Influence of alumina coating on characteristics and effects of SiO2 nanoparticles in algal growth inhibition assays at various pH and organic matter contents

Silica nanoparticles (NPs) belong to the industrially most important NP types. In a previous study it was shown that amorphous SiO(2) NPs of 12.5 and 27.0 nm are stable in algal growth inhibition assays and that their ecotoxic effects are related to NP surface area. Here, it was hypothesized and demonstrated that an alumina coating completely alters the particle-particle, particle-test medium and particle-algae interactions of SiO(2) NPs. Therefore, stability and surface characteristics, dissolution, nutrient adsorption and effects on algal growth rate of both alumina coated SiO(2) NPs and bare SiO(2) NPs in OECD algal test medium as a function of pH (6.0-8.6) and natural organic matter (NOM) contents (0-12 mg C/l) were investigated. Alumina coated SiO(2) NPs aggregated in all media and adsorbed phosphate depending on pH and NOM concentration. On the other hand, no aggregation or nutrient adsorption was observed for the bare SiO(2) NPs. Due to their positive surface charge, alumina coated SiO(2) NPs agglomerated with Pseudokirchneriella subcapitata. Consequently, algal cell density measurements based on cell counts were unreliable and hence fluorescent detection of extracted chlorophyll was the preferred method. Alumina coated SiO(2) NPs showed lower toxicity than bare SiO(2) NPs at concentrations ≥46 mg/l, except at pH 6.0. At low concentrations, no clear pH effect was observed for alumina coated SiO(2) NPs, while at higher concentrations phosphate deficiency could have contributed to the higher toxicity of those particles at pH 6.0-6.8 compared to higher pH values. Bare SiO(2) NPs were not toxic at pH 6.0 up to 220 mg/l. Addition of NOM decreased toxicity of both particles. For SiO(2) NPs the 48 h 20% effect concentration of 21.8 mg/l increased 2.6-21 fold and a linear relationship was observed between NOM concentration and effective concentrations. No effect was observed for alumina coated SiO(2) NPs in presence of NOM up to 1000 mg/l. All experiments point out that the alumina coating completely altered NP interactions. Due to the difference in surface composition the SiO(2) NPs, which had the smallest surface area, were more toxic to the alga than the alumina coated SiO(2) NPs. Hence, surface modification can dominate the effect of surface area on toxicity.     

Carbon dioxide capture with concentrated,aqueous piperazine

Concentrated, aqueous piperazine (PZ) has been investigated as a novel amine solvent for carbon dioxide (CO₂) absorption. The CO₂ absorption rate of aqueous PZ is more than double that of 7 m MEA and the amine volatility at 40 °C ranges from 11 to 21 ppm. Thermal degradation is negligible in concentrated, aqueous PZ up to a temperature of 150 °C, a significant advantage over MEA systems. Oxidation of concentrated, aqueous PZ is appreciable in the presence of copper (4 mM), but negligible in the presence of chromium (0.6 mM), nickel (0.25 mM), iron (0.25 mM), and vanadium (0.1 mM). Initial system modeling suggests that 8 m PZ will use 10–20% less energy than 7 m MEA. The fast mass transfer and low degradation rates suggest that concentrated, aqueous PZ has the potential to be a preferred solvent for CO₂ capture.     

Modeling CO2 capture with aqueous monoethanolamine

Hilliard completed several thermodynamic models in Aspen Plus^® for modeling CO₂ removal with amine solvents, including MEA–H₂O–CO₂. This solvent was selected to make a system model for CO₂ removal by absorption/stripping. Both the absorber and the stripper used RateSep? to rigorously calculate mass transfer rates. The accuracy of the new model was assessed using a recent pilot plant run with 35 wt.% (9 m) MEA. Absorber loading and removal were predicted within 6%, and the temperature profile was approached within 5 °C. An average 3.8% difference between measured and calculated values was achieved in the stripper. A three-stage flash configuration which efficiently utilizes solar energy was developed. It reduces energy use by 6% relative to a simple stripper. Intercooling was used to reach 90% removal in the absorber at these optimized conditions.     

