A Cost-Effective Weighing Chamber for Particulate Matter Filters

ABSTRACT

Particulate matter (PM) is a ubiquitous air pollutant that has been receiving increasing attention in recent years due in part to the association between PM and a number of adverse health outcomes, including mortality and increases in emergency room visits and respiratory symptoms, as well as exacerbation of asthma and decrements in lung function.^1-5 As a result, the ability to accurately sample ambient PM has become important, both to researchers and to regulatory agencies. The federal reference method for the determination of fine PM as PM_2.5 in the atmosphere recommends that particle-sampling filters be conditioned and weighed in an environment with constant temperature and relative humidity (RH).⁶ It is also recommended that vibration, electrostatic charges, and contamination of the filters from laboratory air be minimized to reduce variability in filter weight measurements. These controls have typically been maintained in small, environmentally controlled “cleanrooms.” As an alternative to constructing an elaborate cleanroom, we have designed, and presented in this paper, an inexpensive weighing chamber to maintain the necessary level of humidity control.     

Magnetic ion exchange treatment of stabilized landfill leachate

Stabilized landfill leachate is characterized by a high concentration of non-biodegradable organic matter, which is similar in chemistry to dissolved organic matter (DOM) in the natural aquatic environment. Magnetic ion exchange (MIEX) resin treatment is well-studied in drinking water for removal of DOM from natural waters. There are fewer studies evaluating MIEX treatment of waste waters, and there is no previous work evaluating MIEX treatment of landfill leachate. This work systematically evaluated MIEX treatment of stabilized landfill leachate and evaluated the results in the context of previous studies of MIEX treatment of natural and waste waters. Five leachates from four landfills were evaluated as a function of MIEX resin dose, mixing time, and regeneration efficiency. MIEX resin removed DOM from landfill leachate, even in the presence of a reported high background concentration of inorganic ions. MIEX resin that was exhausted with leachate DOM was effectively regenerated with a concentrated NaCl solution, and regenerated MIEX resin performed similarly to virgin resin. For a majority of the leachates, the removal trend for MIEX resin was color > UV-absorbing substances > dissolved organic carbon ≈ COD > total nitrogen. Finally, MIEX resin removed a wider range of DOM from leachate than coagulation. The most important contribution of this work is that MIEX treatment of leachate followed very similar trends as MIEX treatment of natural waters, which will allow previous MIEX data to be used to estimate the treatment efficiency of other waste waters.     

Comparing universal kriging and land-use regression for predicting concentrations of gaseous oxides of nitrogen (NOx) for the Multi-Ethnic Study of Atherosclerosis and Air Pollution (MESA Air)

BACKGROUND: Epidemiological studies that assess the health effects of long-term exposure to ambient air pollution are used to inform public policy. These studies rely on exposure models that use data collected from pollution monitoring sites to predict exposures at subject locations. Land use regression (LUR) and universal kriging (UK) have been suggested as potential prediction methods. We evaluate these approaches on a dataset including measurements from three seasons in Los Angeles, CA. METHODS: The measurements of gaseous oxides of nitrogen (NOx) used in this study are from a "snapshot" sampling campaign that is part of the Multi-Ethnic Study of Atherosclerosis and Air Pollution (MESA Air). The measurements in Los Angeles were collected during three two-week periods in the summer, autumn, and winter, each with about 150 sites. The design included clusters of monitors on either side of busy roads to capture near-field gradients of traffic-related pollution. LUR and UK prediction models were created using geographic information system (GIS)-based covariates. Selection of covariates was based on 10-fold cross-validated (CV) R(2) and root mean square error (RMSE). Since UK requires specialized software, a computationally simpler two-step procedure was also employed to approximate fitting the UK model using readily available regression and GIS software. RESULTS: UK models consistently performed as well as or better than the analogous LUR models. The best CV R(2) values for season-specific UK models predicting log(NOx) were 0.75, 0.72, and 0.74 (CV RMSE 0.20, 0.17, and 0.15) for summer, autumn, and winter, respectively. The best CV R(2) values for season-specific LUR models predicting log(NOx) were 0.74, 0.60, and 0.67 (CV RMSE 0.20, 0.20, and 0.17). The two-stage approximation to UK also performed better than LUR and nearly as well as the full UK model with CV R(2) values 0.75, 0.70, and 0.70 (CV RMSE 0.20, 0.17, and 0.17) for summer, autumn, and winter, respectively. CONCLUSION: High quality LUR and UK prediction models for NOx in Los Angeles were developed for the three seasons based on data collected for MESA Air. In our study, UK consistently outperformed LUR. Similarly, the 2-step approach was more effective than the LUR models, with performance equal to or slightly worse than UK.     

Online sorting of recovered wood waste by automated XRF-technology: part II. Sorting efficiencies

Sorting of waste wood is an important process practiced at recycling facilities in order to detect and divert contaminants from recycled wood products. Contaminants of concern include arsenic, chromium and copper found in chemically preserved wood. The objective of this research was to evaluate the sorting efficiencies of both treated and untreated parts of the wood waste stream, and metal (As, Cr and Cu) mass recoveries by the use of automated X-ray fluorescence (XRF) systems. A full-scale system was used for experimentation. This unit consisted of an XRF-detection chamber mounted on the top of a conveyor and a pneumatic slide-way diverter which sorted wood into presumed treated and presumed untreated piles. A randomized block design was used to evaluate the operational conveyance parameters of the system, including wood feed rate and conveyor belt speed. Results indicated that online sorting efficiencies of waste wood by XRF technology were high based on number and weight of pieces (70-87% and 75-92% for treated wood and 66-97% and 68-96% for untreated wood, respectively). These sorting efficiencies achieved mass recovery for metals of 81-99% for As, 75-95% for Cu and 82-99% of Cr. The incorrect sorting of wood was attributed almost equally to deficiencies in the detection and conveyance/diversion systems. Even with its deficiencies, the system was capable of producing a recyclable portion that met residential soil quality levels established for Florida, for an infeed that contained 5% of treated wood.     

