefits derived from a minimization in the incidence of cancer due to a reduction in the emission of PCDD/Fs have been evaluated considering the value of a statistically saved life (VSL). Statistical analysis about uncertainty has also been incorporated. Here, the Monte Carlo simulation technique has been used. RESULTS: It is shown that CBS results depend firstly on the kind of VSL used. In fact, the differences between the decisions as a result of applying monetary criteria in USA and EU can be explained by differences between VSL values. CONCLUSION AND RECOMMENDATION: It is concluded that, for prices estimated in Euros, the emission cleaning project in the industrial plant is not feasible under any circumstance. However, although CBA seems to be a good analytical method, the final decision corresponds to the managers, who must weigh up not only the monetary criteria, but factors such as social questions.