Effect of metal accumulation on metallothionein level and condition of the periwinkle Littorina littorea along the Scheldt estuary (the Netherlands)

Metal (i.e. Ag, As, Ca, Cd, Co, Cu, Mn, Pb and Zn) and metallothionein (MT) concentrations in the soft tissue of Littorina littorea were measured along the heavily polluted Western Scheldt (WS) and relatively clean Eastern Scheldt (ES) estuary. Along the WS metal and MT levels in periwinkles reflected the known downstream decreasing pollution gradient. Surprisingly in ES animals As, Mn and Zn concentrations decreased from east to west reflecting past pollution. Compared to the WS metal concentrations of ES periwinkles were significantly lower and both estuaries were maximally discriminated from each other based on their Cd soft tissue concentration using a canonical discriminant analysis. Furthermore, no overall difference was found in MT levels among animals from both estuaries. Using previously obtained condition data (i.e. dry/wet weight ratio and lipid content) the relation between soft tissue metal concentration (i.e. Cd, Cu and Zn) and fitness indicators (i.e. MT and condition data) was examined using a canonical correlation analysis. Periwinkles with a high metal load (i.e. Cd and Zn) also had high MT levels but were in a relatively poor condition.     

A European aerosol phenomenology – 3: Physical and chemical characteristics of particulate matter from 60 rural,urban, and kerbside sites across Europe

This paper synthesizes data on aerosol (particulate matter, PM) physical and chemical characteristics, which were obtained over the past decade in aerosol research and monitoring activities at more than 60 natural background, rural, near-city, urban, and kerbside sites across Europe. The data include simultaneously measured PM₁₀ and/or PM_2.5 mass on the one hand, and aerosol particle number concentrations or PM chemistry on the other hand. The aerosol data presented in our previous works (Van Dingenen et al., 2004, Putaud et al., 2004) were updated and merged to those collected in the framework of the EU supported European Cooperation in the field of Scientific and Technical action COST633 (Particulate matter: Properties related to health effects). A number of conclusions from our previous studies were confirmed. There is no single ratio between PM_2.5 and PM₁₀ mass concentrations valid for all sites, although fairly constant ratios ranging from 0.5 to 0.9 are observed at most individual sites. There is no general correlation between PM mass and particle number concentrations, although particle number concentrations increase with PM_2.5 levels at most sites. The main constituents of both PM₁₀ and PM_2.5 are generally organic matter, sulfate and nitrate. Mineral dust can also be a major constituent of PM₁₀ at kerbside sites and in Southern Europe. There is a clear decreasing gradient in SO₄^2? and NO₃^? contribution to PM₁₀ when moving from rural to urban to kerbside sites. In contrast, the total carbon/PM₁₀ ratio increases from rural to kerbside sites. Some new conclusions were also drawn from this work: the ratio between ultrafine particle and total particle number concentration decreases with PM_2.5 concentration at all sites but one, and significant gradients in PM chemistry are observed when moving from Northwestern, to Southern to Central Europe. Compiling an even larger number of data sets would have further increased the significance of our conclusions, but collecting all the aerosol data sets obtained also through research projects remains a tedious task.     

Are wages more important for employees in poorer countries with harsher climates?

The purpose of the present research was to demonstrate that the perceived importance of wages is a function of thermal climate and national wealth. As hypothesized, analyses of 37 nationally representative samples of 22 483 blue‐ and white‐collar workers and 5544 managers show that wages are perceived as more important in poorer countries with colder climates (e.g., Azerbaijan) than in richer countries with colder climates (e.g., Canada) and in poorer and richer countries with temperate climates (e.g., Uganda, Singapore). The results suggest that performance‐related pay may be most effective in poorer countries with colder climates. Copyright © 2007 John Wiley & Sons, Ltd.     

Including Riparian Vegetation in the Definition of Morphologic Reference Conditions for Large Rivers: A Case Study for Europe’s Western Plains

Methods for defining and retrieving reference conditions for large rivers were explored with emphasis on hydromorphologic and biologic quality indicators. For a set of four large rivers in the European Western Plains ecoregion, i.e., the rivers Meuse, Loire, Allier, and Dordogne, reference reaches were selected based on geomorphologic characteristics. A survey of riparian land use, vegetation, and bed geometry was done for the selected reaches. Responses of the riparian landscape to hydromorphologic conditions were determined with a set of existing and newly developed measures of riparian dynamics and forest development. Strong correlations were observed at the reach and local levels between the ratios of width to depth and embankment and the developed measures of riparian dynamics and forest. Boundary conditions for riparian forest development were determined for the hydromorphologic and biologic indicators of riparian dynamics and vegetation structure. These conditions also proved useful for determining the presence of sustainable populations of Populus nigra and Salix purpurea. From this agreement between abiotic and biotic boundary conditions, a set of useful reference conditions was determined, and a framework for the definition of reference and good status conditions subsequently evolved. Finally, a proposal for assessment and monitoring the proposed indicators is discussed for its applicability.     

