Regional medical waste management in China: a case study of Shenyang

Medical waste management is of great importance due to its potential environmental and public health risks, especially in developing countries where both financial and technological resources on medical waste management are still lacking. Although many studies have focused on country-scaled medical waste management, few have paid close attention to regional (city-scale) management, particularly in China. This paper fills such a gap by employing a case study approach. Due to its representative nature, Shenyang was selected as the case study. After a review of China’s medical waste management, an empirical study in Shenyang was conducted in order to analyze the current state as well as identify key challenges on regional medical waste management. Based upon the local realities and aiming to better manage medical wastes, an integrated medical waste management framework is developed. Such a platform encourages the establishment of a specific medical waste management authority, a city scaled capacity building program on improving the general public’s awareness, an information platform, application of state-of-the-art technologies, as well as creation of an effective financial system. The combination of such initiatives can significantly improve the overall eco-efficiency of medical waste management at the regional level and should be promoted to other developing cities.     

Response surface method for modeling the removal of carbon dioxide from a simulated gas using water absorption enhanced with a liquid-film-forming device

This paper presents the results from using a physical absorption process to absorb gaseous CO_2mixed with N_2using water by producing tiny bubbles via a liquid-film-forming device(LFFD)that improves the solubility of CO_2in water.The influence of various parameters—pressure,initial CO_2concentration,gas-to-liquid ratios,and temperature—on the CO_2removal efficiency and its absorption rate in water were investigated and estimated thoroughly by statistical polynomial models obtained by the utilization of the response surface method(RSM)with a central composite design(CCD).Based on the analysis,a high efficiency of CO_2capture can be reached in conditions such as low pressure,high CO_2concentration at the inlet,low gas/liquid ratio,and low temperature.For instance,the highest removal efficiency in the RSM–CCD experimental matrix of nearly 80%occurred for run number 20,which was conducted at 0.30 MPa,CO_2concentration of 35%,gas/liquid ratio of 0.71,and temperature of 15°C.Furthermore,the coefficients of determination,R~2,were 0.996 for the removal rate and 0.982 for the absorption rate,implying that the predicted values computed by the constructed models correlate strongly and fit well with the experimental values.The results obtained provide essential information for implementing this method properly and effectively and contribute a promising approach to the problem of CO_2capture in air pollution treatment.     

Chlordane compounds residues in Weddell seals (Leptonychotesweddelli) from the Antarctic

Weddell seal samples taken from the Antarctic have been found to be contaminated with chlordane compounds. ΣChlordane ($\text{cis}\text{-chlordane}\text{+}\text{cis}\text{-nonachlor}\text{+}\text{trans}\text{-nonachlor}\text{+}\text{oxychlordane}$) was present in blubber of seals at the range of 12 - 62 ng/g fresh weight. The order of chlordane compound concentrations was $\text{trans}\text{-nonachlor}\text{>}\text{oxychlordane}\text{>}\text{cis}\text{-nonachlor}\text{>}\text{cis}\text{-chlordane}$. Relative aboundance of $\text{cis}$-chlordane in Σchlordane is higher than that in humans. A probable explanation for their occurrence in the Antarctic is an airborne transport.     

Closed-loop supply chain under different channel leaderships: considering different deposit–refund systems practically applied in China

Journal of Material Cycles and Waste Management - Different deposit–refund systems are being practically applied to promote the proper treatment of end-of-life products in China. One is...     

Effect of additives on dechlorination of PVC by mechanochemical treatment

Polyvinyl chloride (–CH₂–CHCl–) _n (PVC) was ground with a powdered inorganic material (CaO, CaCO₃, SiO₂, Al₂O₃, or slag) in a planetary ball mill under atmospheric conditions to investigate the effect of additions on its dechlorination. The grinding causes a dehydrochlorinating reaction, forming a mixture of partially dechlorinated PVC and inorganic chloride, depending on the grinding time. The dechlorination increases as the grinding progresses, and is improved with increasing amounts of additives. The most effective additive is a mixture of CaO, SiO₂, and Al₂O₃, which has the same constituent components as blast furnace slag. CaO, a mixture of CaO, SiO₂, and blast furnace slag, are also effective, but CaCO₃ is the least effective additive tired. Received: August 3, 2000 / Accepted: September 21, 2000     

Delignification of disposable wooden chopsticks waste for fermentative hydrogen production by an enriched culture from a hot spring

Hydrogen(H2) production from lignocellulosic materials may be enhanced by removing lignin and increasing the porosity of the material prior to enzymatic hydrolysis. Alkaline pretreatment conditions,used to delignify disposable wooden chopsticks(DWC) waste, were investigated. The effects of NaOH concentration, temperature and retention time were examined and it was found that retention time had no effect on lignin removal or carbohydrate released in enzymatic hydrolysate. The highest percentage of lignin removal(41%) was obtained with 2% NaOH at 100℃, correlated with the highest carbohydrate released(67 mg/gpretreated DWC) in the hydrolysate. An enriched culture from a hot spring was used as inoculum for fermentative H2 production, and its optimum initial pH and temperature were determined to be 7.0 and 50℃, respectively. Furthermore, enzymatic hydrolysate from pretreated DWC was successfully demonstrated as a substrate for fermentative H2 production by the enriched culture. The maximum H2 yield and production rate were achieved at 195 mL H2/g total sugarsconsumedand 116 mL H2/(L·day), respectively.     

