Particulate composition characteristics under different ambient air quality conditions

Particulate compositions including elemental carbon (EC), organic carbon (OC), water-soluble ionic species, and elemental compositions were investigated during the period from 2004 to 2006 in southern Taiwan. The correlation between the pollutant standard index (PSI) of ambient air quality and the various particle compositions was also addressed in this study. PSI revealed a correlation with fine (r = 0.74) and coarse (r = 0.80) particulate matter (PM). PSI manifested a significant correlation with the amount of analyzed ionic species (r approximately 0.80) in coarse and fine particles and a moderate correlation with carbon content (r = 0.63) in fine particles; however, it showed no correlation with elemental content. Although the ambient air quality ranged from good to moderate, the ionic species including chloride (Cl-), nitrate (NO3-), sulfate (SO4(2-)), sodium (Na+), ammonium (NH4+), magnesium (Mg2+), and calcium (Ca2+) increased significantly (1.5-3.7 times for Daliao and 1.8-6.9 times for Tzouying) in coarse PM. For fine particles, NO3-, SO4(2-), NH4+, and potassium (K+) also increased significantly (1.3-2.4 times for Daliao and 2.8-9.6 times for Tzouying) when the air quality went from good to moderate. For meteorological parameters, temperature evidenced a slightly negative correlation with PM concentration and PSI value, which implied a high PM concentration in the low-temperature condition. This reflects the high frequency of PM episodes in winter and spring in southern Taiwan. In addition, the mixing height increase from 980 to 1450 m corresponds to the air quality condition changing from unhealthy to good.     

Photocatalytic degradation of methyl orange by a multi-layer rotating disk reactor

Introduction

Solar wastewater treatment based on photocatalytic reactions is a green process that utilizes renewable energy resources and minimizes secondary pollution. Reactor design plays an important role in promoting treatment efficiency and throughput density (based on unit volume of the reactor).

Experimental

A rotating disk reactor that significantly increases the process efficiency has been designed and evaluated for application to photocatalytic decomposition of dye pollutants in aqueous solutions. In this process, a novel multi-layer rotating disk reactor (MLRDR) was presented. Photocatalyst (TiO₂) particles are immobilized on the surfaces of disks. Within each layer of the reactor, methyl orange aqueous solution is allowed to flow from the center of the disk in a radial direction along the surface of the disk, which is rotating at high speed and is irradiated with UV lamps. The effluent is then directed to the center of another layer that lies underneath. Up to four stacked layers have been tested in this study, and the effects due to the number of the layers and volumetric flow rate on reaction conversion are investigated.

Results and discussion

The efficiency of this photocatalytic reactor exhibits complex dependence on these parameters. With selected operating conditions, conversions greater than 95% can be achieved within seconds of residence time. Design equations of the reactor have been derived based on fluid dynamics and kinetic models, and the simulation results show promising scale-up potential of the reactor.     

