一种高效节能的生物三相流化床技术

将竖流式生物三相流化床改为封闭卧式生物三相流化床后 ,不但保留了竖流式生物三相流化床原有的优点 ,消除了竖流式生物三相流化床存在的一些缺陷 ,而且又新增了功能 ,特别是电耗下降近 4 0 %。并着重介绍封闭卧式生物三相流化床在地下车库或其它对高度有限制场所的应用实例。该设备在处理餐饮业废水和一些中、小型工业有机废水中有较高的推广价值。     

西安地铁车站深基坑变形规律FLAC模拟研究

开展西安地铁深基坑变形规律理论与监测的研究对指导西北地区深基坑信息化施工具有重要价值。本文以西安地铁2号线某车站深基坑工程为背景,完成了车站深基坑施工监测方案设计,对深基坑施工过程进行了FLAC计算模拟,重点研究了桩体变形、钢支撑轴力、基坑周边地表变形规律。结果表明,复杂环境下城市地铁车站站深基坑明挖施工时,现场监测是信息化安全施工的保证,采用钻孔灌注桩和钢支撑的复合围护方案作为车站深基坑的围护结构是合理的,土方分层开挖方式和钢支撑预应力施加是减少空间效应保证安全施工的重要措施。桩身水平位移特别是桩顶水平位移是围护结构变形特性的直接反映,围护桩变形最大的地方为基坑中部到三分之二基坑深度处。基坑围护结构附近的地面隆起量明显小于基坑中部的隆起量,随着开挖深度增大,隆起量逐渐由基坑中部最大转变为两边大中间小的型式。     

紫外吸收剂在湖泊中的分布及其对底栖动物的毒性效应

紫外吸收剂大量用于工业材料和个人护理品中,近年来在水体中不断被检出,同时由于其高度亲脂性,易在底泥和水生生物体内富集,产生潜在的毒性效应,已成为一类新型污染物。本文综述了紫外吸收剂在湖泊环境中的分布和生物富集效应,重点分析了二苯甲酮类等典型紫外吸收剂对底栖动物的药物代谢系统、抗氧化系统及其生长发育的影响及其毒性作用机制,并对未来该领域的研究进行了展望。     

Quantitative health risk assessment of inhalation exposure to automobile foundry dust

With a growing awareness of environmental protection, the dust pollution caused by automobile foundry work has become a serious and urgent problem. This study aimed to explore contamination levels and health effects of automobile foundry dust. A total of 276 dust samples from six types of work in an automobile foundry factory were collected and analysed using the filter membrane method. Probabilistic risk assessment model was developed for evaluating the health risk of foundry dust on workers. The health risk and its influencing factors among workers were then assessed by applying the Monte Carlo method to identify the most significant parameters. Health damage assessment was conducted to translate health risk into disability-adjusted life year (DALY). The results revealed that the mean concentration of dust on six types of work ranged from 1.67 to 5.40 mg/m³. The highest health risks to be come from melting, cast shakeout and finishing, followed by pouring, sand preparation, moulding and core-making. The probability of the risk exceeding 10⁻⁶ was approximately 85%, 90%, 90%, 75%, 70% and 45%, respectively. The sensitivity analysis indicated that average time, exposure duration, inhalation rate and dust concentration (C) made great contribution to dust health risk. Workers exposed to cast shakeout and finishing had the largest DALY of 48.64a. These results can further help managers to fully understand the dust risks on various types of work in the automobile foundry factories and provide scientific basis for the management and decision-making related to health damage assessment.

     

Recovery of Ni(II) from real electroplating wastewater using fixed-bed resin adsorption and subsequent electrodeposition

Resin adsorption and subsequent electrodeposition were used for nickel recovery. Treated wastewater can meet the Electroplating Pollutant Discharge Standard. The spent resin is completely regenerated by 3 BV of 4% HCl solution. 95.6% of nickel in concentrated eluent was recovered by electrodeposition. Effective recovery of high-value heavy metals from electroplating wastewater is of great significance, but recovering nickel ions from real electroplating wastewater as nickel sheet has not been reported. In this study, the pilot-scale fixed-bed resin adsorption was conducted to recover Ni(II) ions from real nickel plating wastewater, and then the concentrated Ni(II) ions in the regenerated solution were reduced to nickel sheet via electrodeposition. A commercial cation-exchange resin was selected and the optimal resin adsorption and regeneration conditions were investigated. The resin exhibited an adsorption capacity of 63 mg/g for Ni(II) ions, and the average amount of treated water was 84.6 bed volumes (BV) in the pilot-scale experiments. After the adsorption by two ion-exchange resin columns in series and one chelating resin column, the concentrations of Ni(II) in the treated wastewater were below 0.1 mg/L. After the regeneration of the spent resin using 3 BV of 4% (w/w) HCl solution, 1.5 BV of concentrated neutral nickel solution (>30 g/L) was obtained and used in the subsequent electrodeposition process. Using the aeration method, alkali and water required in resin activation process were greatly reduced to 2 BV and 3 BV, respectively. Under the optimal electrodeposition conditions, 95.6% of Ni(II) in desorption eluent could be recovered as the elemental nickel on the cathode. The total treatment cost for the resin adsorption and regeneration as well as the electrodeposition was calculated.     

Could biochar amendment be a tool to improve soil availability and plant uptake of phosphorus? A meta-analysis of published experiments

Environmental Science and Pollution Research - As one of the most important nutrients for plant growth, phosphorus was often poorly available in soil. While biochar addition induced improvement of...     

Growth of Zostera japonica in different sediment habitats of the Yellow River estuary in China

Environmental Science and Pollution Research - The estuarine delta of the Yellow River is a region of strong land-ocean-human interactions that undergoes a unique evolutionary process. The delta is...     

湖南省高效生态农业模式与综合技术研究总结

文章总结了湖南省10年来推行高效生态农业模式和推广综合农业技术的理论和实践,以及取得的效益。经过10年的努力,5个试点县的生态环境质量得到了显著改善,农业与农村经济得到了巨大发展;累计推广应用面积3.2663106 hm2,新增产值50.90亿元。     

3株真菌对毒死蜱的降解特性

从污水排放口污泥中分离到3株以毒死蜱为唯一碳源生长的真菌WZ-Ⅰ、WZ-Ⅱ、WZ-Ⅲ,鉴定均为镰孢霉属(FusariumLK. exFx). 3株菌5d内对50mgL-1毒死蜱的降解率分别高达93. 5%、91. 4%和83. 5%.测定了不同碳源、pH、温度及毒死蜱浓度对真菌降解能力和生长量的影响.结果表明,以毒死蜱为唯一碳源且其浓度为20~200mgL-1,pH6. 5~9. 0,温度30 ~40℃时,真菌的降解效果较好;真菌生长量随外加碳源浓度的增加而增加,在pH 6. 5 ~9. 0时生长量较大,且当毒死蜱浓度为50mgL-1,温度40℃时其生长量最大. 图5表1参18     

城市垃圾渗滤液及其生物处理对策

垃圾的填埋处理产生了大量的垃圾渗滤液，必须进行处理后才能排入水体。目前主要是采用生物方法处理垃圾渗滤液。本文着重分析了垃圾渗滤液的特点，加成分复杂，水质水量变化大，金属、有权物和氨氮浓度高，微生物营养元素比例失调等，并列举实例提出了提高生物处理效果的相应对策。