Instrumenting Light Aircraft for Air Pollution Research

Light aircraft and helicopters have been occasionally used to conduct aerial traverses for a single pollutant or atmospheric tracer. The continuous analyzer or sample collector is temporarily tied down with a seat belt or hand held. Flight variables are visually observed and written on the recorder chart, a notebook or possibly voice-recorded on a portable tape recorder. The versatile airborne instrumentation package described can measure and record up to 27 pollutant and flight variables from a Cessna Skymaster center-line thrust, light twin. Real-time analysis instrumentation include non-dispersive infrared analyzers for CO₂, CO, and hydrocarbons, conductivity and coulometric analyzers for sulfur dioxide and sulfur-containing gases, and Charlson-Ahlquist visual range nephelometer. A Battelle “bulk sampler” is used to collect particulates for weighing and microscopic examination. Indicated air speed, altitude, rate of climb, magnetic heading, temperature, and relative humidity are continuously measured. All variables are sequentially recorded on a 7-track, 200 bit per second, 27-channel, magnetic tape data logging system. Measured variables are recorded once each 0.3 to 0.8 sec—equivalent to 33-100 ft of traversedepending upon the number of variables recorded (i.e., between 9 and 27) when flying at 90 mph. Tape data are reduced directly by IBM 360 computer to a digital print-out or from tape to an X-Y analog plot.     

Prioritizing prevention opportunities in the Washington State construction industry, 2003-2007

Objective

This study compares construction industry groups in Washington State by injury severity and cost, and ranks industry groups according to potential for prevention.

Methods

All Washington State workers' compensation compensable claims with date of injury between 2003 and 2007 were classified into North American Industrial Classification System (NAICS) industry groups. Claims were then aggregated by injury type and industry groups were ranked according to a prevention index (PI). The PI is the average of the rank orders of the claim count and the claim incidence rate. A lower PI indicates a higher need for prevention activities. The severity rate was calculated as the number of days of time loss per 10,000 full-time equivalents (FTEs).

Results

For all injury types, construction industry groups occupy 7 of the top 15 PI ranks in Washington State. The severity rate among construction industry groups was twice that for non-construction groups for all injury types. Foundation, structure, and building exterior contractors (NAICS 2381) ranked highest in prevention potential and severity among construction industry groups for most common injury types including falls from elevation, fall on same level, struck by/against, and musculo-skeletal disorders of the neck, back, and upper extremity (WMSDs). Median claim costs by injury type were generally higher among construction industry groups.

Conclusions

The construction industry in Washington State has a high severity rate and potential for prevention. The methods used for characterizing these industry groups can be adapted for comparison within and between other industries and states.

Impact on Industry

These data can be used by industry groups and employers to identify higher cost and higher severity injury types. Knowledge about the relative frequencies and costs associated with different injury types will help employers and construction industry associations make better informed decisions about where prevention efforts are most needed and may have the greatest impact. The results of this study can also be used by industry stakeholders to cooperatively focus on high cost and high severity injuries and explore best practices, interventions, and solutions as demonstrated by efforts to prevent musculoskeletal disorders in masonry (Entzel, Albers, & Welch, 2007). Initiating construction industry groups to focus on high cost and high severity injuries may also help prevent other types of injuries.     

In situ ammonia removal in bioreactor landfill leachate

Although bioreactor landfills have many advantages associated with them, challenges remain, including the persistence of NH(3)-N in the leachate. Because NH(3)-N is both persistent and toxic, it will likely influence when the landfill is biologically stable and when post-closure monitoring may end. An in situ nitrogen removal technique would be advantageous. Recent studies have shown the efficacy of such processes; however, they are lacking the data required to enable adequate implementation at field-scale bioreactor landfills. Research was conducted to evaluate the kinetics of in situ ammonia removal in both acclimated and unacclimated wastes to aid in developing guidance for field-scale implementation. Results demonstrate that in situ nitrification is feasible in an aerated solid waste environment and that the potential for simultaneous nitrification and denitrification (even under low biodegradable C:N conditions) in field-scale bioreactor landfills is significant due to the presence of both aerobic and anoxic areas. All rate data fit well to Monod kinetics, with specific rates of removal of 0.196 and 0.117 mgN/day-g dry waste and half-saturation constants of 59.6 and 147 mgN/L for acclimated and unacclimated wastes, respectively. Although specific rates of ammonia removal in the unacclimated waste are lower than in the acclimated waste, a relatively quick start-up of ammonia removal was observed in the unacclimated waste. Using the removal rate expressions developed will allow for estimation of the treatment times and volumes necessary to remove NH(3)-N from recirculated landfill leachate.     

