A botanical importance rating system for estuaries

In many semi-arid areas, estuaries are threatened because of freshwater impoundment. Estuaries are important sites for ecological diversity and, increasingly, for recreation. A system has been developed which rates estuaries according to their botanical importance. A formula allows a single numerical importance score to be calculated. The area cover of each estuarine plant community type (i.e. intertidal salt marsh, submerged macrophytes, reed/sedge swamps and supratidal salt marsh) and its importance in the estuary forms the basis of the score. The ‘ecological condition’ of the plant community and the community richness within the estuary are incorporated into the formula. The formula is effective in determining the botanical importance of estuaries. Further methods to determine the zoological, physical and socio-economic importance of estuaries need to be developed to allow the overall importance of estuaries to be determined.     

Uncertainties in the role of land vegetation in the carbon cycle

Since the late 1950s the CO2 concentration of the atmosphere has been increasing by around 0.5-3 ppm per year. Understanding of carbon sinks is vital to understanding this trend and its future behaviour. Here we examine some of the factors which may affect the proportion of anthropogenic CO2 ending up in the atmosphere in the present and in the future, and variability in the CO2 increase from one year to another. We also examine the evidence for the potential of terrestrial ecosystem carbon sinks to take up or release CO2. In some cases, a careful re-examination of the research methods used to deduce present and future feedbacks may be necessary. The most advanced technology and the most complex models do not necessarily produce reliable results. They should be carefully checked against a general background knowledge of ecological processes before their results are accepted.     

pH dependence of ferrous sorption onto two smectite clays

This work examines the abilities of two smectite minerals (SWa-1 and Wyoming montmorillonite) to adsorb ferrous iron at concentrations from 0.037 mM (2 ppm) to 2.5 mM (240 ppm) over a range of pHs from 4.0 to 8.0. Both sorption isotherm and sorption edge data are presented. Ferrous sorption (Fe(aq)2+ = 0.1 mM) to both SWa-1 and Wyoming montmorillonite over the pH range 4.0-6.75 is relatively constant at approximately 1000 l kg(-1) for both minerals. Sorption in this pH range is attributed to the cation exchange capacity of the clay along the basal surfaces. At pH values above 6.75 the amount of ferrous iron sorbed increases dramatically. At pH 8, sorption (Fe(aq)+ = 0.1 mM) reaches 6600 l kg(-1) and 8000 l kg(-1) for Swa-1 and Wyoming montmorillonite respectively. This is attributed to the specific interaction between ferrous ions and surface sites along mineral edges. The overriding geochemical implication is that in reduced sediments containing more than a few percent clay, the pool of sorbed ferrous iron is vast. This pool of reduced iron is both redox labile and bio-available and is not readily indicated by simple measurement of dissolved Fe2+.     

The effect of the oil dispersant Omni-Clean on the toxicity of fuel oil no. 2 in two bioassays with the sheepshead minnow Cyprinodon variegatus

Bioassays (7-day early life stage and 96 h acute bioassays) were conducted with the sheepshead minnow, Cyprinodon variegatus, to determine the toxicity of the dispersant Omni-Clean by itself and in combination with fuel oil no. 2. Performance characteristics of both bioassay types were also compared. Bioassays used oil by itself, dispersant by itself, and oil and dispersant in various ratios. Omni-Clean was less toxic than many other dispersants, and had a relatively small effect on individual biomass. Toxicities of the oil/dispersant combinations were generally higher than expected from the toxicities of the oil and dispersant by themselves, indicating a more-than-additive effect on toxicity. The comparison of performance characteristics between the 7-day and the 96-hour bioassays showed that the early life stage test is generally more sensitive, and has the added advantage of an additional and sensitive endpoint (fish biomass).     

Urban stormwater quality control analysis with detention ponds.

This paper presents methodologies for the development of stormwater quality control measures based on the derived probability distribution approach. These stormwater control measures, such as the fraction of pollutant removed from storage facilities, are closed-form analytical models and can be effectively used to evaluate pollutant loads to receiving waters. In this study, a simple form of rainfall-runoff transformation with lumped parameters is first extended to take into account the spatial variations in model parameters. Second, the infiltration process is further incorporated to the rainfall-runoff transformation. This study demonstrates that analytical models can be developed with various levels of complexity based on different hydrologic considerations. The performance of the analytical models is evaluated in a case study, and the results indicate that, with an appropriately formulated rainfall-runoff transformation, analytical stormwater runoff models are capable of providing comparable results to continuous simulation models in the evaluation of the long-term performance of storage facilities.     

