Multiple effects of chromate on the photosynthetic apparatus of Spirodela polyrhiza as probed by OJIP chlorophyll a fluorescence measurements

Chromate (Cr) decreases the growth of Spirodela polyrhiza. The fronds lost their pigments. The O2 evolution was also decreased. The Cr effect was found to be dose dependent. The toxic effects of Cr have further been studied on the photosynthetic activity of Spirodela polyrhiza by means of the chlorophyll a (Chl a) fluorescence transient O-J-I-P. The Chl a fluorescence transients were recorded in vivo with high time resolution and analyzed according to the JIP-test which can quantify the photosystem II behavior. Cr treated plants show a decrease in yield for primary photochemistry, phi Po. The performance index of PSII, PIABS, which is the combination of the indexes of three independent parameters, (1) the total number of active reaction centers per absorption (RC/ABS), (2) yield of primary photochemistry (phi Po) and (3) efficiency with which a trapped exciton can move an electron into the electron transport chain (psi 0), decreased due to Cr treatment. Chromate sensitivity varies within plant populations. In summary Cr affects several targets of PSII. More specifically, the main targets of Cr, according to the JIP-test, can be listed as a decrease in the number of active reaction centers and damage to the oxygen-evolving complex.     

On the hydro-dispersive equivalence between multi-layered mineral barriers

In the context of municipal solid waste and hazardous waste disposal, the notion of "equivalence" between different barrier designs appears in regulatory documents from several industrialized countries. While in the past, equivalence has been thought of mainly in terms of contaminant travel times, in recent years it has been defined more in terms of the magnitude of a disposal site's potential impact on groundwater resources. This paper presents some original analytical solutions to the problem of contaminant migration through a multi-layered mineral barrier. The solutions account for the two major mechanisms of subsurface contaminant migration, namely, advection and diffusion-dispersion. An example application using the proposed solutions and a numerical model illustrates how one multi-layered mineral barrier can be considered superior to another from a strictly hydro-dispersive viewpoint. The influence of partial saturation of the mineral barrier is investigated using a numerical solution to the Richards equation for unsaturated flow. It is emphasized that conclusions relative to the superiority of one multi-layered barrier, with respect to another, should not only consider hydro-dispersive aspects, but also other processes such as the mechanical and chemical evolutions of the different barrier components. Although such phenomena are poorly addressed by existing models, failure to take them into account, at least in a qualitative fashion, may lead to unconservative conclusions with respect to barrier equivalence.     

Sources of PM10 and sulfate aerosol at McMurdo Station, Antarctica

Source contributions to PM10 and sulfate aerosol at McMurdo Station, Antarctica during the austral summers of 1995-1996 and 1996-1997 were estimated using Chemical Mass Balance (CMB) receptor modeling. The average PM10 (particles with aerodynamic diameters less than 10 microm) concentration at Hut Point, located less than 1 km downwind of downtown McMurdo, was 3.4 microg/m3. Emissions profiles were determined for potentially important aerosol source types in McMurdo: exposed soil, power generation, space heating, and surface vehicles. Soil dust, sea salt, combustion emissions, sulfates, marine biogenic emissions as methanesulfonate, and nitrates contributed 57%, 15%, 14%, 10%, 3%, and 1%, respectively, of average estimated PM10 at Hut Point (3.2 microg/m3). Soil dust, sea salt, and combustion sources contributed 12%, 8%, and 20%, respectively, of the average PM10 sulfate concentration of 0.46 microg/m3. Marine biogenic sources contributed 0.17 microg/m3 (37%). The remaining sulfate is thought to have come from emissions from Mt. Erebus or hemispheric pollution sources.     

H2O2 formation from photocatalytic processes at the ZnO/water interface

The paper focuses on the production of H2O2 by photocatalysis over ZnO in an aerated aqueous phase. The presence of different reductants that increase the H2O2 production in the aqueous phase is analysed; particular attention is paid to nitrite, which has been shown to be the reductant that produces the most significant increments in the H2O2 production. The photocatalytic anodic decomposition of ZnO in the presence of the different reductants is also investigated. From the results obtained, the relevance of the ZnO photocatalysis in the formation of environmental hydrogen peroxide is estimated.     