Physical and chemical changes during composting of wood chip-bedded and straw-bedded beef cattle feedlot manure

In the 1990s, restrictions on incineration encouraged the forest industry in western Canada to develop new uses for their wood residuals by product. One such use was as a replacement for cereal straw bedding in southern Alberta's beef cattle (Bos taurus) feedlot industry. However, use of carbon (C)-rich bedding, such as wood chips, had implications for subsequent composting of the feedlot manure, a practice that was being increasingly adopted. In a 3-yr study, we compared composting of wood chip-bedded manure (WBM) and barley (Hordeum vulgare L.) straw-bedded manure (SBM). There were no significant differences in temperature regimes of SBM and WBM, indicating similar rates of successful composting. Of 17 physical and chemical parameters, five showed significant (P < 0.10) differences due to bedding at the outset of composting (Day 0), and 11 showed significant differences at final sampling (Day 124). During composting (10 sampling times), seven parameters showed significant bedding effects, 16 showed significant time effects, and four showed a Bedding x Time interaction. Significantly lower (P < 0.10) losses of nitrogen (N) occurred with WBM (19%) compared with SBM (34%), which has positive implications for air quality and use as a soil amendment. Other advantages of WBM compost included significantly higher total C (333 vs. 210 kg Mg(-1) for SBM) and inorganic N (1.3 vs. 1.0 kg Mg(-1) for SBM) and significantly lower total phosphorus (4.5 vs. 5.3 kg Mg(-1) for SBM). Our results showed that wood chip bedding should not be a problem for subsequent composting of the manure after pen cleaning. In combination with other benefits, our findings should encourage the adoption of wood chips over straw as a bedding choice for southern Alberta feedlots.     

Formation and speciation of disinfection byproducts during chlor(am)ination of aquarium seawater

The chemistry associated with the disinfection of aquarium seawater is more complicated than that of freshwater, therefore limited information is available on the formation and speciation of disinfection byproducts(DBPs) in marine aquaria. In this study, the effects of organic precursors, bromide(Br-) and pre-ozonation on the formation and speciation of several typical classes of DBPs, including trihalomethanes(THM4), haloacetic acids(HAAs),iodinated trihalomethanes(I-THMs), and haloacetamides(HAc Ams), were investigated during the chlorination/chloramination of aquarium seawater. Results indicate that with an increase in dissolved organic carbon concentration from 4.5 to 9.4 mg/L, the concentrations of THM4 and HAAs increased by 3.2–7.8 times under chlorination and by 1.1–2.3 times under chloramination. An increase in Br-concentration from 3 to 68 mg/L generally enhanced the formation of THM4, I-THMs and HAc Ams and increased the bromine substitution factors of all studied DBPs as well, whereas it impacted insignificantly on the yield of HAAs. Pre-ozonation with 1 mg/L O3 dose substantially reduced the formation of all studied DBPs in the subsequent chlorination and I-THMs in the subsequent chloramination. Because chloramination produces much lower amounts of DBPs than chlorination, it tends to be more suitable for disinfection of aquarium seawater.     

A salamander’s toxic arsenal: review of skin poison diversity and function in true salamanders,genus <Emphasis Type="Italic">Salamandra</Emphasis>

Terrestrial salamanders of the genus Salamandra represent one of the most prominent groups of amphibians. They are mainly distributed across Europe but also reach Northern Africa and the Near East. Members of the six currently accepted species have long been known to be poisonous; however, work on their toxins was mostly published in German language, and therefore, many nuances of these studies have remained hidden from the majority of herpetologists and toxinologists. Several Salamandra species are called fire salamanders due to their highly contrasted, black-yellow colouration which probably serves to deter predators, although thorough evidence for aposematism in Salamandra is still lacking. Salamandra skin toxins do not only represent a potent antipredator defence but may also have antimicrobial effects. A better understanding of this dual function of Salamandra skin secretions is of utmost importance in the face of the emergence of a fungal disease causing catastrophic declines of fire salamanders in Central Europe, caused by the fungus Batrachochytrium salamandrivorans. In this review, we summarize the knowledge on Salamandra toxins, providing a list of the compounds so far isolated from their secretion and focusing on the bioactivity of the major compounds in Salamandra secretions, the steroidal alkaloids. We identify priorities for future research, including a screening of co-occurrence of steroidal alkaloids and tetrodotoxins in salamandrids, chemical characterization of already identified novel steroidal compounds, elucidation of the presence and role of peptides and proteins in the secretion, and experimental in vitro and in vivo study of the interactions between bioactive compounds in Salamandra skin secretions and cutaneous fungal and bacterial pathogens.     

