Proximate composition of household waste and applicability of waste management technologies by source separation in Hanoi,Vietnam

The organic fraction of municipal solid wastes in Southeast Asia, which has a high moisture content, accounts for a large proportion of total waste. Local governments need to pay adequate attention to the composition of wastes to determine alternative waste management technologies. This study proposed the use of a triangle diagram to describe changes in proximate composition and rates of successful source separation of municipal solid waste and to identify technical challenges about alternative waste management technologies such as incineration, composting, and refuse-derived fuel production based on physical and proximate composition analysis of household waste sampled in Hanoi, Vietnam, as a case study. The analysis indicated the effectiveness of different types of source separation as well as different levels of successful achievement of source separation as an adjustment mechanism for the proximate composition of waste. Proper categorization of wastes for source separation is necessary for the appropriate use of alternative waste management technologies. The results showed that, at a source separation rate of just greater than 0.52 in a three-way separation scheme, the waste separated as combustible waste would be suitable for incineration with energy recovery. Based on well-designed schemes of source separation, alternative waste management technologies can be applied.     

Enhanced phosphate removal by thermally pretreated waste oyster shells

Journal of Material Cycles and Waste Management - Waste oyster shells were used to remove phosphate and the effects of thermal pretreatment were studied. Thermal pretreatment under different...     

Household, hotel and market waste audits for composting in Vietnam and Laos.

In Da Nang and Ha Long, Vietnam and in Vientiane, Laos, there was interest by local authorities in separating and composting waste in order to reduce environmental and health problems at the local landfills and to produce a soil conditioner for local agricultural use. To assist in the planning of composting projects, three studies were carried out to estimate waste quantities and composition. 1. A 9-day audit of waste from 45 vendors in a market in Vientiane, the capital of Laos. The total quantity of waste and the quantity in each of nine categories were estimated for each of six different types of vendors. 2. A 7-day audit of waste disposed by three hotels in the tourist area of Ha Long, Vietnam. Waste quantities were estimated in total, on a per guest basis, and in three main categories: compostables, recyclables and miscellaneous. 3. A 7-day audit of waste collected from 74 households in Da Nang, the fourth largest city in Vietnam. Waste from each household was separated into compostable and non-compostable waste. Over 60% of each waste source comprised compostable waste and this was considered significant enough to warrant further planning of composting operations.     

Modeling groundwater flow and its associated environmental problem in a lowland coastal plain: a first step towards a sustainable development plan

Groundwater is an important resource in the alluvial coastal lowland plains. In the Shiroishi lowland plain, southwestern Kyushu Island of Japan, land subsidence due to groundwater development has long been recognized as an environmental issue. Land subsidence can have several negative economic and social implications. In this study, an integrated numerical groundwater and land subsidence model, which combines a three-dimensional numerical groundwater flow model and a one-dimensional soil consolidation model, was used to simulate the dynamic groundwater flow and ground subsidence due to pumping. On the other hand, a groundwater optimization model was also formulated to search for an optimal safe yield of groundwater pumping without violating physical, environmental, social-economic constraints. The model results reveal that groundwater levels in the aquifers greatly vary from season to season in response to varying climatic and pumping conditions. Consequently, land subsidence has rapidly occurred throughout the area with the central prone in Shiroishi plain. The study also proposes a countermeasure against subsiding process in the area by means of numerical models. The optimization model result suggests that pumping can be increased in the northern part of the study area without leading to significant land subsidence.     