Empirical relationship between precision and ultra-trace concentrations of PCDD/Fs and dioxin-like PCBs in biological matrices

Dioxin analysis in food and feed can be characterized as an analytical application where very high accuracy is required at very low levels of contamination. Gas chromatography (GC) in combination with 13C-label isotope dilution (ID) high resolution mass spectrometry (HRMS) is the reference congener-specific technique characterized by pronounced selectivity, precision and trueness at parts-per-trillion (ppt) and sub-parts-per-trillion (sub-ppt) levels. The quality of the analytical data produced routinely by a laboratory should be adequate for its intended purpose, i.e., one will seek a compromise between the cost and time needed and the consequences of incorrect decisions due to erroneous results. The requirements for reproducibility are usually dependent on the analyte concentrations and have been expressed in various empirical functions. While Horwitz or modified functions are widely useful for many purposes, it would be difficult to expect these functions to cover every analytical problem. This study reports on precision characteristics achieved by the GC-ID-HRMS reference method for polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and dioxin-like polychlorinated biphenyls (DL-PCBs) in food and feed in two interlaboratory method-performance studies among expert laboratories with long-standing experience in this field. Striking linear functions in log scale between reproducibility standard deviation and congener's level over a concentration range of 10(-8)-10(-14)g per g fresh weight are observed. The data fit very well to a Horwitz-type function of the form sR=0.153c0.904, where sR and c are dimensionless mass ratios expressed in pg g(-1) on fresh weight, regardless of the nature of the toxic congeners, food and feed matrices, or sample preparation methods. We demonstrate that the proposed function is suitable for use as a fitness-for-purpose criterion for proficiency assessment in interlaboratory comparisons on dioxins and related compounds in food.     

Probabilistic intake assessment of multiple compounds as a tool to quantify the nutritional-toxicological conflict related to seafood consumption

Seafood represents a natural source of valuable nutrients (e.g., long chain omega-3 poly-unsaturated fatty acids (LC n-3 PUFAs), vitamin D, and iodine), but the favourable health perception is troubled by the presence of contaminants (e.g., PCBs, dioxin-like compounds, and (methyl) mercury (MeHg)). This dualism forms the basis for an important public health conflict. The objective of this study was to calculate and evaluate the simultaneous intake of multiple beneficial and harmful compounds (LC n-3 PUFAs, vitamin D, iodine, (Me)Hg, PCBs, and dioxin-like compounds) via seafood consumption in Belgium. A methodology and a software module were developed for executing probabilistic assessments of the simultaneous intake of multiple compounds leading to better insight in the problematic nature of food items involving both health benefits and risks. The simulations concerning seafood consumption in Belgium predicted that, as far as only seafood consumption is concerned, the considered populations do not reach a sufficiently high intake for the three nutrients considered (LC n-3 PUFAs, vitamin D, and iodine). Regarding the contaminants, (Me)Hg contamination of seafood on the Belgian market does not seem to be an issue of major toxicological concern. In contrast, for dioxin-like compounds the tolerable daily intake is reached by people with high seafood consumption.     

Toxicity of imidacloprid to the terrestrial isopod Porcellio scaber (Isopoda, Crustacea)

Imidacloprid is a neonicotinoid insecticide with neurotoxic action that, as a possible alternative for commonly used organophosphorus pesticides, has gained registration in about 120 countries for use in over 140 agricultural crops. Only few data are available on its toxicity for soil invertebrates. We therefore assessed the effects of imidacloprid on survival, weight gain, feeding rate, total protein content, glutathione S-transferase activity (GST), and digestive gland epithelial thickness in juveniles and adults of the terrestrial isopod Porcellio scaber. After two weeks of feeding on imidacloprid-dosed food, weight gain (NOEC 5 microg/g dry food) and feeding rate (NOEC 10 microg/g) in juveniles, and feeding rate (NOEC<10 microg/g) and digestive gland epithelial thickness (NOEC<10 microg/g) in adults were most affected. In juveniles induction of GST activity and increase of total protein content per wet animal weight was detected at 5 microg/g dry food, whereas in adults a reduction of GST was observed at 25 microg/g (NOEC 10 microg/g). An estimate of actual intake rates suggests that imidacloprid affects isopods at similar exposure concentrations as insects. The toxicity of imidacloprid was similar to that of the organophosphorus pesticide diazinon, tested earlier using the same methods [Stanek, K., Drobne, D., Trebse, P., 2006. Linkage of biomarkers along levels of biological complexity in juvenile and adult diazinon fed terrestrial isopod (Porcellio scaber, Isopoda, Crustacea). Chemosphere 64, 1745-1752]. At actual environmental concentrations, diazinon poses a higher risk to P. scaber. Due to its increasing use in crop protection and higher persistence in soil, imidacloprid might however, be potentially more dangerous after long-term application. We conclude that toxicity testing with P. scaber provides relevant, repeatable, reproducible and comparable toxicity data that is useful for the risk assessment of pesticides in the terrestrial environment.