In situ chemical oxidation: Lessons learned at multiple sites

This paper compiles a detailed set of in situ chemical oxidation (ISCO) lessons learned pertaining to design, execution, and safety based on global experiences over the last 20 years. While the benefits of a “correct” application are known (e.g., cost effectiveness, speed, permanence of treatment), history also provides examples of a variety of “incorrect” applications. These provide an opportunity to highlight recurring themes that resulted in failures. ISCO is, and will continue to provide, an important remedial tool for site remediation, particularly as a component of a multifaceted approach for addressing large and complex sites. Future success, however, requires an objective understanding of both the benefits and the limitations of the technology. The ability to learn from the mistakes of the past provides an opportunity to eliminate, or at least minimize, them in the future. Over the last 25 years of ISCO application, process understanding and knowledge have improved and evolved. This paper combines a thorough discussion of lessons learned through decades of ISCO implementation throughout all aspects of ISCO projects with an analysis of changes to the ISCO remediation market. By discussing the interplay of these two themes and providing recommendations from collective lessons learned, we hope to improve the future of safe, cost‐effective, and successful applications of ISCO.     

Atmospheric chemistry of perfluorobutenes (CF3CFCFCF3 and CF3CF2CFCF2): Kinetics and mechanisms of reactions with OH radicals and chlorine atoms,IR spectra,global warming potentials,and oxidation to perfluorocarboxylic acids

Relative rate techniques were used to determine k(Cl + CF₃CFCFCF₃) = (7.27 ± 0.88) × 10^?12, k(Cl + CF₃CF₂CFCF₂) = (1.79 ± 0.41) × 10^?11, k(OH + CF₃CFCFCF₃) = (4.82 ± 1.15) × 10^?13, and k(OH + CF₃CF₂CFCF₂) = (1.94 ± 0.27) × 10^?12 cm³ molecule^?1 s^?1 in 700 Torr of air or N₂ diluent at 296 K. The chlorine atom- and OH radical-initiated oxidation of CF₃CFCFCF₃ in 700 Torr of air gives CF₃C(O)F in molar yields of 196 ± 11 and 218 ± 20%, respectively. Chlorine atom-initiated oxidation of CF₃CF₂CFCF₂ gives molar yields of 97 ± 9% CF₃CF₂C(O)F and 97 ± 9% COF₂. OH radical-initiated oxidation of CF₃CF₂CFCF₂ gives molar yields of 110 ± 15% CF₃CF₂C(O)F and 99 ± 8% COF₂. The atmospheric fate of CF₃CF₂C(O)F and CF₃C(O)F is hydrolysis to give CF₃CF₂C(O)OH and CF₃C(O)OH. The atmospheric lifetimes of CF₃CFCFCF₃ and CF₃CF₂CFCF₂ are determined by reaction with OH radicals and are approximately 24 and 6 days, respectively. The contribution of CF₃CFCFCF₃ and CF₃CF₂CFCF₂ to radiative forcing of climate change will be negligible.     

Organic aerosol characterization by complementary measurements of chemical bonds and molecular fragments

Organic aerosol chemical markers from normalized concentrations of independent measurements of mass fragments (using Aerosol Mass Spectrometry, AMS) are compared to bond-based functional groups (from Fourier Transform Infrared spectroscopy, FTIR) during eight field projects in the western hemisphere. Several field projects show weak correlations between alcohol group fractions and m/z 60 fractions, consistent with the organic hydroxyl groups and the fragmentation of saccharides, but the weakness of the correlations indicate chemical differences among the relationships for ambient aerosols in different regions. Carboxylic acid group fractions and m/z 44 fractions are correlated weakly for three projects, with correlations expected for aerosols dominated by di-acid compounds since their fragmentation is typically dominated by m/z 44. Despite differences for three projects with ratios of m/z 44 to m/z 57 fragments less than 10, five projects showed a linear trend between the project-average m/z 44 to m/z 57 ratio and the ratio of acid and alkane functional groups. While this correlation explains only a fraction of the fragment and bond variability measured, the consistency of this relationship at multiple sites indicates a general agreement with the interpretation of the relative amount of m/z 44 as a carboxylic acid group marker and m/z 57 as an alkane group marker.     

Exploring the Crowding–Satisfaction Relationship in Recreational Boating

Along with the growing boating population and the number of boats in use on limited inland waterways, boater expectations of setting density, safety perceptions, and the associated impacts on their experience (e.g., satisfaction) are becoming increasingly important. The primary purpose of this article was to explore a recreational boating crowding–satisfaction model derived from previous work using safety and enjoyment as mediating variables. We also tested our crowding–satisfaction model among day and overnight users. Our analysis revealed no significant difference between day and overnight users for any of the relationships tested in our model. Our final model indicated as respondents’ expectations for seeing people increased along with their feelings of being crowded, they were more inclined to consider the conditions on the lake as being unsafe. They were also more inclined to indicate that the number of people they had seen on the lake detracted from their boating experience. Respondents’ satisfaction was tied to their perceptions of crowding. Mediating variables illustrated that the relationship was conditioned by perceptions of safety and enjoyment. Analysis of the indirect effect observed in our study illustrate that when the number of people seen on the lake exceed respondents’ expectations, their perceptions of safety and enjoyment both decline, resulting in lower satisfaction. These findings have implications for managing recreational boating use on inland lake systems. Given the role played by expectations in our model, efforts to communicate with boaters about conditions on these waterways is important for helping them plan their boating experience and avoid situations they consider unsafe or unsatisfactory.