The disposition and metabolism of tetrabromobisphenol-A after a single i.p. dose in the rat.

Tetrabromobisphenol-A (TBBP-A) is used as a reactive (primary use) or an additive flame retardant and as an intermediate in the production of other flame retardants. In our study TBBP-A[14C] was administered intraperitoneally (i.p.) in a single dose of 250 or 1000 mg/kg body weight (about 300 kBq per animal). The level of radioactivity in erythrocytes was 10 times higher than in plasma 72 h after the administration. In all examined tissues the peak level of 14C could be observed within the first hour after the administration, and the highest concentrations were detected in the fat tissue, followed by liver, sciatic nerve, muscles and adrenals. Total excretion in faeces 72 h after the administration was about 51-65% of the dose, whereas in urine it was only 0.3%. About 20% was still retained in the rat organism.     

Laboratory and field evaluation of measurement methods for one-hour exposures to O3, PM2.5, and CO.

While researchers have linked acute (less than 12-hr) ambient O3, PM2.5, and CO concentrations to a variety of adverse health effects, few studies have characterized short-term exposures to these air pollutants, in part due to the lack of sensitive, accurate, and precise sampling technologies. In this paper, we present results from the laboratory and field evaluation of several new (or modified) samplers used in the "roll-around" system (RAS), which was developed to measure 1-hr O3, PM2.5, and CO exposures simultaneously. All the field evaluation data were collected during two sampling seasons: the summer of 1998 and the winter of 1999. To measure 1-hr O3 exposures, a new active O3 sampler was developed that uses two nitrite-coated filters to measure O3 concentrations. Laboratory chamber tests found that the active O3 sampler performed extremely well, with a collection efficiency of 0.96 that did not vary with temperature or relative humidity (RH). In field collocation comparisons with a reference UV photometric monitor, the active O3 sampler had an effective collection efficiency ranging between 0.92 and 0.96 and a precision for 1-hr measurements ranging between 4 and 6 parts per billion (ppb). The limits of detection (LOD) of this method were 9 ppb-hr for the chamber tests and approximtely 16 ppb-hr for the field comparison tests. PM2.5 and CO concentrations were measured using modified continuous monitors--the DustTrak and the Langan, respectively. A size-selective inlet and a Nafion dryer were placed upstream of the DustTrak inlet to remove particles with aerodynamic diameters greater than 2.5 microm and to dry particles prior to the measurements, respectively. During the field validation tests, the DustTrak consistently reported higher PM2.5 concentrations than those obtained by the collocated 12-hr PM2.5 PEM samples, by approximately a factor of 2. After the DustTrak response was corrected (correction factor of 2.07 in the summer and 2.02 in the winter), measurements obtained using these methods agreed well with R2 values of 0.87 in the summer and 0.81 in the winter. The results showed that the DustTrak can be used along with integrated measurements to measure the temporal and spatial variation in PM2.5 exposures. Finally, during the field validation tests, CO concentrations measured using the Langan were strongly correlated with those obtained using the reference method when the CO levels were above the LOD of the instrument [approximately 1 part per million (ppm)].     

A comparison of the effects of organophosphate insecticide exposure and temperature stress on fluctuating asymmetry and life history traits in Culex quinquefasciatus.

Effects of exposure to a non-chemical (temperature) or chemical (organophosphate insecticide) stressor during larval development were compared in Culex quinquefasciatus mosquitoes. Stress was measured in two ways: using conventional life history traits (survival, development time and a measure of body size) and by calculating the degree of developmental instability from the departure from bilateral symmetry of wing characters (fluctuating asymmetry). Increasing insecticide dose, but not temperature, was observed to elevate wing fluctuating asymmetry in male but not female mosquitoes. Insecticide treatment reduced survival and was associated with a significant reduction in wing trait sizes in both females and males but did not significantly affect development time. Temperature was associated with a significant reduction in all life history traits in both sexes. Therefore wing fluctuating asymmetry in C. quinquefasciatus cannot be used as a general biomonitor of all stress, although it may have potential as a more specific monitor of chemical stress. It needs to be complimented with other measures such as life history and biochemical methods. The significant differences in response between sexes may impact on results of short-term larval exposures to insecticides.     