Characteristics of Road Dust from Different Sampling Sites in Northern Taiwan

Abstract

Road dust contributes a large percentage of the atmosphere’s suspended particles in Taiwan. Three road dust samples were collected from downtown, electrical park, and freeway tunnel areas. A mechanical sieve separated the road dust in the initial stage. Particles >100 μm were 75%, 70%, and 60% (wt/wt), respectively, of the samples. Those particles <37 μm were resuspended in another mixing chamber and then collected by a Moudi particle sampler. The largest mass fraction of resuspended road dust was in the range of 1–10 μm. Ultrafine particles (<1 μm) composed 33.7, 17, and 7.4% of the particle samples (downtown, electrical park, and freeway tunnel, respectively). The road dust compositions were analyzed by inductively coupled plasma (ICP)-atomic emissions spectroscopy and ICP-mass spectrometry. The highest concentration fraction contained more aluminum (Al), iron (Fe), calcium (Ca), and potassium than other elements in the road dust particle samples. Additionally, the sulfur (S) content in the road dust from the electrical park and freeway tunnel areas was 2.1 and 3.4 times the downtown area sample, respectively. The sulfur originated from the vehicle and boiler oil combustion and industrial manufacturing processes. Furthermore, zinc (Zn) concentration in the tunnel dust was 2.6 times that of the downtown and electrical park samples, which can be attributed to vehicle tire wear and tear. Resuspended road dusts (<10 μm) from the downtown and freeway tunnel areas were principally 2.5–10 μm Al, barium (Ba), Ca, copper (Cu), Fe, magnesium (Mg), sodium (Na), antimony (Sb), and Zn, whereas arsenic (As), chromium (Cr), and nickel (Ni) were predominant in the ultrafine particle samples (<1 μm). Al, Ba, and Ca are the typical soil elements in coarse particles; and As, and Cr and Ni are the typical fingerprint of oil combustion and vehicle engine abrasion in ultrafine particles. There was a special characteristic of resuspension road dust at electrical park, that is, many elements, including As, Ba, Ca, cadmium, Cr, Cu, Fe, manganese (Mn), Ni, lead (Pb), S, vanadium (V), and Zn, were major in ultrafine particles. These elements should be attributed to the special manufacturing processes of electric products.     

The association between maternal nonylphenol exposure and parity on neonatal birth weight: A cohort study in Taiwan

Background

The aim of this study was to explore the association between NP exposure and parity and their effect on neonatal birth weight.

Methods

A cohort of pregnant women was established in a medical center in North Taiwan. Urinary NP concentration was determined by high-performance liquid chromatography coupled with fluorescent detection and adjusted using creatinine. A multivariable regression model was fit to determine the association between the maternal NP level in each trimester and neonatal birth weight. The odds ratios (ORs) of infant birth weight below the 10th, 25th, and 50th percentiles, comparing pregnant women with the different NP exposure levels, was estimated using a logistic regression.

Results

Of the 162 pregnant women in the study, 99 were multiparas and 63 were primiparas. After adjusting for other covariates, the NP level in the second trimester had a significant association with birth weight in the primiparas (β = −182.49 g, p value = 0.02). The OR of low infant birth weight, comparing pregnant women with different NP levels, was increased by decreasing the cutoff percentile for birth weight (OR = 1.18 for the 50th percentile, 2.12 for the 25th percentile, and 7.81 for the 10th percentile). The odds of primiparas with high NP level having a low neonatal birth weight increased to 3.87, 11.77, and 9.40 for the three different percentiles (p value < 0.05).

Conclusion

Maternal NP exposure level is associated with an increased risk of low neonatal weight. Primiparas are especially at risk, and the second trimester of pregnancy may be the critical stage of exposure.     

Occurrence of perfluorinated compounds in the aquatic environment as found in science park effluent,river water,rainwater, sediments,and biotissues

The current article maps perfluoroalkyl acids (PFAAs) contamination in the largest Science Park of Taiwan. The occurrence of ten target PFAAs in the effluent of an industrial wastewater treatment plant (IWWTP), its receiving rivers, rainwater, sediment, and the muscles and livers of fish was investigated. All target PFAAs were found in effluent of IWWTP, in which perfluorooctane sulfonate (PFOS) (6,930 ng/L), perfluorohexyl sulfonate (PFHxS) (2,662 ng/L) and perfluorooctanoic acid (PFOA) (3,298 ng/L) were the major constituents. Concentrations of PFBS and PFOS in the IWWTP downstream areas have exceeded safe concentration levels of avian and aquatic life, indicating a potential risk to wildlife in those areas. In sediment samples, predominant contaminants were PFOS (1.5–78 ng/g), PFOA (0.5–5.6 ng/g), and perfluorododecanoic acid (PFDoA) (nd–5.4 ng/g). In biological tissue samples, concentrations as high as 28,933 ng/g of PFOS were detected in tilapia and catfish liver samples. A positive correlation for log (C _sediment/C _water) and log (C _tissue/C _water) was found. The concentration and proportion (percentage of all PFAAs) of PFOS found in biotissue samples from the Keya River (which receives industrial wastewater) were found to be much greater (200 times) than those of samples from the Keelung River (which receives mainly domestic wastewater). These findings suggest that the receiving aquatic environments and, in turn, the human food chain can be significantly influenced by industrial discharges.     