Contamination of drinking water resources in the Mekong delta floodplains: arsenic and other trace metals pose serious health risks to population

This study presents a transnational groundwater survey of the 62,000 km(2) Mekong delta floodplain (Southern Vietnam and bordering Cambodia) and assesses human health risks associated with elevated concentrations of dissolved toxic elements. The lower Mekong delta generally features saline groundwater. However, where groundwater salinity is <1 g L(-)(1) Total Dissolved Solids (TDS), the rural population started exploiting shallow groundwater as drinking water in replacement of microbially contaminated surface water. In groundwater used as drinking water, arsenic concentrations ranged from 0.1-1340 microg L(-)(1), with 37% of the studied wells exceeding the WHO guidelines of 10 microg L(-)(1) arsenic. In addition, 50% exceeded the manganese WHO guideline of 0.4 mg L(-)(1), with concentrations being particularly high in Vietnam (range 1.0-34 mg L(-)(1)). Other elements of (minor) concern are Ba, Cd, Ni, Se, Pb and U. Our measurements imply that groundwater contamination is of geogenic origin and caused by natural anoxic conditions in the aquifers. Chronic arsenic poisoning is the most serious health risk for the ~2 million people drinking this groundwater without treatment, followed by malfunction in children's development through excessive manganese uptake. Government agencies, water specialists and scientists must get aware of the serious situation. Mitigation measures are urgently needed to protect the unaware people from such health problems.     

Effects of C/N ratio on nitrate removal and floc morphology of autohydrogenotrophic bacteria in a nitrate-containing wastewater treatment process

The effects of C/N ratio of a nitrate-containing wastewater on nitrate removal performed by autohydrogenotrophic bacteria as well as on the morphological parameters of floc such as floc morphology, floc number distribution, mean particle size(MPS), aspect ratio and transparency were examined in this study. The results showed that the nitrate reduction rate increased with increasing C/N ratio from 0.5 to 10 and that the nitrogen removal of up to 95% was found at the C/N ratios of higher than 5(between 0.5–10). Besides, high C/N ratio values reflected a corresponding high nitrite accumulation after 12-hr operation, and a fast decreasing rate of nitrite in the rest of operational time. The final p H values increased with the C/N ratio increasing from 0.5 to 2.5, but decreased with the C/N ratio increasing from2.5 to 10. There were no significant changes in floc morphology with the MPSs ranging from35 to 40 μm. Small and medium-sized flocs were dominant in the sludge suspension, and the number of flocs increased with the increasing C/N ratios. Furthermore, the highest apparent frequency of 10% was observed at aspect ratios of 0.5 and 0.6, while the transparency of flocs changed from 0.1 to 0.7.     

Self-Organizing Maps for Integrated Environmental Assessment of the Mid-Atlantic Region

A new method has been developed to perform environmental assessment at regional scale. This involves a combination of a self-organizing map (SOM) neural network and principal component analysis (PCA). The method is capable of clustering ecosystems in terms of environmental conditions and suggesting relative cumulative environmental impacts of multiple factors across a large region. Using data on land-cover, population, roads, streams, air pollution, and topography of the Mid-Atlantic region, the method was able to indicate areas that are in relatively poor environmental condition or vulnerable to future deterioration. Combining the strengths of SOM with those of PCA, the method offers an easy and useful way to perform a regional environmental assessment. Compared with traditional clustering and ranking approaches, the described method has considerable advantages, such as providing a valuable means for visualizing complex multidimensional environmental data at multiple scales and offering a single assessment or ranking needed for a regional environmental assessment while still facilitating the opportunity for more detailed analyses.     

Integrated assessment of brick kiln emission impacts on air quality

This paper presents monitoring results of daily brick kiln stack emission and the derived emission factors. Emission of individual air pollutant varied significantly during a firing batch (7 days) and between kilns. Average emission factors per 1,000 bricks were 6.35–12.3 kg of CO, 0.52–5.9 kg of SO₂ and 0.64–1.4 kg of particulate matter (PM). PM emission size distribution in the stack plume was determined using a modified cascade impactor. Obtained emission factors and PM size distribution data were used in simulation study using the Industrial Source Complex Short-Term (ISCST3) dispersion model. The model performance was successfully evaluated for the local conditions using the simultaneous ambient monitoring data in 2006 and 2007. SO₂ was the most critical pollutant, exceeding the hourly National Ambient Air Quality Standards over 63 km² out of the 100-km² modelled domain in the base case. Impacts of different emission scenarios on the ambient air quality (SO₂, PM, CO, PM dry deposition flux) were assessed.