Metal leaching from MSWI bottom ash as affected by salt or dissolved organic matter

In order to manage municipal solid waste incineration (MSWI) bottom ash safely, risk assessments, including the prediction of leaching under different field conditions, are necessary. In this study, the influence of salt or dissolved organic matter (DOM) in the influent on metal leaching from MSWI bottom ash was investigated in a column experiment. The presence of salt (0.1M NaCl) resulted in a small increase of As leaching, whereas no impact on leachate concentration was found when lakewater DOM (35.1mg/l dissolved organic carbon) was added. Most of the added DOM was retained within the material. Further, X-ray spectroscopy revealed that Cu(II) was the dominating form of Cu and that it probably occurred as a CuO-type mineral. The Cu(2+) activity in the MSWI bottom ash leachate was most likely determined by the dissolution of CuO together with the formation of Cu-DOM complexes and possibly also by adsorption to (hydr)oxide minerals. The addition of lake DOM in the influent resulted in lower saturation indices for CuO in the leachates, which may be due to slow CuO dissolution kinetics in combination with strong Cu-DOM complexation.     

Leachability testing of sludge from street gullies.

Sludge from gullies, on two types of streets with different traffic intensity, was investigated using two recommended EU methods for leachability testing of waste: a two-stage batch test and an up-flow percolation test. The main purpose of this investigation was to gain more knowledge about these leaching test methods to be able to make future decisions on the general applicability of the proposed tests. A number of parameters were determined in the sludge as well as in the eluates obtained from the two leaching tests. These include pH, conductivity, dissolved organic carbon and inorganic ions as chloride ions. A number of metals as Cd, Cr, Cu, Hg, Ni and Zn, were determined by inductive coupled plasmamass spectrometry and organic compounds were screened by high performance liquid chromatography-diode array UV detection and gas chromatography-mass spectrometry. It was found that the concentrations of metals and organic compounds in the sludge were several orders of magnitudes higher than the actual eluate concentrations. For all metals the concentrations were well below the proposed limit values for non-hazardous waste included in the Council decision document 2003/33/EC. Generally, concentrations obtained in batch test were equal or higher than from percolation tests. The repeatability of the percolation and the batch test were in average 28 and 17%, respectively.     

Community Odours in the Vicinity of a Petrochemical Industrial Complex

Community odours in the vicinity of an oil refinery and petrochemical industrial area were studied by an observer network throughout an entire year. Odour episodes occurred during 0.86 percent of the time of the study. Odour reports increased closer to the refinery. Within a range of 12.5 km, more than 50 percent of the odours were estimated to originate from the refinery. The most typical odour was that of reduced sulphur compounds (35.2 percent of all observations). Odour episodes occurred during low wind velocities and high humidity. Odours were most frequent during January-April, and were usually reported early in the morning. The odours were evidently due to the general operation of the plants, as no single activity or in-plant factor could be identified as the source of the odours.     

Fungicide leaching from golf greens: effects of root zone composition and surfactant use

Soil water repellency in golf putting greens may induce preferential "finger flow," leading to enhanced leaching of surface applied fungicides. We examined the effects of root zone composition, treatment with a non-ionic surfactant, and the use of the fungicide iprodion or a combination of azoxystrobin and propiconazole on soil water repellency, soil water content distributions, fungicide leaching, and turf quality during 1 yr. Soil water repellency was measured using the water drop penetration time (WDPT) test and tension infiltrometers. Our study was made on a 3-yr-old experimental green seeded with creeping bentgrass (Agrostis stolonifera L.) 'Penn A-4' at Landvik in southeast Norway. The facility consists of 16 lysimeters with two different root zone materials: (i) straight sand (1% gravel, 96% sand, 3% silt and clay, 4 g kg(-1) organic matter) (SS) and (ii) straight sand mixed with garden compost to an organic matter content of 21 g kg(-1) (Green Mix [GM]). Surfactant treatment resulted in 96% lower average WDPTs at 1 cm depth, three times higher water infiltration rates at the soil surface, and reduced spatial variation in soil water contents. Fungicide leaching was close to zero for the GM lysimeters probably due to stronger sorption. Concentrations in the drainage water from SS lysimeters often exceeded surface water guideline values for all three fungicides, but surfactant treatment dramatically reduced fungicide leaching from these lysimeters. In autumn and winter, surfactant-treated plots were more infected with fungal diseases probably because of higher water content in the turfgrass thatch layer.     