Seasonal variations in phosphorus species in the surface sediments of the Gulf of Riga, Baltic Sea.

The redox-dependent variations in concentrations of phosphorus at two different accumulation bottom areas were investigated in the Gulf of Riga (Baltic Sea) between December 1993 and January 1995. The sediment samples from nine sampling occasions were analyzed for phosphorus forms and redox potential. The average concentrations of total phosphorus measured in 0-1 cm (65 and 89 micromol P g(-1) for sites G5 and T3, respectively) were among the highest reported from the entire Baltic Sea. Redox-dependent "mobile" phosphorus (MP) contributed more than 50% of total in the uppermost-oxidized centimeter, whereas in reduced layers it was 16-18% throughout the year. The significant differences (ANOVA, P<0.01) among months of inorganic phosphorus (IP) concentration at 0-1 cm were observed at site G5 due to temporary accumulation of mobile phosphorus mediated by redox-dependent bacteria activity during summer. On the contrary no accumulation was observed at T3 probably as a result of low redox potential caused by high accumulation rates and low bioturbation. Although the water column above sediments remained oxic throughout the investigation period, the redox potential at site T3 was close to the redoxcline (i.e., +230 mV) during summer. Further increase of eutrophication might lead to development of anoxic conditions at sediment-water interface and that in turn will result in rapid release of redox-dependent phosphorus stored in surface sediments. The availability of excess phosphorus will further enhance eutrophication in partly phosphorus-limited Gulf of Riga.     

Monitoring method for airborne glymes and its application in fuel exhaust emission measurement.

A monitoring method based on solvent extraction of adsorbed target glymes followed by gas chromatograph-mass spectrometry GC-MS analysis was developed for seven glymes, namely ethylene glycol dimethyl ether, propylene glycol dimethyl ether, ethylene glycol diethyl ether, diethylene glycol dimethyl ether, diethylene glycol diethyl ether, triethylene glycol dimethyl ether, and tetraethylene glycol dimethyl ether. The best recoveries of target glymes were achieved when using a combination of sample collection medium of graphitised carbon black (GCB) with a solvent mixture of methylene chloride and methanol (95/5, v/v). Method detection limits ranged from 1.5 microg/m3 for diethylene glycol diethyl ether to 13.2 microg/m3 for ethylene glycol diethyl ether based on a sample volume of 3.4 1. Using this method, diethylene glycol dimethyl ether and diethylene glycol diethyl ether were detected and measured successfully in diluted vehicle exhausts in diesel fuel engine tests.     

Metals in sediments and the edible cockle Cerastoderma edule from two Moroccan Atlantic lagoons: Moulay Bou Selham and Sidi Moussa.

Metals (Cd, Cu, Pb and Zn) were determined over a 3-year period in sediments and bivales Cerastoderma edule from two lagoon ecosystems on the Moroccan Atlantic coastline, Moulay Bou Selham and Sidi Moussa. Sediment metal concentrations were seasonally influenced, and were highest, generally, in winter--possibly signifying an increased contribution from run-off from adjacent arable land and roads. Neither site can be considered highly contaminated; however, Cd was enriched at Sidi Moussa, probably as a result of waste discharge from phosphate industries 20 km along the coast to the northeast. This ability to act as a sink for metals at distance from sources demonstrates the need for surveillance in these sensitive environments. Copper and Zn concentrations in edible cockles C. edule appear to be regulated over the concentration ranges currently found in lagoon sediments. In contrast, body burdens of Pb and, to a lesser extent Cd, reflect sediment levels and might be useful in future risk assessments. Metal concentrations Cerastoderma edule are seasonally related to the reproductive cycle, however, and sample timing will need to be standardised in future monitoring exercises.