Multi criteria decision analysis to develop an optimized municipal solid waste management scenario: a case study in Ulaanbaatar,Mongolia

Journal of Material Cycles and Waste Management - Since to 1990, Urbanization has occurred due to an increase in the number of unpredicted citizens and migration from the countryside to...     

Energy reduction of a submerged membrane bioreactor using a polytetrafluoroethylene (PTFE) hollow-fiber membrane

The fiber length and packing density of the PTFE membrane element were increased. The MBR was stably operated under an SAD^m of 0.13 m³·m^-2·hr^-1. Specific energy consumption was estimated to be less than 0.4 kWh·m^-3. In this study, we modified a polytetrafluoroethylene (PTFE) hollow-fiber membrane element used for submerged membrane bioreactors (MBRs) to reduce the energy consumption during MBR processes. The high mechanical strength of the PTFE membrane made it possible to increase the effective length of the membrane fiber from 2 to 3 m. In addition, the packing density was increased by 20% by optimizing the membrane element configuration. These modifications improve the efficiency of membrane cleaning associated with aeration. The target of specific energy consumption was less than 0.4 kWh·m^-3 in this study. The continuous operation of a pilot MBR treating real municipal wastewater revealed that the MBR utilizing the modified membrane element can be stably operated under a specific air demand per membrane surface area (SAD_m) of 0.13 m³·m^-2·hr^-1 when the daily-averaged membrane fluxes for the constant flow rate and flow rate fluctuating modes of operation were set to 0.6 and 0.5 m³·m^-2·d^-1, respectively. The specific energy consumption under these operating conditions was estimated to be less than 0.37 kWh·m^-3. These results strongly suggest that operating an MBR equipped with the modified membrane element with a specific energy consumption of less than 0.4 kWh·m^-3 is highly possible.     

Investigation of 1,4-dioxane originating from incineration residues produced by incineration of municipal solid waste

As a groundwater contaminant, 1,4-dioxane is of considerable concern because of its toxicity, refractory nature to degradation, and rapid migration within an aquifer. Although landfill leachate has been reported to contain significant levels of 1,4-dioxane, the origin of 1,4-dioxane in leachate has not been clarified until now. In this study, the origins of 1,4-dioxane in landfill leachate were investigated at 38 landfill sites and three incineration plants in Japan. Extremely high levels of 1,4-dioxane 89 and 340 microg l(-1), were detected in leachate from two of the landfill sites sampled. Assessments of leachate and measurement of 1,4-dioxane in incineration residues revealed the most likely source of 1,4-dioxane in the leachate to be the fly ash produced by municipal solid waste incinerators. Effective removal of 1,4-dioxane in leachate from fly ash was achieved using heating dechlorination systems. Rapid leaching of 1,4-dioxane observed from fly ash in a sequential batch extraction indicated that the incorporation of a waste washing process could also be effective for the removal of 1,4-dioxane in fly ash.     

Wayfinding with a GPS-based mobile navigation system: A comparison with maps and direct experience

This study examined the effectiveness of a Global Positioning System (GPS)-based mobile navigation system in comparison to paper maps and direct experience of routes, by focusing on the user's wayfinding behavior and acquired spatial knowledge. Based on information received from one of these three media, participants walked six routes finding the way to goals. Results showed that GPS users traveled longer distances and made more stops during the walk than map users and direct-experience participants. Also, GPS users traveled more slowly, made larger direction errors, drew sketch maps with poorer topological accuracy, and rated wayfinding tasks as more difficult than direct-experience participants. Characteristics of navigation with these three learning media and possible reasons for the ineffectiveness of the GPS-based navigation system are discussed.     

Future year ozone source attribution modeling study using CMAQ-ISAM

ABSTRACT

To achieve the current United States National Ambient Air Quality Standards (NAAQS) attainment level for ozone or particulate matter, current photochemical air quality models include tools to determine source apportionment and/or source sensitivity. Previous studies by the authors have used the Ozone and Particulate Matter Source Apportionment Technology and Higher-order Decoupled Direct Method probing tools in CAMx to investigate these source-receptor relationships for ozone. The recently available source apportionment for CMAQ, referred to as the Integrated Source Apportionment Method (ISAM), was used in this study to conduct future year (2030) source attribution modeling. The CMAQ-ISAM ozone source attribution results for selected cities across the U.S. showed boundary conditions were the dominant contributor to the future year highest July maximum daily 8-hour average (MDA8) ozone concentrations. Point sources were generally larger contributors in the eastern U.S. than in the western U.S. The contributions of on-road mobile emissions were around 5 ppb at most of the cities selected for analysis. Off-road mobile source contributions were around 20 ppb or nearly 30%. Since boundary conditions play an important role in future year ozone levels, it is important to characterize future year boundary conditions accurately. The current implementation of ISAM in CMAQ 5.0.2 requires significant computing resources for ozone source attribution, making it difficult to conduct long-term simulations for large domains. The computing requirements for PM source attribution are even more onerous. CMAQ 5.2 was released after this study was completed, and does not include ISAM. If an efficient version of ISAM becomes available, it could be used in long-term ozone and PM2.5 studies. Implications: Ozone source attribution results provide useful information on important emission source contribution categories and provide some initial guidance on future emission reduction strategies. This study explains a new source apportionment technique, CMAQ-ISAM, and compares it to CAMx OSAT. The techniques have similar results: ozone’s highest source contributor is boundary conditions, followed by point sources, then off-road mobile sources. The current version of ISAM in CMAQ 5.0.2 requires significant computing resources for ozone source attribution, while the computing requirements for PM source attribution are even more onerous. CMAQ 5.2 was released after this study was completed, and does not include ISAM.     