The Swedish Regional Climate Modelling Programme, SWECLIM: a review

The Swedish Regional Climate Modelling Programme, SWECLIM, was a 6.5-year national research network for regional climate modeling, regional climate change projections and hydrological impact assessment and information to a wide range of stakeholders. Most of the program activities focussed on the regional climate system of Northern Europe. This led to the establishment of an advanced, coupled atmosphere-ocean-hydrology regional climate model system, a suite of regional climate change projections and progress on relevant data and process studies. These were, in turn, used for information and educational purposes, as a starting point for impact analyses on different societal sectors and provided contributions also to international climate research.     

Life cycle assessment of hydrotreated vegetable oil from rape,oil palm and Jatropha

A life cycle assessment of hydrotreated vegetable oil (HVO) biofuel was performed. The study was commissioned by Volvo Technology Corporation and Volvo Penta Corporation as part of an effort to gain a better understanding of the environmental impact of potential future biobased liquid fuels for cars and trucks. The life cycle includes production of vegetable oil from rape, oil palm or Jatropha, transport of the oil to the production site, production of the HVO from the oil, and combustion of the HVO. The functional unit of the study is 1 kWh energy out from the engine of a heavy-duty truck and the environmental impact categories that are considered are global warming potential (GWP), acidification potential (AP), eutrophication potential (EP) and embedded fossil production energy. System expansion was used to take into account byproducts from activities in the systems; this choice was made partly to make this study comparable to results reported by other studies. The results show that HVO produced from palm oil combined with energy production from biogas produced from the palm oil mill effluent has the lowest environmental impact of the feedstocks investigated in this report. HVO has a significantly lower life cycle GWP than conventional diesel oil for all feedstocks investigated, and a GWP that is comparable to results for e.g. rape methyl ester reported in the literature. The results show that emissions from soil caused by microbial activities and leakage are the largest contributors to most environmental impact categories, which is supported also by other studies. Nitrous oxide emissions from soil account for more than half of the GWP of HVO. Nitrogen oxides and ammonia emissions from soil cause almost all of the life cycle EP of HVO and contribute significantly to the AP as well. The embedded fossil production energy was shown to be similar to results for e.g. rape methyl ester from other studies. A sensitivity analysis shows that variations in crop yield and in nitrous oxide emissions from microbial activities in soil can cause significant changes to the results.     

Release of Metals from Buildings,Constructions and Products during Atmospheric Exposure in Stockholm

This article presents results from investigations of run-off frommaterials used on buildings and other constructions obtained byshort term exposures of smaller model surfaces and one year exposures of larger materials surfaces on buildings and other constructions. Elevated concentrations of metals in run-off wereobserved for a wide range of different materials used on buildings and other constructions. Sources of metal emission tothe environment includes copper (Cu) surfaces, galvanized steel,impregnated wood, lead (Pb) surfaces, asphalt surfaces, paintedmaterial stainless steel and concrete. Metal emission rates fromsurfaces of copper and galvanized steel were measured from surfaces on buildings during 12 months exposure. The magnitude of metal emission form other surfaces was also estimated and theapplicability of these data for calculations of metal flows inan urban environment is discussed.     