Will unit‐pricing enhance recycling?

Unit pricing is a program in solid waste management that integrates market instruments to encourage households to reduce waste generation and increase recycling. Many studies have shown that unit pricing is effective, especially when the evaluation is based on comparing outcomes before and after implementation. In this paper, we use the so-called difference-in-differences approach to evaluate unit pricing. This approach can provide a less-biased estimation, and can help to examine whether a unit pricing program generates less waste and higher recycling or results in illegal dumping in neighboring regions. Using the fee-per-bag program implemented in Taipei City, Taiwan, as a case study, we found that unit pricing does reduce the amount of garbage but its impact on recycling is not as significant as the current literature suggests. Moreover, the program causes a serious negative externality: more than 60%?of the garbage reduction in the city is due to increased dumping of waste in neighboring regions. As the impact of unit‐pricing on recycling is limited, policy-makers cannot rely solely on this program to enhance recycling in the management of municipal solid waste.     

Effects of emulsified asphalt on the mechanical properties of granulation of calcium fluoride sludge

Journal of Material Cycles and Waste Management - To reduce the landfill volume of waste CaF2 sludge, artificial fluorite bulk (AFB) is granulated by blending CaF2 sludge and emulsified asphalt...     

A fuzzy risk assessment approach for occupational hazards in the construction industry

The techniques in the construction industry have been improved due to the rapid development of science and technology. However, the constructional hazards are not decreased as expected. To reduce or prevent occupational hazards in the construction industry, a fuzzy risk assessment method was proposed to provide a prevention and improvement technique against occupational hazards. This method used two-stage quality function deployment (QFD) tables to represent the relationships among construction items, hazard types and hazard causes. A fuzzy analytic network process (ANP) method was developed to identify important hazard types and hazard causes. Failure modes and effect analysis (FMEA) was performed to assess the risk value of hazard causes based on the fuzzy inference approach. The proposed method was applied to a telecom engineering company in southern Taiwan. The performance evaluation result indicated that this method can provide satisfactory risk assessment values of hazard causes and relevant improvement strategies.     

Trends in concentration of ground-level ozone and meteorological conditions during high ozone episodes in the Kao-Ping Airshed, Taiwan

This work analyzes the variations in daily maximum 1-hr ozone (O3) concentrations and the long-term trends in annual means of hourly ambient concentrations of O3, nitrogen oxides (nitrous oxide + nitrogen dioxide), and nonmethane hydrocarbons in the three administrative regions of Kao-Ping airshed in southern Taiwan over a recent 8-yr period. The annual or monthly means of all maxima, most 95th percentiles, and some 90th percentiles of the daily maximum 1-hr O3 concentrations exceed the daily limit of 120 parts per billion by volume in all three regions, namely, Kao-hsiung City, Kso-hsiung County, and P'ing-tung County. The monthly means of daily maximum 1-hr O3 concentrations exhibit distinct seasonal variations, with a bimodal form with the maxima in autumn and late winter to the middle of spring and a minimum in summer. The long-term variations in the annual means of hourly O3 concentrations in the three regions exhibit increasing trends. These increases in O3 are associated with the decline in ambient concentrations of nitrogen oxides and nonmethane hydrocarbons. High O3 episodes occur most often in autumn and most rarely in summer. The seasonal mean mixing heights in descending order follow the order of spring, summer, autumn, and winter. Meteorological parameters in autumn and winter indicate that the ground-level O3 tends to accumulate and trigger a high O3 episode on a warm day with sufficient sunlight and low wind in a high-pressure system, consistent with the low mixing heights in these two seasons.