Heavy metal contamination in the vicinity of an industrial area near Bucharest

Background, aim, and scope

Heavy metals such as lead are well known to cause harmful health effects. Especially children are particularly susceptible to increased levels of lead in their blood. It is also a fact that lead concentration is increasing in the environment due to increased anthropogenic activity. The risk of heavy metal contamination is pronounced in the environment adjacent to large industrial complexes. In a combined case study, the environmental pollution by heavy metals was related to children’s health in the vicinity of an industrial area located 4 km south-east from Bucharest about 2 km east from the nearest town—Pantelimon. This site includes companies processing different, nonferrous solid wastes for recovery of heavy metals and producing different nonferrous alloys and lead batteries. In this paper, mainly the results of environmental sampling and analyses are summarized.

Materials and methods

Water, soil, and atmospheric deposition samples were collected from different locations within 3 km from the industrial area. For comparison, samples were also taken from Bucharest. Water samples were filtered (<0.45 μm), extracted by salpetric acid, and quantified by ICP-OES and ICP-MS. Soil samples were dried, sieved (<2 mm), extracted by aqua regia and analyzed by AAS. In order to quantify the atmospheric deposition, three kinds of permanently open collecting pots were used on nine different sites between August and November 2006.

Results

At most sampling locations, the heavy metal concentrations in soil decrease with increasing distance to the presumably major source of pollution. Highest heavy metal concentrations were found in 10–20 cm soil depths. There were also decreasing heavy metal concentrations for atmospheric deposition with increasing distance to the industrial site. In surface and groundwater samples, traces of zinc, copper and lead were detected.

Discussion

The heavy metal concentrations in soil were increased in the study area, mostly under legal action limits in low-concern areas (e.g., 1,000 mg Pb/kg dry soil), but often above action limits for high-concern areas (100 mg Pb/kg dry soil) such as populated areas. The soluble lead concentrations in water samples indicate a need for monitoring and assessing water quality in more detail. The results for atmospheric deposition showed increased dust precipitation and heavy metal loads in the study area compared to Bucharest. However, based on mass flow balance calculations, the actual atmospheric deposition of heavy metals must be much lower than it was in the past decades.

Conclusions

It was shown that highest lead values in water, soil and atmospheric deposition are rather to be found near the investigated industrial site than at the control sites in Bucharest. Our results correspond very well with results that show that children from Pantelimon have significantly increased lead concentrations in their blood compared to children in Bucharest. The increased lead contamination around the investigated industrial area is likely to have caused the increased exposure for children living in Pantelimon.

Recommendations and perspectives

In high-concern areas, such as found in populated areas, further measures have to be taken to avoid health risks for people living in these areas. The measures already taken to reduce emissions from the industrial site will help to avoid further increases in heavy metal concentrations. In areas with exceeded action limits, measures have to be taken as required by law. Detailed risk assessments could help to take necessary actions to protect public health in this area. The public should be informed about the potential hazards of eating plants grown in that area. Educational programs for schools, informing children about the contamination, should lead to a better understanding of environmental problems and a more sustainable behavior in the future.

     

Catalytic oxidation processes for removing dimethylsulfoxide from wastewater

An effective method for removing dimethylsulfoxide (DMSO) from wastewater, based on the mild selective catalytic sulfoxidation with H(2)O(2), is proposed in this study. The catalysts are W-containing layered double hydroxides (LDH), and they were obtained by ionic exchange of the nitrate anions from MAl-LDH precursors (M=Mg(2+) or Zn(2+)) with both WO(4)(2-) and W(7)O(24)(6-) species. Results of X-ray diffraction (XRD), N(2) adsorption, thermal gravimetric analysis (TGA), diffuse reflectance ultraviolet spectroscopy (DRUV) and Raman spectroscopy confirmed the formation of the W-oxospecies inside the interlayer space and the modification of the textural properties upon the exchange process. All catalysts showed very good activity and stability in the DMSO conversion into dimethylsulfone with dilute H(2)O(2) aqueous solution, at low temperatures (20-50 degrees C). The efficiency of the H(2)O(2) was higher than 95% and the behaviour of the water as solvent was very close to that of the organic solvents (ethanol, acetonitrile, 1,4-dioxane).     

Air pollution, precipitation chemistry and forest health in the Retezat Mountains, Southern Carpathians, Romania

In the Retezat Mountains concentrations of O3, NO2 and SO2 in summer season 2000-2002 were low and below toxicity levels for forest trees. While NH3 concentrations were low in 2000, the 2001 and 2002 concentrations were elevated indicating possibility for increased N deposition to forest stands. More than 90% of the rain events were acidic with pH values <5.5, contributing to increased acidity of soils. Crown condition of Norway spruce (Picea abies) and European beech (Fagus sylvatica) was good, however, defoliation described as >25% of foliage injured increased from 9.1% in 2000 to 16.1% in 2002. Drought that occurred in the southern Carpathians between fall 2000 and summer 2002 and frequent acidic rainfalls could cause the observed decline of forest condition. Both Norway spruce and European beech with higher defoliation had lower annual radial increments compared to the trees with low defoliation. Ambient O3 levels found in the Retezat did not affect crown condition of Norway spruce or European beech.     