Roadside Rhododendron pulchrum leaves as bioindicators of heavy metal pollution in traffic areas of Okayama, Japan

The leaves of roadside Rhododendron pulchrum Sweet were examined as a bioindicator of traffic-related heavy metal pollution in Okayama. Total contents of heavy metals in roadside soil and the R. pulchrum leaves were determined. Results of correlation analyses showed significant correlations among Pb, Ni, and Zn contents of roadside soil and leaf samples. These results suggest that R. pulchrum is a useful bioindicator of heavy metal pollution in traffic areas. To identify traffic-related heavy metal pollution sources, traffic-related materials such as tires, asphalt pavement, and road paint were collected and analyzed. The results of analyses of our data show that Zn is emitted mainly from the abrasion of tires; Cr is emitted mainly from wear of the asphalt pavement. Furthermore, the respective lead isotope ratios in R. pulchrum leaves, soil, roadside dust, and traffic-related materials were measured using inductively coupled plasma mass spectrometry. The isotopic compositions of lead in R. pulchrum leaves were 207Pb/206Pb = 0.861-0.871 and 208Pb/206Pb = 2.093-2.127, which agrees well with ratios in automobile wheel balance weights, suggesting that lead-containing products associated with automobiles, such as wheel balance weights, contribute to traffic-related lead pollution.     

Spatial simulation and LCA evaluation on the plastic waste recycling system in Tianjin

With the rapid economic development in China, the amount of plastic waste (PW) generated has greatly increased and much of the waste is currently not treated. To reduce greenhouse gas (GHG) emissions from recycling of PW, we estimated the PW flow and considered methods to improve the household PW recycling system in Tianjin by adjusting processes during transportation and establishing a PW recycling factory in Zi’ya Industrial Park. The goal of the study was to identify reasonable improvements for the recycling system and clarify the environmental load. Geographic information system (GIS) technology was used to simulate transport processes for comparing GHG emissions from the transport processes between the present case and an improved case. Life cycle assessment (LCA) was used to compare GHG emissions between a projected scenario and a baseline scenario. Estimated GHG emissions during transport processes in the improved case were reduced by about 12,197 t CO₂ eq per year compared to the present case, equivalent to about 65.9 % of the total emissions in the present case. GHG emissions in the projected scenario were about 101,738 t CO₂ eq less per year than the baseline scenario, equivalent to about 75.5 % of the total emissions in the baseline scenario.     

Community-based solid waste bank program for municipal solid waste management improvement in Indonesia: a case study of Padang city

Journal of Material Cycles and Waste Management - Indonesia has a regulation UU No. 18/2008 which changes the paradigm from waste dumping to recycling. The purpose of this study is to understand...     

Light acclimation states of phytoplankton in the Southern Ocean, determined using photosynthetic pigment distribution

In high-latitude waters such as the Southern Ocean, the primary production of phytoplankton supports the ecosystem. To understand the photo-acclimation strategy of such phytoplankton within cold environments, the vertical distribution profile of photosynthetic pigments was analyzed in the Southern Ocean. Samples were taken along 110°E during the austral summer, and along 150°E and around the edge of the seasonal sea ice of the Antarctic Continent during the austral autumn. Pigment extraction methods were optimized for these samples. The standing crop of chlorophyll a was larger in the region along the edge of the seasonal sea ice than at sampling stations in open ocean areas. Chlorophyll concentration seemed to be dependent on the formation of thermo- and haloclines along the edge of the seasonal sea ice, but not in the open ocean where such clines are less pronounced. The marker pigments fucoxanthin and/or 19′-hexanoyloxyfucoxanthin were dominant at most sampling stations throughout the water column, while other marker pigments such as alloxanthin were quite low. This indicated that diatoms and/or haptophytes were the major phytoplankton in this area. Comparison of the relative ratio of fucoxanthin with that of 19′-hexanoyloxyfucoxanthin allowed some stations to be characterized as either diatom-dominant or haptophyte-dominant. The relative ratio of xanthophyll-cycle pigments (diadinoxanthin plus diatoxanthin) to chlorophyll a was high in surface waters and decreased gradually with depth. This suggests that near the ice edge during summer in the Southern Ocean, both diatoms and haptophytes acclimate to their light environments to protect their photosystems under high-light conditions.     

Oyster Contamination with Human Noroviruses Impacted by Urban Drainage and Seasonal Flooding in Vietnam

This study investigated the level of norovirus contamination in oysters collected at a lagoon receiving urban drainage from Hue City for 17 months (August 2015–December 2016). We also investigated the genetic diversity of norovirus GI and GII in oyster and wastewater samples by using pyrosequencing to evaluate the effect of urban drainage on norovirus contamination of oysters. A total of 34 oyster samples were collected at two sampling sites (stations A and B) in a lagoon. Norovirus GI was more frequently detected than GII (positive rate 79 vs. 41%). Maximum concentrations of GI and GII were 2.4 × 10⁵ and 2.3 × 10⁴ copies/g, respectively. Co-contamination with GI and GII was observed in 35% of samples. Norovirus GII concentration was higher at station A in the flood season than in the dry season (P = 0.04, Wilcoxon signed-rank test). Six genotypes (GI.2, GI.3, GI.5, GII.2, GII.3, and GII.4) were identified in both wastewater and oyster samples, and genetically similar or identical sequences were obtained from the two types of samples. These observations suggest that urban drainage and seasonal flooding contribute to norovirus contamination of oysters in the study area.