Distribution of organochlorine pesticides and heavy metal residues in fish and shellfish from Calicut region, Kerala, India

Fish collected from five different locations from the Calicut region, India were analysed for the levels of organochlorine pesticides (OCPs) and heavy metal (HM) residues in order to elucidate the status of these chemical contaminants in fish and shellfish meant for human consumption. The highest concentrations of OCPs detected in the edible portion of fish were 10.47, 70.57 and 28.35 ng g-1 wet weight, in marine, brackish water and freshwater, respectively. BHC and heptachlor epoxide formed the major share of OCPs in the marine fish while BHCs contributed to the major share in the freshwater and brackish water fish. The DDT (sum of DDT and its metabolites) ranged from 0.05 to 8 ng g-1 in the samples irrespective of the habitat. Among the HMs, Cu, Zn, Mn and Cr were present in the samples irrespective of the place of collection. About 22% of the samples from the freshwater area contained marginally higher lead content above the legal limit of 0.2-0.4 microg g-1. The Cr content ranged from 0.1 to 1.1 microg g-1 in the fish with marginally higher content in the fish from freshwater and marine regions (0.55-1.1 microg g-1). Mercury was detected in the samples (55%) from marine habitat only. The concentrations of OCPs and HMs in the samples, in general, were below the maximum residual level recommended by various organizations.     

An analysis of effects of San Diego wildfire on ambient air quality

The impact of major gaseous and particulate pollutants emitted by the wildfire of October 2003 on ambient air quality and health of San Diego residents before, during, and after the fire are analyzed using data available from the San Diego County Air Pollution Control District and California Air Resources Board. It was found that fine particulate matter (PM) levels exceeded the federal daily 24-hr average standard during the fire. There was a slight increase in some of the gaseous pollutants, such as carbon monoxide, which exceeded federal standards. Ozone (O3) precursors, such as total hydrocarbons and methane gases, experienced elevated concentration during the fire. Fortunately, the absence of sunlight because of the cloud of thick smoke that covered most of the county during the fire appears to have prevented the photochemical conversion of the precursor gases to harmful concentrations of O3. Statistical analysis of the compiled medical surveillance data has been used to establish correlations between pollutant levels in the region and the resultant health problems experienced by the county citizens. The study shows that the increased PM concentration above the federal standard resulted in a significant increase in hospital emergency room visits for asthma, respiratory problems, eye irritation, and smoke inhalation. On the basis of the findings, it is recommended that hospitals and emergency medical facilities engage in pre-event planning that would ensure a rapid response to an impact on the healthcare system as a result of a large wildfire and appropriate agencies engage in the use of all available meteorological forecasting resources, including real-time satellite imaging assets, to accurately forecast air quality and assist firefighting efforts.     

Effect of halides in the electrochemical treatment of distillery effluent

Electrochemical treatment can solve the problems arising due to effluents and offer an effective alternative to the existing methods. An undivided static electrolyser was charged with distillery effluent and the organics were oxidized electrochemically. Anodized graphite plate anodes and graphite cathodes were used for the treatment of distillery effluent. The effect of pH and current density on the treatment was studied. Sodium fluoride, sodium chloride and sodium bromide were chosen as electrolyte and their influence was found out. Complete decolorization has been observed in all cases. A maximum of 93.5% of biological oxygen demand reduction, 85.2% of chemical oxygen demand reduction and 98.0% absorbance reduction were obtained in the presence of sodium chloride as supporting electrolyte. Probable mechanism was also proposed for the oxidation of organics present in the effluent.     

Oxidative environment causes molecular remodeling in embryonic heart—a metabolomic and lipidomic fingerprinting analysis

Environmental Science and Pollution Research - Environmental factors including pollution affect human health, and the unifying factor in determining toxicity and pathogenesis for a wide array of...     

Defining the Photochemical Contribution to Particulate Matter in Urban Areas Using Time-Series Analysis

Abstract

The objective of this project is to demonstrate how the ambient air measurement record can be used to define the relationship between O₃ (as a surrogate for photochemistry) and secondary particulate matter (PM) in urban air. The approach used is to develop a time-series transfer-function model describing the daily PM₁₀ (PM with less than 10 μm aerodynamic diameter) concentration as a function of lagged PM and current and lagged O₃, NO or NO₂, CO, and SO₂. Approximately 3 years of daily average PM₁₀, daily maximum 8-hr average O₃ and CO, daily 24-hr average SO₂ and NO₂, and daily 6:00 a.m.-9:00 a.m. average NO from the Aerometric Information Retrieval System (AIRS) air quality subsystem are used for this analysis. Urban areas modeled are Chicago, IL; Los Angeles, CA; Phoenix, AZ; Philadelphia, PA; Sacramento, CA; and Detroit, MI. Time-series analysis identified significant autocorrelation in the O₃, PM₁₀, NO, NO₂,CO, and SO₂ series. Cross correlations between PM₁₀ (dependent variable) and gaseous pollutants (independent variables) show that all of the gases are significantly correlated with PM₁₀ and that O₃ is also significantly correlated lagged up to two previous days. Once a transfer-function model of current PM₁₀ is defined for an urban location, the effect of an O₃-control strategy on PM concentrations is estimated by calculating daily PM₁₀ concentrations with reduced O₃ concentrations. Forecasted summertime PM₁₀ reductions resulting from a 5 percent decrease in ambient O₃ range from 1.2 μg/m³ (3.03%) in Chicago to 3.9 μg/m³ (7.65%) in Phoenix.     

Defining the photochemical contribution to particulate matter in urban areas using time-series analysis

The objective of this project is to demonstrate how the ambient air measurement record can be used to define the relationship between O3 (as a surrogate for photochemistry) and secondary particulate matter (PM) in urban air. The approach used is to develop a time-series transfer-function model describing the daily PM10 (PM with less than 10 microm aerodynamic diameter) concentration as a function of lagged PM and current and lagged O3, NO or NO2, CO, and SO2. Approximately 3 years of daily average PM10, daily maximum 8-hr average O3 and CO, daily 24-hr average SO2 and NO2, and daily 6:00 a.m.-9:00 a.m. average NO from the Aerometric Information Retrieval System (AIRS) air quality subsystem are used for this analysis. Urban areas modeled are Chicago, IL; Los Angeles, CA; Phoenix, AZ; Philadelphia, PA; Sacramento, CA; and Detroit, MI. Time-series analysis identified significant autocorrelation in the O3, PM10, NO, NO2, CO, and SO2 series. Cross correlations between PM10 (dependent variable) and gaseous pollutants (independent variables) show that all of the gases are significantly correlated with PM10 and that O3 is also significantly correlated lagged up to two previous days. Once a transfer-function model of current PM10 is defined for an urban location, the effect of an O3-control strategy on PM concentrations is estimated by calculating daily PM10 concentrations with reduced O3 concentrations. Forecasted summertime PM10 reductions resulting from a 5 percent decrease in ambient O3 range from 1.2 microg/m3 (3.03%) in Chicago to 3.9 microg/m3 (7.65%) in Phoenix.     

Aminolytic Depolymerization of Polyethylene Terephthalate Wastes Using Sn-Doped ZnO Nanoparticles

Journal of Polymers and the Environment - Poly(ethylene terephthalate) (PET) is one of the most consumed polymers because of its excellent thermal and mechanical properties. By increasing in PET...