Pyrolysis of the tetra pak

This study deals with pyrolysis of tetra pak which is widely used as an aseptic beverage packaging material. Pyrolysis experiments were carried out under inert atmosphere in a batch reactor at different temperatures and by different pyrolysis modes (one- and two-step). The yields of char, liquid and gas were quantified. Pyrolysis liquids produced were collected as three separate phases; aqueous phase, tar and polyethylene wax. Characterization of wax and the determination of the total amount of phenols in aqueous phase were performed. Chemical compositions of gas and char products relevant to fuel applications were determined. Pure aluminum can be also recovered by pyrolysis.     

Cadmium partition in river sediments from an area affected by mining activities

In this paper, the cadmium distribution in Certej River sediments in an area seriously affected by intense mining activities has been studied. The main objective of this study was the evaluation of partition of this metal into different operational defined fractions by sequential extractions. Community Bureau of Reference (BCR) sequential extraction was used to isolate different fractions. The sediment quality was assessed both upstream and downstream the pollution input points, along the Certej River, in order to reveal a possible accumulation of cadmium in sediments and the seasonal changes in cadmium concentrations in BCR sediment phases. Our results reveal that most of the cadmium content is divided between both the soluble and iron and manganese hydrated oxide fractions. Based on total cadmium concentrations in sediments, the enrichment factors were estimated using aluminum as normalizing element and the regression curve Cd/Al corresponding to the geochemical background of the studied area.     

Novel Environmentally Friendly Copolymers Carboxymethyl Starch Grafted Poly(Lactic Acid)

Modified natural polymers have been gaining increasing scientific interest for many years. In this study carboxymethyl starch (CMS) was grafted with L(+)-lactic acid (LA) in different molar ratios CMS/LA (1/36, 1/22 and 1/12), resulting carboxymethyl starch-g-poly(lactic acid) (CMS-g-PLA) copolymers. The grafting reaction was carried out by solution polycondensation procedure in toluene and stannous 2-ethyl hexanoate Sn(Oct)₂ as catalyst was utilized. Poly(lactic acid) (PLA) was synthesized in the same conditions with the copolymers for comparative analyses of the physico-chemical and thermal properties. The copolymers and PLA were structurally and morphologically characterized by FT-IR, ¹H-NMR spectroscopy, WAXD and SEM analyses, taking CMS as reference. The molecular weight of the copolymers, CMS and PLA were determined, using a dynamic light scattering technique. The thermal behavior of the products was studied by DSC and TG-DTG analyses. The CMS-g-PLA graft copolymers exhibited lower Tg and thermal stability than pure CMS.     

Dynamics of phosphorus forms in the bottom sediments and their interstitial water for the Prut River (Moldova)

Phosphorus concentration in rivers results from both external inputs and internal loading from the bottom sediments. Seasonal, spatial, and multi-annual dynamics of phosphorus forms in bottom sediments and their interstitial water for the river Prut (Moldova) were evaluated. In order to determine content of total phosphorus in the bottom sediments, fresh (wet) samples were subjected to persulfate oxidation. The content of inorganic phosphorus was determined after acidic oxidation of samples. The amount of organic phosphorus was obtained by subtracting inorganic phosphorus from the amount of total phosphorus. Content of phosphorus forms in interstitial water was determined after centrifugation of fresh (wet) sediments. In general, the shape of dynamics of the amounts of inorganic phosphorus in sediments was close during years?2009, 2010, and 2011, with registered higher contents of this form on the middle course of the river. The spatial dynamics of organic phosphorus is less homogeneous along the Prut River. During 2009, higher amounts of organic phosphorus were recorded on the middle sector. During the spring of year?2010, the content of organic phosphorus in sediments was practically not changed along the river. The ratio of inorganic/organic phosphorus in bottom sediments was similar during the researched years, with the predominance of the inorganic phosphorus being recorded. Also, the increasing tendency of the percentage of organic phosphorus from spring to summer was identified. Generally, appropriate spatial and seasonal dynamics of phosphorus forms in bottom sediments and their interstitial water were recorded, although sometimes with some differences.     

Genetic algorithm optimisation of water consumption and wastewater network topology

Genetic algorithm (GA) optimisation applied to water systems with multiple contaminants and several contaminated sources is presented. This approach generates the overall optimal water network topology with respect to the minimum supply water usage, complying, in the same time, with all restrictions. An optimal water network could be viewed as an oriented graph, starting from unit operations which must not have contaminants at entrance (inlet contaminants-free unit operations), every next unit operation i receiving streams from the previous operations j only (j = 1, 2,…,i−1), and sending streams to the next operations j (j = i + 1, i + 2,…,N). The mathematical model describing the unit i is based upon total and contaminant species’ mass balances, together with the input and output constraints. Solving this optimisation problem is not trivial, since the unknowns' number, determines the number of equations. The GA optimisation uses each network's internal flow as a gene, assembling the topology into a chromosome. The restrictions, in terms of minimum and maximum allowable flows for each gene, are dealt with naturally, during the population generation, simply rejecting those genes outside their feasible domain. The individuals are interbred according to their frequency of selection, using the one-point crossover method, and then mutations are applied to randomly selected individuals. The objective function is the total supply water consumption, which should be minimised.