Polonium-210 and lead-210 in the terrestrial environment: a historical review

The radionuclides ²¹⁰Po and ²¹⁰Pb widely present in the terrestrial environment are the final long-lived radionuclides in the decay of ²³⁸U in the earth’s crust. Their presence in the atmosphere is due to the decay of ²²²Rn diffusing from the ground. The range of activity concentrations in ground level air for ²¹⁰Po is 0.03-0.3 Bq m⁻³ and for ²¹⁰Pb 0.2-1.5 Bq m⁻³.In drinking water from private wells the activity concentration of ²¹⁰Po is in the order of 7-48 mBq l⁻¹ and for ²¹⁰Pb around 11-40 mBq l⁻¹. From water works, however, the activity concentration for both ²¹⁰Po and ²¹⁰Pb is only in the order of 3 mBq l⁻¹.Mosses, lichens and peat have a high efficiency in capturing ²¹⁰Po and ²¹⁰Pb from atmospheric fallout and exhibit an inventory of both ²¹⁰Po and ²¹⁰Pb in the order of 0.5-5 kBq m⁻² in mosses and in lichens around 0.6 kBq m⁻². The activity concentrations in lichens lies around 250 Bq kg⁻¹, dry mass.Reindeer and caribou graze lichen which results in an activity concentration of ²¹⁰Po and ²¹⁰Pb of about 1-15 Bq kg⁻¹ in meat from these animals. The food chain lichen-reindeer or caribou, and Man constitutes a unique model for studying the uptake and retention of ²¹⁰Po and ²¹⁰Pb in humans. The effective annual dose due to ²¹⁰Po and ²¹⁰Pb in people with high consumption of reindeer/caribou meat is estimated to be around 260 and 132 μSv a⁻¹ respectively.In soils, ²¹⁰Po is adsorbed to clay and organic colloids and the activity concentration varies with soil type and also correlates with the amount of atmospheric precipitation. The average activity concentration levels of ²¹⁰Po in various soils are in the range of 20-240 Bq kg⁻¹.Plants become contaminated with radioactive nuclides both by absorption from the soil (supported Po) and by deposition of radioactive fallout on the plants directly (unsupported Po). In fresh leafy plants the level of ²¹⁰Po is particularly high as the result of the direct deposition of ²²²Rn daughters from atmospheric deposition. Tobacco is a terrestrial product with high activity concentrations of ²¹⁰Po and ²¹⁰Pb. The overall average activity concentration of ²¹⁰Po is 13 ± 2 Bq kg⁻¹. It is rather constant over time and by geographical origin.The average median daily dietary intakes of ²¹⁰Po and ²¹⁰Pb for the adult world population was estimated to 160 mBq day⁻¹ and 110 mBq day⁻¹, corresponding to annual effective doses of 70 μSv a⁻¹ and 28 μSv a⁻¹, respectively. The dietary intakes of ²¹⁰Po and ²¹⁰Pb from vegetarian food was estimated to only 70 mBq day⁻¹ and 40 mBq day⁻¹ corresponding to annual effective doses of 30.6 μSv a⁻¹ and 10 μSv a⁻¹, respectively. Since the activity concentration of ²¹⁰Po and ²¹⁰Pb in seafood is significantly higher than in vegetarian food the effective dose to populations consuming a lot of seafood might be 5-15 fold higher.     

Temporal trends of organochlorines in Northern Europe, 1967-1995. Relation to global fractionation, leakage from sediments and international measures

The time trend monitoring of organochlorine pollution was carried out in Sweden since the late 1960s. This report presents data on concentrations of DDT, PCB, HCHs and HCB in biota samples collected and analysed annually. All the matrices and compounds studied show a significant decrease over time. The data cover severely polluted Swedish marine and fresh water in southern Sweden as well as locally unpolluted waters in remote northern Arctic regions of Sweden. A total of 13 time series representing different locations and species are presented for the different pollutants. The period studied covers the time when pollution was serious as well as the time of recovery. All monitoring activities were carried out at the same laboratories over the entire study period, which means that comparability over time is good in the sets of data presented. The various time trends show a convincing agreement with trends and annual change over time, although the concentrations differ between the species and locations investigated, the highest concentrations being in the south. Since the annual changes are normally similar regardless of locations and species, spatial variations in concentrations remain over time, although concentrations are lower today. The onset of changes in concentrations over time can be related to international measures or other circumstances that lowered releases into the environment. Similarities in the annual changes, as well as the time when changes began, are discussed with respect to suggested hypotheses on the fate of the investigated organochlorines. It was not possible to verify that the oxygenation of anoxic sediments mobilised old pollution in Baltic sediments. Neither was it possible to conclude that eutrophication has caused a measurable effect on the rate and timing of the decreases. Finally, long-range transport to Arctic regions seems to be due more to a one step transport than to the 'Grass-hopper' effect. The comprehensive database used, clearly shows how important it is to have datasets big enough to describe between-year variation before attempting to evaluate the time trend. In addition, if between-year variation is not known, it is then also difficult to evaluate spatial variation on the basis of single year observations.