Development of a hazardous air pollutants monitoring program using the Data Quality Objectives process

To effectively reduce the environmental compliance costs associated with meeting hazardous air pollutant emission requirements, the U.S. Environmental Protection Agency's Data Quality Objective (DQO) process has been proposed as a suitable framework for establishing a defensible monitoring program. Through the use of a hazardous materials pilot study, the variability in the composite vapor pressure for regulated handwipe cleaning solvents was established. These results served as inputs to the DQO process, which identified that for facility decision-makers to claim with a 99% confidence level that the facility is in compliance with the National Emission Standards for Hazardous Air Pollutants (NESHAP), a minimum of 12 handwipe cleaning solvent compliance samples (taken at random every 6 months) must have a composite vapor pressure equal to or below the regulatory limit of 45 mmHg at 20 degrees C. Implementation of the DQO-based compliance-sampling plan eliminates the need for an affected facility to sample all regulated handwipe cleaning solvents while still maintaining a reasonably high level of confidence in the compliance status of its regulated sources. The approach described for designing a defensible compliance sampling plan can be extended to other aspects of the aerospace NESHAP rule, including compliance sampling for surface coating, chemical depainting, and hazardous waste disposal.     

Generation pattern of sulfur containing gases from anaerobically digested sludge cakes.

Eleven dewatered sludge cakes collected from anaerobic digesters at different treatment plants were evaluated for the amount, type, and pattern of odorous gas production. All but one of the sludge cakes were from mesophilic anaerobic digesters. One was from a thermophilic digester. The pattern and quantities of sulfur gases were found to be unique for each of the samples with regard to the products produced, magnitude, and subsequent decline. The main odor-causing chemicals were volatile sulfur compounds, which included hydrogen sulfide, methanethiol, and dimethyl sulfide. Volatile sulfur compound production peaked in 3 to 8 days and then declined. The decline was a result of conversion of organic sulfur compounds to sulfide. In one side-by-side test, a high-solids centrifuge cake generated more odorous compounds than the low-solids centrifuge cake. The data show that anaerobic digestion does not eliminate the odor potential of anaerobically digested dewatered cakes.     

The estimation of PAH bioavailability in contaminated sediments using hydroxypropyl-beta-cyclodextrin and Triton X-100 extraction techniques

A study was conducted to investigate whether cyclodextrins and surfactants can be used to predict polycyclic aromatic hydrocarbon (PAH) bioavailability in contaminated sediments. Two sediment samples were extracted with aqueous solutions of hydroxypropyl-beta-cyclodextrin (HPCD) and Triton X-100. PAH removal during extraction was compared with PAH removal during biodegradation and solid-phase extraction. The latter two methods were used as reference methods to establish which part of the PAHs could be biodegraded and to what extent biodegradation was governed by bioavailability limitations. It was demonstrated that HPCD extraction followed solid-phase extraction and removed primarily readily bioavailable PAHs, while Triton X-100 extracted both readily and poorly bioavailable PAHs. Moreover, HPCD did not affect the degradation of PAHs in biodegradation experiments, while Triton X-100 enhanced the degradation of low molecular weight PAHs. It was concluded that HPCD extraction may provide a good method for the prediction of PAH bioavailability. Triton X-100 extraction is unfit for the prediction of PAH bioavailability.     

The effect of diesel fuel sulfur content on particulate matter emissions for a nonroad diesel generator

The effect of sulfur content on diesel particulate matter (DPM) emissions was studied using a diesel generator (Generac Model SD080, rated at 80 kW) as the emission source to simulate nonroad diesel emissions. A load simulator was used to apply loads to the generator at 0, 25, 50, and 75 kW, respectively. Three diesel fuels containing 500, 2100, and 3700 ppm sulfur by weight were selected as generator fuels. The U.S. Environmental Protection Agency sampling Method 5 "Determination of Particulate Matter Emissions from Stationary Sources" together with Method 1A "Sample and Velocity Traverses for Stationary Sources with Small Stacks or Ducts" was adopted as a reference method for measurement of the exhaust gas flow rate and DPM mass concentration. The effects of various parameters on DPM concentration have been studied, such as fuel sulfur contents, engine loads, and fuel usage rates. The increase of average DPM concentrations from 3.9 mg/Nm3 (n cubic meter) at 0 kW to 36.8 mg/Nm3 at 75 kW is strongly correlated with the increase of applied loads and sulfur content in the diesel fuel, whereas the fuel consumption rates are only a function of applied loads. An empirical correlation for estimating DPM concentration is obtained when fuel sulfur content and engine loads are known for these types of generators: Y = Zm(alphaX + beta), where Y is the DPM concentration, mg/m3, Z is the fuel sulfur content, ppm(w) (limited to 500-3700 ppm(w)), X is the applied load, kW, m is the constant, 0.407, alpha and beta are the numerical coefficients, 0.0118 +/- 0.0028 (95% confidence interval) and 0.4535 +/- 0.1288 (95% confidence interval), respectively.