MODEL FOR PREDICTING TRANSPORT OF PESTICIDES AND THEIR METABOLITES IN THE UNSATURATED ZONE1

ABSTRACT: A finite element model based on Galerkin's upstream weighted residual technique was developed to predict the simultaneous convective-dispersion transport and transformations of pesticides and their metabolites in the unsaturated zone. Transformations of the parent compound and its metabolites were assumed to be first-order reactions for oxidation and hydrolysis, while adsorption of the pesticide species (parent compound and metabolites) to the soil components was assumed to be represented by a linear equilibrium (Freundlich type) isotherm. Volatilization and plant root uptake of pesticides in the solution phase were neglected in the analysis. The proposed model was used to simulate the transport and transformation of aldicarb and its metabolites, aldicarb sulfoxide and aldicarb sulfone, in the soil profile. Several examples are used to demonstrate the accuracy, validity, and applicability of the proposed model. Simulated results indicate that the proposed model can potentially be used to estimate the mass flux of water, and pesticide and pesticide metabolite concentrations in the subsurface environment. However, further verification of the model against actual field data is needed to fully demonstrate the model's potential.     

Determining regional water quality patterns and their ecological relationships

A multivariate statistical method for analyzing spatial patterns of water quality in Georgia and Kansas was tested using data in the US Environmental Protection Agency's STORET data system. Water quality data for Georgia and Kansas were organized by watersheds. We evaluated three questions: (a) can distinctive regional water quality patterns be detected and predicted using only a few water quality variables, (b) are regional water quality patterns correlated with terrestrial biotic regions, and (c) are regional water quality patterns correlated with fish distributions? Using existing data, this method can distinguish regions with water quality very different from the average conditions (as in Georgia), but it does not discriminate well between regions that do not have diverse water quality conditions (as in Kansas). Data that are spatially and temporally adequate for representing large regions and for multivariate statistical analysis are available for only a few common water quality parameters. Regional climate, lithology, and biotic regimes all have the potential to affect water quality, and terrestrial biotic regions and fish distributions do compare with regional water quality patterns, especially in a state like Georgia, where watershed characteristics are diverse. Thus, identifiable relationships between watershed characteristics and water quality should allow the development of an integrated landaquatic classification system that would be a valuable tool for resource management. Because geographical distributions of species may be limited by Zoogeographic and environmental factors, the recognition of patterns in fish distributions that correlate with regional water quality patterns could influence management strategies and aid regional assessments.     

Roles of land use resolution and unit-area load rates in assessment of diffuse nutrient emissions

In contrast to its counterparts in Europe and North America, the Australian National Pollutant Inventory (NPI) includes estimates of aggregated emissions of nutrients (total nitrogen and total phosphorus) from catchments and facilities. Sparse or inadequate data limit the extent to which nutrient exports may be estimated from direct observations. The paucity of data for calibration and simulation limits the use of sophisticated models in most Australian catchments. Therefore, a simple unit-area load model-Catchment Management Support System (CMSS)-was selected to estimate aggregated catchment emissions for the NPI. Estimates from models like CMSS are sensitive to spatial and categorical resolution of land uses identified within the catchment and to nutrient generation rates selected for each land use category. Using three Hawkesbury-Nepean subcatchments, we show that while high spatial resolution of land use mapping is useful, only four or five major land use categories with carefully selected generation rates were required to estimate potential nutrient exports sufficiently well and to determine subcatchments contributing most. Nutrient emission estimates proved to be highly dependent on selection of generation rates so a bootstrap technique was adopted to reduce subjectivity and to improve estimates of confidence limits. This led to a specification of new generation rates for Natural, Unimproved pasture, Rural and Urban land uses and to establishment of uncertainty limits.