Body morphologies shape territorial dominance in the satyrine butterfly <Emphasis Type="Italic">Lethe diana</Emphasis>

Male butterflies compete over mating territories via aerial interactions. It has often been suggested that flight performance, and thus flight-related traits, would play an important role in butterflies’ contest resolution; however, most studies have not demonstrated a clear relationship between these traits and territory ownership in butterflies. Males of the satyrine butterfly Lethe diana compete over territories via linear chases, a behavior that is uncommon among butterflies: rather, contests of most butterfly species consist of circling flights. In the present study, some morphological and physiological traits of L. diana were compared between territory owners and intruders to search for traits correlated with resource holding power (RHP). Territory owners had higher flight-muscle ratio (FMR) and were heavier than intruders, indicating that flight performance plays a key role in their contest resolution. Contest duration was not affected by the owners’ FMR or body mass, and thus I obtained no evidence supporting the hypothesis that contestants assess their relative RHP before making a decision to retreat. I speculate that the fact that these traits had an effect on territorial status in L. diana was a result of the characteristics of the contest behavior of this butterfly. During their contests, males L. diana fly faster in their linear flights than males of most other butterflies, which engage in slower circling flights. Therefore, males of L. diana probably need higher flight performance capabilities in order to win their contests.     

Transportation of organic matter to the sea floor by carrion falls of the giant jellyfish <Emphasis Type="Italic">Nemopilema nomurai</Emphasis> in the Sea of Japan

The fate of the giant jellyfish Nemopilema nomurai after death was examined in the southwest Sea of Japan. The density of dead jellyfish was greater than that of live animals. The dead animals are heavier than the Japan Sea Proper Water which occurs deeper than 200 m, suggesting that dead jellyfish sink to the sea floor. The sea floor survey, conducted with a towed video tape recorder (VTR) monitoring system between mid September and mid October, observed a total of 138 jellyfish during 28 of 29 operations. The density of carrion ranged between 0.2 and 5.1 individuals/1,000 m² (mean ± SE = 1.1 ± 0.2). Ophiuroids occurred abundantly at 23 jellyfish carcasses and a sea anemone was observed attached to five carcasses. The VTR surveys confirmed that carrion sinks to the sea floor not only during the winter, the normal end of life for medusae, but also during the fall. A trap survey baited with medusae was also employed, and four different species were sampled with the traps: the snow crab (Chionoecetes opilio), a shrimp (Pandalopsis japonica), the ivory shell (Buccinum striatissimum) and an ophiuroid (Ophiura sarsii). Much of the trap bait remained (49–68% weight-mean = 60.3%) during the 23 h soak-time, and the reduction in weight was greater than that observed by bacterial decomposition, suggesting benthic animals consume dead organisms. The present study indicates that dead N. nomurai sink to the sea floor continuously and were subsequently consumed by benthic scavengers.     

Photodecomposition of humic acid and natural organic matter in swamp water using a TiO2-coated ceramic foam filter: Potential for the formation of disinfection byproducts

This paper reports on the photodecomposition of aqueous humic acid (HA) by a TiO₂-coated ceramic foam filter (TCF) reactor and on the potential for the formation of disinfection byproducts (DBPs) upon chlorination of the photocatalytically treated solutions. This photocatalytic reactor can also be applied to the removal of natural organic matter (NOM) in swamp waters. The proposed photocatalytic reaction system was operated as per standardized methodologies. First, the ability of the TCF to decompose HA (a representative compound of NOM) was evaluated from the changes in the total organic carbon (TOC) and UV₂₅₄ with the reaction time. Remarkably, TOC removal and UV₂₅₄ values ranging from 44% to 61% and from 60% to 83%, respectively, were achieved. The potential for the formation of DBPs (total trihalomethane and total haloacetic acid) by chlorination of the phototreated solution was strongly dependent on the TOC removal and UV₂₅₄ values in the solution. The degree of photodecomposition of NOMs in the swamp water samples and the DBP formation potential showed similar trends as in the case of the standard solutions containing HA. The method used in this study could be effectively used to evaluate the efficiency of TCF for reducing HA and NOM, while suppressing the formation of DBP products.